Couplage okydatif facile d'anions substitues captodativement

Carbanions carrying captodative substitution are readily oxidized to their dimers.     

Coordination chemistry of the soluble metal oxide analogue [Mo5O13(OCH3)4(NO)]3- with manganese carbonyl species

The reactions of neutral or cationic manganese carbonyl species towards the oxo-nitrosyl complex [Na(MeOH)[Mo(5)O(13)(OCH(3))(4)(NO)]](2-) have been investigated in various conditions. This system provides an unique opportunity for probing the basic reactions involved in the preparation of solid oxide-supported heterogeneous catalysts, that is, mobility of transition-metal species at the surface and dissolution-precipitation of the support. Under nitrogen and in the dark, the reaction of in situ generated fac-[Mn(CO)(3)](+) species with (nBu(4)N)(2)[Na(MeOH)-[Mo(5)O(13)(OMe)(4)(NO)]] in MeOH yields (nBu(4)N)(2)[Mn(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]] at room temperature, while (nBu(4)N)(3)[Na[Mo(5)O(13)(OMe)(4)(NO)](2)[Mn(CO)(3)](2)] is obtained under reflux. The former transforms into the latter under reflux in methanol in the presence of sodium bromide; this involves the migration of the fac-[Mn(CO)(3)](+) moiety from a basal kappa(2)O coordination site to a lateral kappa(3)O site. Oxidation and decarbonylation of manganese carbonyl species as well as degradation of the oxonitrosyl starting material and reaggregation of oxo(methoxo)molybdenum fragments occur in non-deareated MeOH, and both (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(16)(OMe)(2)](2)[Mn(CO)(3)](2)] and (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(13)(OMe)(4)(NO)](2)] as well as (nBu(4)N)(2)[MnBr[Mo(5)O(13)(OMe)(4)(NO)]] have been obtained in this way. The rhenium analogue (nBu(4)N)(2)[Re(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]] has also been synthesized. The crystal structures of (nBu(4)N)(2)[Re(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]], (nBu(4)N)(3)[Na[Mo(5)O(13)(OMe)(4)(NO)](2)[Mn(CO)(3)](2)], (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(16)(OMe)(2)](2)[Mn(CO)(3)](2)], (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(13)(OMe)(4)(NO)](2)] and (nBu(4)N)(2)[MnBr[Mo(5)O(13)(OMe)(4)(NO)]] have been determined.     

Solid-State and solution studies of [Ln(n)(SiW11O39)] polyoxoanions: an example of building block condensation dependent on the nature of the rare earth

The reactivity of the [alpha-SiW(11)O(39)](8-) monovacant polyoxometalate with lanthanide has been investigated for four different trivalent rare-earth cations (Ln = Nd(III), Eu(III), Gd(III), Yb(III)). The crystal structures of KCs(4)[Yb(alpha-SiW(11)O(39))(H(2)O)(2)] x 24H(2)O (1), K(0.5)Nd(0.5)[Nd(2)(alpha-SiW(11)O(39))(H(2)O)(11)] x 17H(2)O (2a), and Na(0.5)Cs(4.5)[Eu(alpha-SiW(11)O(39))(H(2)O)(2)] x 23H(2)O (3a) are reported. The solid-state structure of compound 1 consists of linear wires built up of [alpha-SiW(11)O(39)](8-) anions connected by Yb(3+) cations, while the linkage of the building blocks by Eu(3+) centers in 3a leads to the formation of zigzag chains. In 2a, dimeric [Nd(2)(alpha-SiW(11)O(39))(2)(H(2)O)(8)](10-) entities are linked by four Nd(3+) cations. The resulting chains are connected by lanthanide ions, leading to a bidimensional arrangement. Thus, the dimensionality, the organization of the polyoxometalate building units, and the Ln/[alpha-SiW(11)O(39)](8-) ratio in the solid state can be tuned by choosing the appropriate lanthanide. The luminescent properties of compound 3a have been studied, showing that, in solution, the polymer decomposes to give the monomeric complex [Eu(alpha-SiW(11)O(39))(H(2)O)(4)](5-). The lability of the four exogenous ligands connected to the rare earth must allow the functionalization of this lanthanide polyanion.     

Structure and properties of (1−x)(0.6Pb(Zn1/3Nb2/3)O3-0.4Pb (Mg1/3Nb2/3)O3)-xPbTiO3 thin films with perovskite phase promoted by polyethylene glycol

The preferential formation of a pyrochlore structure is a knotty problem in the preparation of Pb(Zn_1/3Nb_2/3)O₃ (PZN)-based thin film materials and its presence is significantly detrimental to the dielectric and piezoelectric properties. In this study, 40 mol% of PZN was replaced with Pb(Mg_1/3Nb_2/3)O₃ (PMN) for obtaining a perovskite composition around a morphotropic phase boundary (MPB), (1−x)(0.6PZN-0.4PMN)-xPT ((1−x)PZMN-xPT, PT: PbTiO₃) where x = 0.23. The thin films with this composition were prepared with a polyethylene glycol (PEG) modi-fied sol-gel method on LaAlO₃ substrates. The microstructural evolution of the films on heat treatment was examined with X-ray diffraction. With the aid of PEG, the formation of the pyrochlore phase was suppressed and the perovskite phase formed directly from the amorphous gel film. The multilayer films with a thickness around 0.25 μm showed a single perovskite phase without any detectable pyrochlore structure. Microscopic images showed uniform grain size of a few tens of nanometers. The role of the polymer dramatically promoting the perovskite phase was investigated with the aid of X-ray photoelectron spectroscopy and thermal analysis. The dielectric constant of the obtained film was 4160 at 1 kHz. The film demonstrated typical ferroelectric hysteresis loops and exhibited excellent piezoelectric performance.     

Deprotonation of chloropyridines using lithium magnesates

4-Chloropyridine was deprotonated on treatment with 1/3 equiv of the highly coordinated magnesate Bu₃(TMP)MgLi₂ in THF at −10 °C, as evidenced by trapping with I₂. The use of Bu(TMP)₂MgLi in Et₂O allowed the reaction of 2-chloropyridine, giving the 3-functionalized derivative as the main product. Mixtures of 3- and 4-functionalized derivatives were obtained when 2,6-dichloropyridine was involved in the reaction. Performing the reaction on 3-chloropyridine with lithium magnesates in THF, either the 4,4′-dimer or the 4-iodo derivative was formed after quenching by I₂, the former using 1/3 equiv of Bu₂(TMP)MgLi and the latter using 1 equiv of (TMP)₃MgLi. Similar results were observed with 3,5-dichloropyridine, 2,5-dichloropyridine and 3-chloro-2-fluoropyridine. 1,2-Migration of the lithium arylmagnesate formed by deprotonation was proposed to justify the dimers formation.     

Oxidation of Oxazolines and Thiazolines to Oxazoles and Thiazoles. Application of the Kharasch-Sosnovsky Reaction

Using a modification of the Kharasch-Sosnovsky reaction, the oxidation of oxazolines and thiazolines bearing a variety of 2-alkyl substituents (chiral and achiral) were smoothly oxidized to their corresponding oxazoles and thiazoles, respectively. The key feature involved in the successful implementation of this important oxidation was the use of a mixture of Cu(I) and Cu(II) salts to enhance the oxidation of the intermediate captodative radical, 24. The main limitation of this method was shown when the oxidation failed with oxazolines/thiazolines lacking the carboalkoxy group at C-4.     

Electron-rich radicals by neutralizationreionization mass spectrometry. Generation, dissociations and energetics of the hydrogen atom adduct to acetamide

Protonated acetamide exists as two planar conformers, the more stable anti-form (anti-1(+)) and the syn-form (syn-1(+)), DeltaG(degree) (298) (anti-->syn) = 10.8 kJ mol(-1). Collisional neutralization of 1(+) produces 1-hydroxy-1-amino-1-ethyl radicals (anti-1 and syn-1) which in part survive for 3.7 micros. The major dissociation of 1 is loss of the hydroxyl hydrogen atom (approximately 95%) which is accompanied by loss of one of the methyl hydrogen atoms (approximately 3%) and loss of the methyl group (approximately 2%). The most favorable dissociation of the OH bond is calculated to be only 34 kJ mol(1) endothermic but requires 88 kJ mol(-1) in the transition state. Other dissociations of 1, e.g., loss of one of the amide hydrogens, methyl hydrogens, and loss of ammonia are calculated to proceed through higher- energy transition states and are not kinetically competitive if proceeding from the ground doublet electronic state of 1. The unimolecular dissociation of 1 following collisional electron transfer is promoted by large Franck-Condon effects that result in 8090 kJ mol(-1) vibrational excitation in the radicals. Radicals 1 are calculated to exoergically abstract hydrogen atoms from acetamide in water, but not in the gas phase. The different reactivity is due to solvent effects that favor the products, (.)CH(2)CONH(2) and CH(3)CH(OH)NH(2), over the reactants.     

Robust self-assembled octadecylphosphonic acid monolayers on a mica substrate

As determined by scratch tests, self-assembled monolayers (SAMs) of octadecylphosphonic acid (OPA) on a muscovite mica substrate were found to be mechanically robust and to serve as a lubricant to protect the underlying mica substrate. For comparison purposes, three polymer films were subjected to scratch tests under the same conditions. The scratch tests were conducted using a diamond-tipped stylus, and the resultant scratches were examined using atomic force microscopy. The excellent mechanical strength of OPA SAMs is supported by analysis with time-of-flight secondary ion mass spectrometry, which suggests that the headgroup of the OPA is strongly bonded to the substrate atoms. The molecular lubrication provided by OPA SAMs suggests that the interaction between the headgroup and the substrate is sufficiently strong to endure significant shear force and that the hydrocarbon chains are able to dissipate shear energy.