The synthesis of some 4,4′-disubstituted-2,2′-biquinolines

2,2′-Biquinoline dioxide and 4,4′-dichloro-2,2′-biquinoline have been used for the preparation of the following 4,4′-disubstituted-2,2′-biquinolines: dimethoxy, diethoxy, dihydroxy, dipiperidino, dipyrrolidino, dibromo, diphenoxy, dithiophenoxy, di(p-chloro-phenoxy), di(p-bromophenoxy), di(p-fluorophenoxy), di(β-naphthoxy) and the dinitro dioxide. Molar extinction coefficients have been determined for several of the copper (I) complexes of these compounds.     

Characterization of the new Bi∼6.2Cu∼6.2O8(PO4)5 oxyphosphate; a disordered compound containing 2- and 3-O(Bi, Cu)4 tetrahedra—wide polycationic ribbons

The present work is dedicated to the XRD, ED and HREM characterization of a new bismuth copper oxyphosphate Bi_∼6.2Cu_∼6.2O₈(PO₄)₅ (a=11.599(2)Å, , c=37.541(5)Å, R₁=0.0755, Rw₂₌0.174, G.S Pn2₁a). The relatively long size of its c parameter is due to the arrangement along this direction of two kinds of ribbon-like polycations formed by edge sharing O(Bi, Cu)₄ tetrahedra. The existence of such cations is characterized by the b∼5.2 Å value intrinsic to the ribbons structure and commonly found in bismuth oxyphosphate materials. In the title compound, 2-tetrahedra wide [Bi_∼2.4Cu_∼3.6O₄]^6.4+ and 3-tetrahedra wide [Bi_∼5Cu_∼3O₆]⁹⁺ ribbons are isolated by phosphate groups and alternate along c. The interstitial site created between two different sizes ribbons is occupied by Cu²⁺ cations disordered over several close crystallographic sites. The mixed Bi³⁺/Cu²⁺ nature of certain edge-of-ribbons positions induces a disorder over several configurations of the phosphate groups. The concerned oxygen atoms form the environment of the disordered interstitial Cu²⁺ cations which occupy tunnels formed by the phosphate anions. The high-resolution electron microscope study enables a precise correlation between the observed images and the refined crystal structure, evidencing the polycations visualization. Furthermore, this material being the second example of partially disordered compound similar chemical system, some topological rules can be deduced. The b-axis doubling was observed by ED and HREM and is assigned to the ordering of interstitial Cu²⁺ within tunnels cations. A partial intra-tunnel ordering was also observed.     

Radiation synthesis of superabsorbent poly(acrylic acid)–carrageenan hydrogels

A series of superabsorbent hydrogels were prepared from carrageenan and partially neutralized acrylic acid by gamma irradiation at room temperature. The gel fraction, swelling kinetics and the equilibrium degree of swelling (EDS) of the hydrogels were studied. It was found that the incorporation of even 1% carrageenan (sodium salt) increases the EDS of the hydrogels from 320 to 800 g/g. Thermal analysis were carried out to determine the amount of free water and bound water in the hydrogels. Under optimum conditions, poly(acrylic acid)–carrageenan hydrogels with high gel fraction (80%) and very high EDS (800 g/g) were prepared gamma radiolytically from aqueous solution containing 15% partially neutralized acrylic acid and 1–5% carrageenan. The hydrogels were also found to be sensitive to the pH and the ionic strength of the medium.     

Effect of axial ligation or pi-pi-type interactions on photochemical charge stabilization in "two-point" bound supramolecular porphyrin-fullerene conjugates

Two types of structurally well-defined, self-assembled zinc porphyrin-fullerene conjugates were formed by "two-point" binding strategies to probe the effect of axial ligation or pi-pi-type interactions on the photochemical charge stabilization in the supramolecular dyads. To achieve this, meso-tetraphenylporphyrin was functionalized to possess one or four [18]crown-6 moieties at different locations on the porphyrin macrocycle while fullerene was functionalized to possess an alkyl ammonium cation, and a pyridine or phenyl entities. As a result of the crown ether-ammonium cation complexation, and zinc-pyridine coordination or pi-pi-type interactions, stable zinc porphyrin-fullerene conjugates with defined distance and orientation were formed. Evidence for the zinc-pyridine complexation or pi-pi-type interactions was obtained from the spectral and computational studies. Steady-state and time-resolved emission studies revealed efficient quenching of the zinc-porphyrin singlet excited state in these dyads, and the measured rates of charge separation, k(CS) were found to be slightly better in the case of the dyads held by axial coordination and crown ether-cation complexation. Nanosecond transient absorption studies provided evidence for the electron transfer reactions, and these studies also revealed charge stabilization in these dyads. The lifetimes of the radical ion pairs were found to depend upon the type of porphyrins utilized to form the dyads, that is, porphyrin possessing the crown ether moiety at the ortho position of one of the phenyl rings yielded prolonged charge stabilized states. Addition of pyridine to the supramolecular dyads eliminated the zinc-pyridine coordination or pi-pi-type interactions of the "two-point" bound systems due to the formation of a new zinc-pyridine axial bond thus giving a unique opportunity to probe the effect of axial coordination or pi-pi interactions on k(CS) and k(CR). Under these conditions, the measured electron transfer rates revealed faster k(CS) and slower k(CR) as compared to those obtained in the absence of added pyridine. The evaluated lifetimes of the radical ion-pairs were found to be hundreds of nanoseconds and were longer in the presence of pyridine.     

Determination of selected neurotransmitter metabolites using monolithic column chromatography coupled with chemiluminescence detection

The oxidation of selected clinically important neurotransmitter metabolites with acidic potassium permanganate in the presence of polyphosphates evokes chemiluminescence of sufficient intensity to enable the sensitive determination of these species. Limits of detection for 5-hydroxyindole-3-acetic acid (5-HIAA), vanilmandelic acid (VMA; α,4-dihydroxy-3-methoxybenzeneacetic acid), 4-hydroxy-3-methoxyphenylglycol (MHPG), homovanillic acid (HVA, 4-hydroxy-3-methoxyphenylacetic acid) and 3,4-dihydroxyphenylacetic acid (DOPAC) were between 5 × 10⁻⁹ and 4 × 10⁻⁸ M, using flow-injection analysis methodology. In addition, we demonstrate the rapid determination of homovanillic acid and 5-hydroxyindole-3-acetic acid in human urine - without the need for extraction procedures - using monolithic column chromatography with chemiluminescence detection.     

Efficiency in integral facility design problems

An example of design might be a warehouse floor (represented by a setS) of areaA, with unspecified shape. Givenm warehouse users, we suppose that useri has a known disutility functionf _isuch thatH _i(S), the integral off _iover the setS (for example, total travel distance), defines the disutility of the designS to useri. For the vectorH(S) with entriesH _i(S), we study the vector minimization problem over the set {H(S) :S a design} and call a design efficient if and only if it solves this problem. Assuming a mild regularity condition, we give necessary and sufficient conditions for a design to be efficient, as well as verifiable conditions for the regularity condition to hold. For the case wheref _iis thel _p-distance from warehouse docki, with 1<p<, a design is efficient if and only if it is essentially the same as a contour set of some Steiner-Weber functionf =₁ f ₁++ _m f _m ,when the _i are nonnegative constants, not all zero.This research was supported in part by the Interuniversity College for PhD Studies in Management Sciences (CIM), Brussels, Belgium; by the Army Research Office, Triangle Park, North Carolina; by a National Academy of Sciences-National Research Council Postdoctorate Associateship; and by the Operations Research Division, National Bureau of Standards, Washington, D.C. The authors would like to thank R. E. Wendell for calling Ref. 16 to their attention.     

Synthesis of PI3K inhibitor GDC-0077 via a stereocontrolled N-arylation of α-amino acids

An efficient synthesis of PI3K inhibitor GDC-0077, featuring two consecutive Cu-catalyzed CN coupling reactions, is reported. The described synthetic route involves a chemoselective Ullmann-type coupling of a chiral difluoromethyl-substituted oxazolidinone, a Cu-catalyzed N-arylation of l-alanine with high stereochemical integrity, and a high-yielding final amide bond formation step to produce GDC-0077 in >99.5 area % HPLC purity.     

THE EXCITATION OF 8-METHOXYPSORALEN WITH VISIBLE LIGHT: REVERSED PHASE HPLC QUANTITATION OF MONOADDUCTS and CROSS-LINKS

Abstract— The formation of 8-methoxypsoralen-DNA monoadducts and cross-links is presumed to be responsible for the efficacy of photochemotherapies that employ 8-methoxypsoralen activated with long-wavelength ultraviolet radiation (UVA,320–400 nm). In this report it is shown that 8-methoxypsoralen can also be activated with visible light (419 nm). Bovine aorta smooth muscle cells were treated with 8-methoxypsoralen (1000 ng/mL) and 419 nm light (up to 12 J/cm²). Cellular DNA was isolated, hydrolyzed using nucleolytic enzymes and then analyzed by reversed-phase high-performance liquid chromatography. The primary effect of using visible light instead of long-wavelength ultraviolet radiation is a more than 10-fold reduction in the extent of cross-link formation. Because the extent of monoadduct and cross-link formation has not been routinely measured in experiments in which cellular assays have been performed, it is difficult to correlate cell response to the presence of a particular type of 8-methoxypsoralen photoadduct (monoadduct or cross-link). Thus, the use of visible light allows the study of cells containing nearly 100% monoadducts. In addition, the reduction in cross-link formation when visible light is used to activate the compound may also reduce the mutagenicity of 8-methoxypsoralen and hence enhance its therapeutic efficacy.     

New heterodimetallic cyclopentadienyl carbonyl complexes: crystal structure of (C5Me4Et)(μ-CO)3Ru(C5Me5)

A series of heterodimetallic complexes of general formula (C₅R₅)M(μ-CO)₃RuC₅Me₅ (M = Cr, Mo, W; R = Me, Et) has been prepared in good yields by the reaction of [C₅R₅M(CO)₃]⁻ with [C₅Me₅Ru(CH₃CN)₃]⁺. (C₅Me₄Et)W(μ-CO)₃Ru(C₅Me₅) was characterized by a crystal structure determination. The W---Ru bond length of 2.41 Å is consistent with the formulation of a metal-metal triple bond, while the unsymmetrical bonding mode of the three bridging carbonyl groups reflects the inherent non-equivalence of the two different C₅R₅M-units. Using [CpRu(CH₃CN)₃]⁺ or [CpRu(CO)₂(CH₃CN)]⁺ as the cationic precursor leads to the formation of dimetallic species (C₅R₅)M(CO)₅RuC₅H₅ with both bridging and terminal carbonyl groups.     

Diglycidyl ether of bisphenol-A epoxy resin–polyether sulfone/polyether sulfone ether ketone blends: phase morphology, fracture toughness and thermo-mechanical properties

The properties of diglycidyl ether of bisphenol-A epoxy resin toughened with poly(ether sulfone ether ketone) (PESEK) and poly(ether sulfone) (PES) polymers were investigated. PESEK was synthesised by the nucleophilic substitution reaction of 4,4’-difluorobenzophenone with dihydroxydiphenylsulfone using sulfolane as solvent and potassium carbonate as catalyst at 230 °C. The T _g–composition behaviour of the homogeneous epoxy resin/PESEK blend was modelled using Fox, Gordon–Taylor and Kelley–Bueche equations. A single relaxation near the glass transition of epoxy resin was observed in all the blend systems. From dynamic mechanical analysis, the crosslink density of the blends was found to decrease with increase in the thermoplastic concentration. The storage modulus of the epoxy/PESEK blends was lower than that of neat resin, whilst it is higher for epoxy/PES blends up to glass transition temperature, thereafter it decreases. Scanning electron microscopic studies of the blends revealed a homogeneous morphology. The homogeneity of the blends was attributed to the similarity in chemical structure of the modifier and the cured epoxy network and due to the H-bonding interactions between the blend components. The fracture toughness of epoxy resin increased on blending with PESEK and PES. The increase in fracture toughness was due to the increase in ductility of the matrix. The thermal stability of the blends was comparable to that of neat epoxy resin.