Structural identification of isomers present in technical perfluorooctane sulfonate by tandem mass spectrometry

The structures of isomeric by-products of technical perfluorooctane sulfonate (PFOS, C8F17SO3-) were characterized by high-performance liquid chromatography coupled to mass spectrometry. Ion trap (IT) as well as triple quadrupole (TQ) tandem mass spectrometry (MS/MS) identified ten PFOS isomers with best results being achieved by ion trap MS/MS. In addition to the linear isomer, the main by-products were isomers with geminal diperfluoromethyl groups and perfluoromethyl-substituted compounds. Purified fractions of the perfluoromethyl isomers allowed the elucidation of structures and the assignment of the retention times of perfluoroisopropyl-, 5-perfluoromethyl-, 4-perfluoromethyl-, 3-perfluoromethyl- and 1-perfluoromethyl-PFOS. The concentration of 2-perfluoromethyl-PFOS was too low in technical PFOS for a proper identification. Retention times of the geminal substituted diperfluoromethyl isomers could not be properly assigned due to co-elutions. The number and position of the CF3 groups can be derived from the MS/MS spectra, which allow an unequivocal identification of the isomers. TQ-MS/MS also allowed us to identify most of the isomers.     

Ab initio study of a Bi3+ impurity in Cs2NaYCl6 and Y2O3: comparison of perturbative and variational electron correlation methods

Ab initio study of excitation energies and oscillator strengths for absorption towards the (3)P(1) and (1)P(1) states of the Bi(3+) ion has been performed for the Bi(3+) ion in gas phase and as a dopant of the cubic elpasolite Cs(2)NaYCl(6) and the yttria Y(2)O(3) crystal using the ab initio embedded-cluster method. The ground and excited states were computed with a relativistic spin-orbit configuration interaction approach suited for heavy elements. Electron correlation was treated in the scalar relativistic scheme with perturbative, variational, and coupled-cluster methods. Intermediate coupling is included via an effective-Hamiltonian based spin-orbit configuration interaction approach. Small-core (60 electrons) and large-core (78 electrons) relativistic effective core potentials (ECPs) have been used to describe the bismuth ion. The best match with experiment was obtained with the small-core ECP. The accuracy of excitation energies strongly depends on the electron correlation method used. The agreement between experimental data and the results obtained using second-order multiconfigurational perturbation theory is greatly improved with the shifted zeroth-order Hamiltonian proposed by Ghido et al. [Chem. Phys. Lett. 396, 142 (2004)]. Although quite time consuming, coupled-cluster and variational methods yield good agreement with experimental data. The first absorption band recorded for the doped elpasolite crystal is positioned with an excellent accuracy while the computed energy of the second absorbing manifold is in poorer agreement with experimental data. This suggests that interactions with neglected close-lying excited states with a ligand-to-metal charge transfer character may be significant. Calculations of the spectrum of Bi(3+) doping yttria in both the S(6) and C(2) site symmetries indicate that the absorbing manifold arises from electronic excitations localized on the Bi(3+) doping ion with main triplet 6s6p character. Our results predict the first absorbing peak to lie about 0.5 eV lower for the S(6) sites than for the C(2) site, thus attributing the violet and the green emission wavelengths to the S(6) and C(2) sites, respectively. A subsequent study of Stokes shift and emission wavelength should hopefully lead to a final assignment of the measured excitation spectra.     

Cryopreservation of cultivated and wild potato varieties by droplet vitrification: effect of subculture of mother-plants and of preculture of shoot tips

In this paper, we studied the effect of subculture of mother-plants and of preculture of shoot tips of two potato varieties (Dejima, cultivated and STN13, wild) cryopreserved using the droplet-vitrification technique. The subculture conditions (light intensity, aeration and planting density) significantly affected survival of both non-cryopreserved and cryopreserved shoot-tips in both varieties. The subculture duration and the position of the shoot tips on the axis of the in vitro plantlets had a significant (P<0.0001) effect on survival of cryopreserved shoot tips. The optimal subculture duration was 7 and 5 weeks and the optimal size of shoot tips was 1.5-2.0 and 1.0-1.5 mm for var. Dejima and STN13, respectively. Survival of cryopreserved shoot tips was influenced by the sucrose concentration in the preculture medium and the preculture duration. The highest survival of cryopreserved shoot tips was observed after preculture with 0.3 M sucrose for 8 h followed by 0.7 M sucrose for 18 h. These results indicate that the parameters of the subculture of mother-plants and of preculture of shoot tips should be carefully optimized, especially in the case of wild species.     

Cryopreservation of garlic bulbil primordia by the droplet-vitrification procedure

The droplet-vitrification protocol, a combination of droplet-freezing and solution-based vitrification was applied for cryopreserving garlic bulbil primordia. The highest survival and regeneration percentages of cryopreserved primordia (90.1 to 95.0 percent and 82.7 to 85.0 percent, respectively) were achieved after preculture for 2-4 days at 10 degree C on solid medium with 0.1 - 0.3 M sucrose, loading for 50 minutes in liquid medium with 2 M glycerol + 0.5 M sucrose, dehydration with PVS3 vitrification solution for 90-150 min, cooling primordia in 5 microl droplets of PVS3 vitrification solution placed on aluminum foil strips by dipping these strips in liquid nitrogen, warming them by plunging the foil strips into pre-heated (40 degree C) 0.8 M sucrose solution for 30 s and further incubation in the same solution for 30 minutes. The optimized droplet-vitrification protocol was successfully applied to bulbil primordia of five garlic varieties originating from various countries and to immature bulbils of two vegetatively propagated Allium species, with regeneration percentages ranging between 77.4 - 95.4 percent.     

Preparation of Clickable Poly(3‐hydroxyalkanoate) (PHA): Application to Poly(ethylene glycol) (PEG) Graft Copolymers Synthesis

A new synthesis of amphiphilic biodegradable copolymers consisting of hydrophobic poly(3‐hydroxyalkanoate) (PHA) backbone and hydrophilic poly(ethylene glycol) (PEG) units as side chains is described. Poly[(3‐hydroxyoctanoate)‐co‐(3‐hydroxyundecenoate)] (PHOU) was first methanolyzed and its unsaturated side chains were quantitatively oxidized to carboxylic acid. Esterification with propargyl alcohol led to an alkyne‐containing “clickable” PHA in 71% conversion. Its reactivity was successfully demonstrated by grafting azide‐terminated PEG chains of 550 and 5 000 g · mol⁻¹, respectively. All products were fully characterized using GPC, ¹H, and COSY NMR.

     

N-tosylcarboxamide as a transformable directing group for Pd-catalyzed C-H ortho-arylation

The N-tosylcarboxamide group offers the possibility of directing the Pd-catalyzed C-H arylation of arenes providing a new entry to biarylcarboxamides. Moreover, its ability to react according to different reaction conditions including intramolecular reactions makes it a pivotal directing group for a divergent synthesis of biaryl-based compounds.     

Cyto-mechanoresponsive polyelectrolyte multilayer films

Cell adhesion processes take place through mechanotransduction mechanisms where stretching of proteins results in biological responses. In this work, we present the first cyto-mechanoresponsive surface that mimics such behavior by becoming cell-adhesive through exhibition of arginine-glycine-aspartic acid (RGD) adhesion peptides under stretching. This mechanoresponsive surface is based on polyelectrolyte multilayer films built on a silicone sheet and where RGD-grafted polyelectrolytes are embedded under antifouling phosphorylcholine-grafted polyelectrolytes. The stretching of this film induces an increase in fibroblast cell viability and adhesion.     

Study of Nanocrystalline BiMnO3‐‐PbTiO3: Synthesis,Structural Elucidation,and Magnetic Characterization of the Whole Solid Solution

In the last ten years, the study and the search for new multiferroic materials have been a major challenge due to their potential applications in electronic technology. In this way, bismuth‐containing perovskites (BiMO₃), and particularly those in which the metal M position is occupied by a magnetically active cation, have been extensively investigated as possible multiferroic materials. From the point of view of synthesis, only a few of the possible bismuth‐containing perovskites can be prepared by conventional methods but at high pressures. Herein, the preparation of one of these potential multiferroic systems, the solid solution xBiMnO₃‐(1?x)PbTiO₃ by mechanosynthesis is reported. Note that this synthetic method allows the oxides with high x values, and more particularly the BiMnO₃ phase, to be obtained as nanocrystalline phases, in a single step and at room temperature without the application of external pressure. These results confirm that, in the case of Bi perovskites, mechanosynthesis is a good alternative to high‐pressure synthesis. These materials have been studied from the point of view of their structural characteristics by precession electron diffraction and magnetic property measurements.     

A Super-Wide Bore DNP System for Multiple Sample Polarization: Cryogenic Performance and Polarization at Low Temperature

The volume of polarized sample and the delay required between successive polarizations of samples represent serious constraints for dynamic nuclear polarization (DNP) applications. With these limitations in mind, a DNP polarizer, based on a super-wide bore (150-mm diameter) vertical magnet operating at 3.35?T, was designed. The working diameter for loading/unloading samples is equal to 46?mm and the microwave cavity can accommodate up to three samples. The cryostat can be cooled to 4.2?K in typically 2?h and filled with liquid helium in 1?h. Once filled with liquid helium, the cryostat hold time is on the order of 4?h and a minimum temperature of 1.19?K can be reached. In situ polarization levels at low temperature were measured between 5 and 10?% in single and multiple samples of ¹³C-labeled urea and glycine.     

An ab initio molecular dynamics study of ionic conductivity in hexagonal lithium lanthanum titanate oxide La0.5Li0.5TiO3

To date, the fastest lithium ion-conducting solid electrolytes known are the perovskite-type ABO₃ oxide, with A = Li, La and B = Ti, lithium lanthanum titanate (LLTO) Li_3x La_{( 2 \mathord}