Mathematical Modeling of Magnetohydrodynamic Processes in an Aluminum Electrolyzer

We model the electrolysis of aluminum in specific electrolysis baths. A model of the physical process is proposed, allowing for the specific bath design, including the state of the bottom surface. The mathematical model utilizes the information capabilities of the Navier–Stokes equations written for the metal and the electrolyte media. The multidimensional system of equations enables us to consider the magnetohydrodynamic processes in two media and the interaction of the media. The problem is solved numerically. The calculations simulate the interface dynamics and the distribution of velocities and currents in the middle layer in both media. The numerical results are compared with physical experiments.     

Simulation of Convective Flow of an Electrically Conducting Fluid in a Cavity

A new quasi-hydrodynamic algorithm is proposed for numerical analysis of convective flows in the presence of a homogeneous external magnetic field. The Marangoni convection problem in a square cross-section cavity is solved.     

On the computation of scaling coefficients of Daubechies' wavelets

In the present paper, Daubechies' wavelets and the computation of their scaling coefficients are briefly reviewed. Then a new method of computation is proposed. This method is based on the work [7] concerning a new orthonormality condition and relations among scaling moments, respectively. For filter lengths up to 16, the arising system can be explicitly solved with algebraic methods like Gröbner bases. Its simple structure allows one to find quickly all possible solutions.     

Heuristic Rejection in Interval Global Optimization

Based on the investigation carried out in Ref. 1, this paper incorporates new studies about the properties of inclusion functions on subintervals while a branch-and-bound algorithm is solving global optimization problems. It is found that the relative place of the global minimum value within the inclusion function value of the objective function at the current interval indicates mostly whether the given interval is close to a minimizer point. This information is used in a heuristic interval rejection rule that can save a considerable amount of computation. Illustrative examples are discussed and an extended numerical study shows the advantages of the new approach.     

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

Luminescence enhancement by hydrogenation of Si:Er,O

Erbium (Er)- and oxygen (O)-doped Cz–Si was additionally doped with hydrogen, using plasma enhanced chemical vapour deposition. Photoluminescence (PL) spectra show a large enhancement especially for samples treated with solid phase epitaxy before hydrogenation and annealing at 900°C later. Secondary ion mass spectroscopy measurements give evidence for an enhanced diffusion of O and Er at this temperature towards the surface. Etching shows that the PL does not stem from the heavily doped surface layer but from a deeper region with lower Er concentration. This conclusion is supported by the appearance of the so-called “cubic” centre with low solubility. Comparing the PL yield of the hydrogenated samples to that of samples with similar Er volume concentration but without hydrogenation still gives a large enhancement. We thus conclude that hydrogen can enhance the solubility of the cubic centre in Si:Er,O.