Synthesis, characterization, and reactivity of half-sandwich Ru(II) complexes containing phosphine, arsine, stibine, and bismutine ligands

The synthesis and some reactions of the Ru(II) and Ru(IV) half-sandwich complexes [RuCp(EPh₃)(CH₃CN)₂]⁺ (E=P, As, Sb, Bi) and [RuCp(EPh₃)(η³-C₃H₅)Br]⁺ have been investigated. The chemistry of this class of compounds is characterized by a competitive coordination of EPh₃ either via a RuE or a η⁶-arene bond, where the latter is favored when the former is weaker, that is in going down the series. Thus in the case of Bi, the starting material [RuCp(CH₃CN)₃]⁺ does not react with BiPh₃ to give [RuCp(BiPh₃)(CH₃CN)₂]⁺ but instead gives only the η⁶-arene species [RuCp(η⁶-PhBiPh₂)]⁺ and [(RuCp)₂(μ-η⁶,η⁶-Ph₂BiPh)]²⁺. Similarly, the EPh₃ ligand can be replaced by an aromatic solvent or an arene substrate. Thus, the catalytic performance of [RuCp(EPh₃)(CH₃CN)₂]⁺ for the isomerization of allyl-phenyl ethers to the corresponding 1-propenyl ethers is best with E=P, while the conversion drops significantly using the As and Sb derivatives. By the same token, only [RuCp(PPh₃)(CH₃CN)₂]⁺ is stable in a non-aromatic solvent, whereas both [RuCp(AsPh₃)(CH₃CN)₂]⁺ and [RuCp(SbPh₃)(CH₃CN)₂]⁺ rearrange upon warming to [RuCp(η⁶-PhEPh₂)]⁺ and related compounds. In addition, the potential of [RuCp(EPh₃)(CH₃CN)₂]⁺ as precatalysts for the transfer hydrogenation of acetophenone and cyclohexanone has been investigated. Again aromatic substrates are clearly less suited than non-aromatic ones due to facile η⁶-arene coordination leading to catalyst's deactivation.     

Synthesis and characterisation of a series of alkylmagnesium amide and related oxygen-contaminated "alkoxy" compounds

Synthesised either by an unusual tert-butyl metathesis between tert-butyllithium and a n,s-butylmagnesium amide or by reaction of an alkyl Grignard reagent and a sodium amide, five tert-butylmagnesium amides, Bu(t)MgDBA (5)(DBA=dibenzylamide), Bu(t)MgDA (6)(DA=diisopropylamide), Bu(t)MgHMDS (7)(HMDS=1,1,1,3,3,3-hexamethyldisilazide), Bu(t)MgTMP (8)(TMP=2,2,6,6-tetramethylpiperidide) and Bu(t)MgNCy2 (9)(cy=cyclohexyl) have been isolated as crystalline solids. All five amides have been characterised by X-ray crystallography and solution NMR spectroscopic studies. The former studies reveal a common dimeric molecular structure with amido bridges in a planar (MgN)2 ring and terminal Bu(t) ligands on the Mg atoms. Also described is the dodecameric primary amide [Bu(n)MgN(H)Dipp]12 (10a) and its monomeric solvate Bu(n)MgN(H)Dipp.TMEDA (10b)(Dipp=2,6-diisopropylphenyl; TMEDA=N,N,N',N'-tetramethylethylenediamine). The crystal structures of the oxo-insertion products Bu(t)MgOBu(t).THF (11), Bu(t)Mg(mu-OBu(t))(mu-TMP)MgTMP (12) and Mg(OBu(n))HMDS.solv [solv=THF (13a) or Et2O (13b)], made fortuitously during the course of this work, are also presented.     

Effects of partial/asymmetrical filling of micelles and chiral selectors on capillary electrophoresis enantiomeric separation: generation of a gradient

The effect of several experimental parameters on enantiomeric separations in micellar capillary electrophoresis (MCE) was studied. A model separation system was tested. It was composed of an acidic phosphate buffer with sodium dodecyl sulfate (SDS) and hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as the chiral selector. A substituted angelicin was used as a chiral analyte. Changes in the concentration of SDS micelles/SDS monomers in the presence of HP-beta-CD and their impact on the enantioselective separation were investigated. Variation of the composition of electrolytes in the individual compartments of the separation system (inlet vial, capillary, and outlet vial) affected both the migration times and the resolution of the enantiomers. Current vs. time dependencies also were monitored during the separations. A mathematical model of electromigration in micellar systems with chiral selector present was proposed and a computer simulation was used to explain the observed phenomena and to confirm the generation of a CD/SDS-micelle concentration gradient under certain experimental conditions. This is the reported first attempt of a computer simulation of the complex, dynamic chiral environment of the CD-SDS-MCE system.     

1,8-Naphthyridines. Part III. Synthesis of some 6-substituted-1,8-naphthyridin-2(1H)ones

The syntheses of some 1,8-naphthyridines substituted in the 6-position with heterocyclic groups are described. A synthetic route to 6-amino-5,7-dimethyl-1,8-naphthyridin-2(1H)one is also presented.     

ICP-MS determination of heavy metals in submerged cultures of wood-rotting fungi

Accumulation of five heavy metal ions by five species of wood-rotting basidiomycetes during a 9-day cultivation was studied. Contents of Cd, Cu, Pb, and Zn were measured using ICP-MS; the amount of mercury was determined directly in solid samples using the Advanced Mercury Analyser. A standard operation procedure for the sample preparation and determination of metal content was developed and validated. Presence of Cd, Cu, Hg, and Pb decreased the accumulation of zinc by the fungi. The basidiomycete Pycnoporus cinnabarinus exhibited the highest metal binding capacity of all fungi tested.     

Saturated heterocycles, 162 [1]. synthesis and steric structures of 3,4-disubstituted 1,6,7,11b-tetrahydropyrimido[6,1-a]isoquinolin-2-ones

The reaction of 1-(hydrazidomethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline 3 with aromatic aldehydes yield hydrazones 4a,b or pyrimido[6,1-a]isoquinolines 5a-c depending upon the proportions of the reagents. With ketones, 3 gives only hydrazones 4a-d and 7 , which can be transformed to pyrimidoisoquinolines 10a-e and 11 with aldehydes. The ring closures are stereospecific; the relative configurations were determined by DNOE measurements.     

Estimation of the absolute internal-rotation entropy of molecules with two torsional degrees of freedom from stochastic simulations

A method of statistical estimation is applied to the problem of evaluating the absolute entropy of internal rotation in a molecule with two torsional degrees of freedom. The configurational part of the entropy is obtained as that of the joint probability density of an arbitrary form represented by a two-dimensional Fourier series, the coefficients of which are statistically estimated using a sample of the torsional angles of the molecule obtained by a stochastic simulation. The internal rotors in the molecule are assumed to be attached to a common frame, and their reduced moments of inertia are initially calculated as functions of the two torsional angles, but averaged over all the remaining internal degrees of freedom using the stochastic-simulation sample of the atomic configurations of the molecule. The torsional-angle dependence of the reduced moments of inertia can be also averaged out, and the absolute internal-rotation entropy of the molecule is obtained in a good approximation as the sum of the configurational entropy and a kinetic contribution fully determined by the averaged reduced moments of inertia. The method is illustrated using Monte Carlo simulations of isomers of stilbene and halogenated derivatives of propane. The two torsional angles in cis-stilbene are found to be much more strongly correlated than those in trans-stilbene, while the degree of the angular correlation in propane increases strongly on substitution of hydrogen atoms with chlorine.     

Fluorescent behavior of B-phycoerythrin in microemulsions of aerosol OT/water/isooctane

Taking advantage of its unusual fluorescent properties, the incorporation of B-phycoerythrin (B-PE) in aerosol OT (AOT, sodium bis-(2-ethylhexyl) sulphosuccinate)/water/isooctane microemulsions was investigated by following their steady-state and time-resolved fluorescence as a function of the water-to-surfactant molar ratio, w(0). The fluorescent intensity at 575 nm increased continuously with increasing water content, saturating at a w(0) around 35 and staying practically constant at w(0)> or =40. The steady-state anisotropy showed an initial increase with increasing water content until w(0)=23 and then decreased strongly, staying practically constant when w(0)> or =40. The values of the fluorescent parameters, anisotropy and fluorescent intensity, were unchanged when the water content of the system increased in the range between w(0)=40 to 50. This implies the effective incorporation of B-PE in the microemulsion droplets with w(0)> or =40, as well as the equilibrium of the dispersion at these water/surfactant ratios, since higher water content does not affect the main surrounding microenvironment of the protein. The overall incorporation in the microemulsion droplets caused minor spectroscopic changes with respect to biliprotein in aqueous solution of 20 mM sodium phosphate buffer, pH 7.0, such as a blue absorption shift of 3 nm and an emission shift of 1.5 nm, as well as a slight increase in excitation anisotropy spectrum mainly caused by a decrease in protein mobility. Therefore, there are no important interactions between the chromophores and the AOT sulfonate head groups. Emission intensity decays followed complex kinetics in both aqueous and dispersion media. The stability with time and temperature of the biliprotein in the microemulsion was higher than in the aqueous solution. All the results can be explained in terms of B-PE inclusion in the water droplets of AOT microemulsions where the protein has similar configuration and conformation to that in aqueous solution but with the chromophores more protected.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.