Simplified procedures for the analysis of polycyclic aromatic hydrocarbons in water, sediments and mussels

We describe in this paper simple and robust analytical protocols to determine the 16 polycyclic aromatic hydrocarbons (PAHs) of the US Environmental Protection Agency priority list in water, sediment and mussels. For water samples, eight different solid-phase extraction (SPE) sorbents have been compared and among them, C18 provided highest recoveries and limits of detection of 0.3-15 ng/L. For lyophilized sediments, Soxhlet and ultrasonic extraction were compared, and the last one permitted to recover all analytes with highest repetitivity and was validated by analysing a certified reference material. Finally, the analysis of mussels was undertaken using Soxhlet, ultrasonic and pressurized liquid extraction (PLE) and the performance of several clean-up steps are compared. Whereas for the former two, incomplete recovery or losses of some analytes were evidenced, PLE permitted a more efficient extraction and although alkaline digestion was necessary to remove coextracted compounds, the method gave acceptable recoveries and limits of detection of 0.5-7.7 microg/kg dry mass, as for sediments. In all cases, analysis was performed by gas chromatography coupled to mass spectrometry and internal standard quantification was performed using five deuterated PAHs. Each method performance is discussed for the three matrices analysed and the paper reports advantages and disadvantages of each for their routine application in monitoring programs.     

Application of an artificial neural network (ANN) and piezoelectric chemical sensor array for identification of volatile organic compounds

A piezoelectric chemical sensor array was developed using four quartz crystals. Gas chromatographic stationary phases were used as sensing materials and the array was connected to an artificial neural network (ANN). The application of the ANN method proved to be particularly advantageous if the measured property (mass, concentration, etc.) should not be connected exactly to the signal of the transducers of the piezoelectric sensor. The optimum structure of neural network was determined by a trial and error method. Different structures were tried with several neurons in the hidden layer and the total error was calculated. The optimum values of primary weight factors, learning rate (η=0.15), momentum term (μ=0.9), and the sigmoid parameter (β=1) were determined. Finally, three hidden neurons and 900 training cycles were applied. After the teaching process the network was used for identification of taught analytes (acetone, benzene, chloroform, pentane). Mixtures of organic compounds were also analysed and the ANN method proved to be a reliable way of differentiating the sensing materials and identifying the volatile compounds.     

Application of matrix solid-phase dispersion to the determination of a new generation of fungicides in fruits and vegetables

A method based on matrix solid-phase dispersion (MSPD) and gas chromatography to determine eight fungicides in fruits and vegetables is described. Fungicide residues were identified and quantified using nitrogen-phosphorus detection and electron-capture detection connected in parallel and confirmed by mass spectrometric detection. The method required 0.5 g of sample, C18 bonded silica as dispersant sorbent, silica as clean-up sorbent and ethyl acetate as eluting solvent. Recoveries from spiked orange, apple, tomato, artichoke, carrot and courgette samples ranged from 62 to 102% and relative standard deviations were less than 15% in the concentration range 0.05-10 mg kg(-1). Detection and quantitation limits ranged 3-30 microg kg(-1) and 10-100 microg kg(-1), respectively, with linear calibration curves up to 10 mg kg(-1). The analytical characteristics of MSPD compared very favourably with the results of a classical multiresidue method, which uses ethyl acetate and anhydrous sodium sulphate for the extraction.     

Influence of spectral and angular sensitivity on the readout of biological dosimeters

Biological systems used as biological dosimeters can possess different angular sensitivities from the detectors usually used in physical devices. A simple experimental setup has been developed and used to measure the angular sensitivity of uracil thin-layer biological dosimeters. Results of angular sensitivity measurements for uracil thin-layer dosimeters are presented using a Xe arc lamp as the UV source. According to the experiments described here, uracil thin-layer dosimeters show a cosine-type angular dependence. In several indoor experiments broadband UV meters are used to control the applied dose rate from a given artificial UV source. The experimental setup has been designed and used to verify experimentally the importance of spectral and angular sensitivity differences of biological and physical UV meters applied in biological experiments. Model calculations for two different irradiation systems, using different geometrical arrangements of artificial UV sources, are also presented. For these arrangements relative dose rates that could be measured with dosimeters of arbitrary spectral, but different angular sensitivity have been calculated.     

Rate constant of unimolecular decomposition of the radical (CH3)2juvyCCH(CH3)2

The energy of activation of CH ₃ ^. radical rupture from the radical (CH₃)₂juvyCCH(CH₃)₂ is 142.2 kJ mol^–1; the selfcombination rate constant is k_c {(CH₃)₂juvyCCH(CH₃)₂}=10^7.3 dm³ mol^–1 s^–1.

---

CH ₃ ^. (CH₃)₂juvyCCH(CH₃)₂ 142,2 /, k_c {(CH₃)₂juvyCCH(CH₃)₂}=10^{7,3 3–1 –1}.

     

Considerations on the modelling and optimisation of resolution of ionisable compounds in extended pH-range columns

The problems associated to the modelling and optimisation of the chromatographic resolution of mixtures involving ionisable solutes at varying pH and acetonitrile content are discussed. Several retention models that separate the contributions of solute, column and stationary phase, were used. The retention was predicted with low errors in large pH domains (2-12), which was an essential requirement to face the optimisation of resolution. The selected mixture was particularly problematic under the viewpoint of resolution, owing to the excessively diverse acid-base behaviour of solutes. This variety led to sudden drops in retention at different pH for each solute, yielding numerous peak crossing, which made finding shared regions of high resolution especially difficult. Conventional resolution diagrams for these situations are scarcely informative, since both the overall and the worst elementary resolutions drop to zero if at least two compounds remain overlapped, even when all the others are baseline resolved. A new chromatographic objective function is proposed to address this drawback. This function, called "limiting peak count", is based on the limiting peak purity concept, and measures the success in the resolution focusing on the resolved solutes, in contrast to conventional resolution assessments that attend mainly to the least resolved solutes. Limiting peak count yields the same result as conventional assessments when full resolution is possible, but it is also able to discriminate the maximal resolving power in low-resolution situations. It offers a different perspective to that given by the complementary mobile phases approach, and the computation is far simpler.     

The complexing ability of crown ethers incorporating glucose

The complexing (in CHCl₃) and extracting abilities of 18-crown-6 type compounds (1–15) were measured with Li, Na, K and NH₄ cations. The substituents on the sugar part affected these properties significantly (K _a=10³–10⁷). Some substituents, like acetyloxy groups (3) decreased whereas others, like tosyloxy groups (10, 11) significantly increased the complexing ability and thus changed the selectivity. The compound with four tosyloxy groups (11) shows an excellent picrate salt extracting ability in a CH₂Cl₂-water system.     

Kinetic titration with differential thermometric determination of the end-point

A method has been described for the determination of concentrations below 10(-4)M by applying catalytic reactions and using thermometric end-point determination. A reference solution, identical with the sample solution except for catalyst, is titrated with catalyst solution until the rates of reaction become the same, as shown by a null deflection on a galvanometer connected via bridge circuits to two opposed thermistors placed in the solutions.     

Reaction of nickel(II) xanthates with amines and carbon monoxide: Formation of thiourethanes and nickel tetracarbonyl

Summary Nickel(II) xanthates react with amines to form nickel(II) dithiocarbamates and thiourethanes, both products of nucleophilic substitution at the sp² carbon atom. If the reaction is conducted under carbon monoxide the nickel and sulphur-containing byproduct of thiourethane formation is transformed partly into Ni(CO)₄.