Generic Transport Aft-body Drag Reduction using Active Flow Control

Active flow-separation control is an effective and efficient mean for drag reduction and unsteady load alleviation resulting from locally or massively separated flow. Such a situation occurs in configurations where the aerodynamic performance is of secondary importance to functionality. The performance of heavy transport helicopters and aeroplanes, having a large, and almost flat, aft loading ramp suffer from the poor aerodynamics of the aft body. Hence, a combined experimental and numerical investigation was undertaken on a generic transport aeroplane/helicopter configuration. The experimental study provided surface pressures, direct drag measurements, surface and smoke flow visualization. The baseline flow was numerically analyzed, using finite volume solutions of the RANS equations. The baseline flow around the model was insensitive to the Reynolds number in the range it was tested. The flow separating from the aft body was characterized by two main sources of drag and unsteadiness. The first is a separation bubble residing at the lower ramp corner and the second is a pair of vortex systems developing and separating from the sides of the ramp. As the model incidence is decreased, the pair of vortex systems also penetrates deeper towards the centerline of the ramp, decreasing the pressure and increasing the drag. As expected, the ramp lower corner bubble was highly receptive to periodic excitation introduced from four addressable piezo-fluidic actuators situated at the ramp lower corner. Total drag was reduced by 3–11%, depending on the model incidence. There are indications that the flow in the wake of the model is also significantly steadier when the bubble at the lower ramp corner is eliminated. The vortex system is tighter and steadier when the ramp-corner bubble is eliminated.     

Comparison of dynamical heterogeneity in hard-sphere and attractive glass formers

Using molecular dynamics simulations, we have determined that the nature of dynamical heterogeneity in jammed liquids is very sensitive to short-ranged attractions. Weakly attractive systems differ little from dense hard-sphere and Lennard-Jones fluids. Particle motion is punctuated and tends to proceed in steps of roughly a single particle diameter. Both of these basic features change in the presence of appreciable short-ranged attractions. Transient periods of particle mobility and immobility cannot be discerned at intermediate attraction strength, for which structural relaxation is greatly enhanced. Strong attractions, known to dramatically inhibit relaxation, restore bimodality of particle motion. But in this regime, transiently mobile particles move in steps that are significantly more biased toward large displacements than those in the case of weak attractions. This modified feature of dynamical heterogeneity, which cannot be captured by conventional mode coupling theory, verifies recent predictions from a model of spatially correlated facilitating defects.     

Nanometer-sized zirconium dioxide microcolumn separation/preconcentration of trace metals and their determination by ICP-OES in environmental and biological samples

A new method is proposed using a microcolumn (20 mm × 2.0 mm) packed with nanometer-sized zirconia as solid-phase extractor for the separation/preconcentration of Mn, Cu, Cr, Zn, Ni and Co prior to their determination by inductively coupled plasma optical emission spectrometer (ICP-OES) in environmental samples. The factors affecting the separation and preconcentration of analytes such as pH, sample flow rate and volume, eluent concentration and volume were determined, interfering ions were studied, and the optimal experimental conditions were established. The adsorption capacity of nanometer-sized ZrO₂ for Mn, Cu, Cr, Zn, Ni and Co was found to be 1.3, 1.3, 1.7, 2.0, 3.9 and 1.5 mg g⁻¹, respectively. The detection limits of the method were 12, 58, 24, 2, 7 and 36 ng L⁻¹, respectively, with a preconcentration factor of 25. The precision of this method was 1.7% (Mn), 2.9% (Cu), 5.9% (Mn), 3.8% (Mn), 6.2% (Mn) and 4.3% (Mn) with 9 determinations of 10 ng mL⁻¹ of target analytes, respectively. The method was successfully applied to the determination of trace metals in lake water, dried fish samples, certified reference materials of human hair and milk, and provided satisfactory results.     

Taming the rugged landscape: production, reordering, and stabilization of selected cluster inherent structures in the X13-nYn system

We present studies of the potential energy landscape of selected binary Lennard-Jones 13 atom clusters. The effect of adding selected impurity atoms to a homogeneous cluster is explored. We analyze the energy landscapes of the studied systems using disconnectivity graphs. The required inherent structures and transition states for the construction of disconnectivity graphs are found by combination of conjugate gradient and eigenvector-following methods. We show that it is possible to controllably induce new structures as well as reorder and stabilize existing structures that are characteristic of higher-lying minima. Moreover, it is shown that the selected structures can have experimentally relevant lifetimes.     

Metathetical reactions of carbonylate anions with dichlororuthenium complexes: Preparation and characterization of ruthenium—molybdenum and ruthenium—manganese complexes

The possibility of making metal—metal bonded heterobimetallic species by metathesis of ruthenium dichlorides with anionic carbonylates is demonstrated by the isolation of MoRu(μ-Cl)(μ-CO)(CO)₂(PPh₃)₂(η-C₅H₅) (1) and MnRuCl(μ-CO)₂(CO)₃(μ-dppm)₂ (2), obtained by action of [Mo(CO)₃(η-C₅H₅]^? on RuCl₂(PPh₃)₃ and of Mn(CO)₅^? on RuCl₂(dppm)₂, respectively. In contrast, reaction of Mn(CO)₅^? with RuCl₂(PMe₃)₄ yielded an ionic species 3 containing the diruthenium cation Ru₂Cl₃(PMe₃)₆⁺. More interestingly, the action of Mn(CO)₅^? on RuCl₂(PPh₃)₃ resulted in the formation of the unexpected complex MnRu(μ-PPh₂)(CO)₆(PPh₃)₂ (4) in which the phosphido group PPh₂ bridges the two metals; this process is shown to involve a hydride intermediate, and elimination of a molecule of benzene, both identified in the reaction mixture.     

A novel homogeneous immunoassay for anthrax detection based on the AlphaLISA method: detection of B. anthracis spores and protective antigen (PA) in complex samples

Amplified Luminescent Proximity Homogeneous Assay (AlphaLISA) technology is an energy-transfer-based assay, utilizing singlet oxygen as an energy donor to a fluorescent acceptor. The long singlet oxygen migration distance allows the energy transfer mechanism to go up to ～200 nm, facilitating flexible and sensitive homogeneous immunoassays. While soluble protein detection using AlphaLISA was previously described, the detection of particles such as bacteria and viruses was not reported. In this work, we show for the first time the implementation of the AlphaLISA technology for the detection of a particulate antigen, i.e., Bacillus anthracis spores. Here, we show that an efficient particle immunoassay requires a high acceptor-to-donor ratio (>4:1). The results suggested that the high acceptor/donor ratio is required to avoid donor aggregation (“islands”) on the spore surface, hence facilitating donor/acceptor interaction. The developed assay enabled the detection of 10⁶ spores/mL spiked in PBS. We also demonstrate the development of a highly sensitive AlphaLISA assay for the detection of the main toxin component of anthrax, protective antigen (PA). The assay enabled the detection of 10 and 100 pg/mL PA in buffer and spiked naïve rabbit sera, respectively, and was successfully implemented in sera of anthrax-infected rabbits. To summarize, this study demonstrates that AlphaLISA enables detection of anthrax spores and toxin, utilizing short homogeneous assays. Moreover, it is shown for the first time that this technology facilitates the detection of particulate entities and might be suitable for the detection of other bacteria or viruses.     

Direct measurement of the spatial Wigner function with area-integrated detection

We demonstrate experimentally a novel technique for characterizing transverse spatial coherence by using the Wigner distribution function. The method is based on the measurement of interference between a pair of rotated and displaced replicas of the input beam with an area-integrating detector, and it provides an optimal signal-to-noise ratio in regimes when array detectors are not available. We analyze the quantum-optical picture of the presented measurement for single-photon signals and discuss possible applications in quantum information processing.