Preparation and characteristics of spinnable sol and continuous mullite fibers with nano silica addition

The spinning precursor sols for the continuous mullite-based fibers were prepared by adding nano-silica to substitute part of silica sol. The effect of SiO₂ nanoparticles on the particle evolution models, polymerization degree and solid content of the sol,and the spinning length and sintering behavior of the fibers was investigated. The results were shown that the addition of nano silica enhanced the polymerization degree and extended the spinnable range of the sol. The appropriate polymerization degree (B value) for this sol system was 1.885–2.145. The grain diameter decreased from 39.6 to 25.9 nm with increasing the nano-silica content to 20 %, and then, it increased to 41.2 nm with increasing the nano-silica content to 100 %. The appropriate content of nano-silica powders would reduce the grain diameter. However, it had no influence on the linear growth model, homogeneity and solid content of the precursor sol.     

Exploring the Limits of Transition-Metal Fluorination at High Pressures

Fluorination is a proven method for challenging the limits of chemistry, both structurally and electronically. Here we explore computationally how pressures below 300 GPa affect the fluorination of several transition metals. A plethora of new structural phases are predicted along with the possibility for synthesizing four unobserved compounds: TcF₇, CdF₃, OsF₈, and IrF₈. The Ir and Os octaflourides are both predicted to be stable as quasi-molecular phases with an unusual cubic ligand coordination, and both compounds formally correspond to a high oxidation state of +8. Electronic-structure analysis reveals that otherwise unoccupied 6p levels are brought down in energy by the combined effects of pressure and a strong ligand field. The valence expansion of Os and Ir enables ligand-to-metal F 2p→M 6p charge transfer that strengthens M−F bonds and decreases the overall bond polarity. The lower stability of IrF₈, and the instability of PtF₈ and several other compounds below 300 GPa, is explained by the occupation of M−F antibonding orbitals in octafluorides with a metal-valence-electron count exceeding 8.     

A Hydrogen-Deficient Nickel–Cobalt Double Hydroxide for Photocatalytic Overall Water Splitting

Developing highly efficient and low-cost photocatalysts for overall water splitting has long been a pursuit for converting solar power into clean hydrogen energy. Herein, we demonstrate that a nonstoichiometric nickel–cobalt double hydroxide can achieve overall water splitting by itself upon solar light irradiation, avoiding the consumption of noble-metal co-catalysts. We employed an intensive laser to ablate a NiCo alloy target immersed in alkaline solution, and produced so-called L-NiCo nanosheets with a nonstoichiometric composition and O²⁻/Co³⁺ ions exposed on the surface. The nonstoichiometric composition broadens the band gap, while O²⁻ and Co³⁺ ions boost hydrogen and oxygen evolution, respectively. As such, the photocatalyst achieves a H₂ evolution rate of 1.7 μmol h⁻¹ under AM 1.5G sunlight irradiation and an apparent quantum yield (AQE) of 1.38 % at 380 nm.     

Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Atomic Imaging of Subsurface Interstitial Hydrogen and Insights into Surface Reactivity of Palladium Hydrides

Resolving interstitial hydrogen atoms at the surfaces and interfaces is crucial for understanding the mechanical and physicochemical properties of metal hydrides. Although palladium (Pd) hydrides hold important applications in hydrogen storage and electrocatalysis, the atomic position of interstitial hydrogen at Pd hydride near surfaces still remains undetermined. We report the first direct imaging of subsurface hydrogen atoms absorbed in Pd nanoparticles by using differentiated and integrated differential phase contrast within an aberration-corrected scanning transmission electron microscope. In contrast to the well-established octahedral interstitial sites for hydrogen in the bulk, subsurface hydrogen atoms are directly identified to occupy the tetrahedral interstices. DFT calculations show that the amount and the occupation type of subsurface hydrogen atoms play an indispensable role in fine-tuning the electronic structure and associated chemical reactivity of the Pd surface.     

Accelerating Crystallization of Open Organic Materials by Poly(ionic liquid)s

The capability to significantly shorten the synthetic period of a broad spectrum of open organic materials presents an enticing prospect for materials processing and applications. Herein we discovered 1,2,4-triazolium poly(ionic liquid)s (PILs) could serve as a universal additive to accelerate by at least one order of magnitude the growth rate of representative imine-linked crystalline open organics, including organic cages, covalent organic frameworks (COFs), and macrocycles. This phenomenon results from the active C5-protons in poly(1,2,4-triazolium)s that catalyze the formation of imine bonds, and the simultaneous salting-out effect (induced precipitation by decreasing solubility) that PILs exert on these crystallizing species.     

In Situ Pyrolysis Tracking and Real-Time Phase Evolution: From a Binary Zinc Cluster to Supercapacitive Porous Carbon

The in situ tracking of the pyrolysis of a binary molecular cluster [Zn₇(μ₃-CH₃O)₆(L)₆][ZnLCl₂]₂ is presented with one brucite disk and two mononuclear fragments (L=mmimp: 2-methoxy-6-((methylimino)-methyl)phenolate) to porous carbon using TG-MS from 30 to 900 °C. Following up the spilled gas product during the decomposed reaction of zinc cluster along the temperature rising, and in conjunction with XRD, SEM, BET and other materials characterization, where three key steps were observed: 1) cleavage of the bulky external ligand; 2) reduction of ZnO and 3) volatilization of Zn. The real-time-dependent phase-sequential evolution of the remaining products and the processing of pore forming template transformation are proposed simultaneously. The porous carbon structure featuring a uniform nano-sized pore distribution synthesized at 900 °C with the highest surface area of 1644 m² g⁻¹ and pore volume of 0.926 cm³ g⁻¹ exhibits the best known capacitance of 662 F g⁻¹ at 0.5 A g⁻¹.     

Composition-Tunable Antiperovskite CuxIn1−xNNi3 as Superior Electrocatalysts for the Hydrogen Evolution Reaction

A group of newly reported antiperovskite nitrides Cu_xIn_1−xNNi₃ (0≤x≤1) with tunable composition are employed as electrocatalysts for the hydrogen evolution reaction (HER). Cu_0.4In_0.6NNi₃ shows the highest intrinsic performance among all developed catalysts with an overpotential of merely 42 mV at 10 mA cm_geo⁻². Stability tests at a high current density of 100 mA cm_geo⁻² show its super-stable performance with only 7 mV increase in overpotential after more than 60 hours of measurement, surpassing commercial Pt/C (increase of 170 mV). By partial substitution, the derived antiperovskite nitride achieves a smaller kinetic barrier of water dissociation compared to the unsubstituted InNNi₃ and CuNNi₃, revealed by first-principle calculations. It is found that the partially substituted Cu_xIn_1−xNNi₃ possesses a thermal neutral and desirable Gibbs free energy of hydrogen for HER, ascribed to the tailoring of the energy of d-band center arose by the A-site (A=Cu or In) substitution and a resulting optimization of adsorbate interactions.     

Iron-Catalyzed Radical Relay Enabling the Modular Synthesis of Fused Pyridines from Alkyne-Tethered Oximes and Alkenes

We have rationally designed a new class of alkyne-tethered oximes and applied them in an unprecedented iron-catalyzed radical relay protocol for the rapid assembly of a wide array of structurally new and interesting fused pyridines. This method shows broad substrate scope and good functional-group tolerance and enabled the synthesis of several biologically active molecules. Furthermore, the fused pyridines could be diversely functionalized through various simple transformations, such as cyclization, C−H alkylation, and a click reaction. DFT calculation studies indicate that the reactions involve cascade 1,5-hydrogen atom transfer, 5-exo-dig radical addition, and cyclization processes. Moreover, preliminary biological investigations suggest that some of the fused pyridines exhibit good anti-inflammatory activity by restoring the imbalance of inflammatory homeostasis of macrophages in a lipopolysaccharide-induced model.