A new approach for the sequential injection spectrophotometric determination of the total antioxidant activity

A sequential injection system based on the ABTS (2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic-acid) methodology was developed. The proposed method, incorporating a mixing chamber in the side port of the selection valve, was evaluated to measure the total antioxidant activity of several beverages and foods.The ABTS⁺ is generated by oxidation of ABTS with potassium persulfate and is reduced in presence of hydrogen-donating antioxidants converting into a colourless product. The applicability of the developed method was tested by measurement of the antioxidant activity of pure compounds as well as by analysing complex food and beverage samples. The antioxidant activity was presented as l(+) ascorbic acid equivalence. The values obtained by this methodology were not significantly different from the results obtained by the original spectrophotometric ABTS assay. For most of the studied antioxidants, antioxidant activity varied with pH and dilution. The proposed SIA system is suitable for screening direct or diluted total antioxidant activity of pure compounds or food samples.     

Spectrophotometric flow injection determination of total phosphorus in beer using on-line UV/thermal induced digestion

A flow injection system for the automatic determination of total phosphorus in beer is described. The developed manifold uses a two-stage photooxidation/thermal digestion procedure together with oxidizing and hydrolyzing reagents to convert all forms of phosphorus compounds to orthophosphate. Polyphosphates are hydrolyzed by acid and heat, and organo-phosphates are digested by UV-catalyzed peroxodisulfate oxidation. The orthophosphate formed is then spectrophotometrically determined by the phosphomolybdenum blue reaction, using stannous chloride as reducing agent. The results obtained for a set of 19 beer samples (with concentrations from 120 to 735 mg P/L) were in good agreement with the reference method, the maximum relative deviation found being 4.7%. Relative standard deviations for ten consecutive determinations were lower than 1.5%, and a detection limit of 1 mg P/L was achieved.     

The influence of the brewing process on the formation of biogenic amines in beers

Biogenic amines, as dabsyl derivatives, were determined in beer samples, intermediate products, and raw materials (malt and maize) by HPLC. A procedure for the extraction of the amines from malt and maize with diluted hydrochloric acid was optimised by combining a Response Surface Methodology with a Simultaneous Decision Making Approach. The results of the analysis indicate that, in brewing, technology and hygiene are the decisive factors that determine the amine concentrations in the final product.     

On Transition Structures for Hydride Transfer Step in Enzyme Catalysis. A Comparative Study on Models of Glutathione Reductase Derived from Semiempirical, HF, and DFT Methods

As a model of the chemical reactions that take place in the active site of gluthatione reductase, the nature of the molecular mechanism for the hydride transfer step has been characterized by means of accurate quantum chemical characterizations of transition structures. The calculations have been carried out with analytical gradients at AM1 and PM3 semiempirical procedures, ab initio at HF level with 3-21G, 4-31G, 6-31G, and 6-31G basis sets and BP86 and BLYP as density functional methods. The results of this study suggest that the endo relative orientation on the substrate imposed by the active site is optimal in polarizing the C4-Ht bond and situating the system in the neighborhood of the quadratic region of the transition structure associated to the hydride transfer step on potential energy surface. The endo arrangement of the transition structure results in optimal frontier HOMO orbital interaction between NADH and FAD partners. The geometries of the transition structures and the corresponding transition vectors, that contain the fundamental information relating reactive fluctuation patterns, are model independent and weakly dependent on the level of theory used to determine them. A comparison between simple and complex molecular models shows that there is a minimal set of coordinates describing the essentials of hydride transfer step. The analysis of transition vector components suggests that the primary and secondary kinetic isotope effects can be strongly coupled, and this prompted the calculation of deuterium and tritium primary, secondary, and primary and secondary kinetic isotope effects. The results obtained agree well with experimental data and demonstrate this coupling.     

Duality and intersection theory in complex manifolds. I

We introduce the concept of a twisting cochain and a twisted complex associated to a coherent sheaf. For sheaves of submanifolds these twisted complexes are used to construct on cochain level the Grothendieck theory of dual class and Gysin map. These explicit constructions give, for instance, a local formula for dual class of higher codimensional submanifolds. We prove a refined version of the Hirzebruch Riemann Roch using such local formulas. We also prove a theorem on when global analytic intersection classes can be computed from first order geometric data. This theory will be used to prove the Holomorphic Lefschetz formula (in Part II) and the Hirzebruch Riemann Roch for analytic coherent sheaves.The first author is supported in part by NSF grants GP-36418X1 and MCS 76-08478. The second by MCS 75-07986 and Sonderforschungsbereich Theoretische Mathematik at Bonn University     

Eigenvectors and cyclic vectors of bilateral weighted shifts. II: Simply invariant subspaces

Let T be an injective bilateral weighted shift onl ² thought as "multiplication by λ" on a space of formal Laurent series L²(β). (a) If L²(β) is contained in a space of quasi-analytic class of functions, then the point spectrum σ_p(T^?) of T^? contains a circle and the cyclic invariant subspaceM _f of T generated by f is simply invariant (i.e., ∩{(T^k M _f)^?: k ≥ 0}= {0}) for each f in L²(β); (b) If L²(β) contains a non-quasi-analytic class of functions (defined on a circle г) of a certain type related with the weight sequence of T, then there exists f in L²(ß) such thatM _f is a non-trivial doubly invariant subspace (i.e., (TM _f)^? =M _f); furthermore, if г ? σ_p(T^*), then σ_p (T^*) = г and f can be chosen so that σ_p([T∣M _f]^*) = г?{α}, for some α ε г. Several examples show that the gap between operators satisfying (a) and operators satisfying (b) is rather small.     

Diastereoselective Electrophilic Amination of Chiral 1‐Benzoyl‐2,3,5,6‐tetrahydro‐3‐methyl‐2‐(1‐methylethyl)pyrimidin‐4(1H)‐one for the Asymmetric Syntheses of α‐Substituted α,β‐Diaminopropanoic Acids

The chiral compounds (R)‐ and (S)‐1‐benzoyl‐2,3,5,6‐tetrahydro‐3‐methyl‐2‐(1‐methylethyl)pyrimidin‐4(1H)‐one ((R)‐ and (S)‐ 1 ), derived from (R)‐ and (S)‐asparagine, respectively, were used as convenient starting materials for the preparation of the enantiomerically pure α‐alkylated (alkyl=Me, Et, Bn) α,β‐diamino acids (R)‐ and (S)‐ 11 – 13 . The chiral lithium enolates of (R)‐ and (S)‐ 1 were first alkylated, and the resulting diasteroisomeric products 5 – 7 were aminated with ‘di(tert‐butyl) azodicarboxylate’ (DBAD), giving rise to the diastereoisomerically pure (≥98%) compounds 8 – 10 . The target compounds (R)‐ and (S)‐ 11 – 13 could then be obtained in good yields and high purities by a hydrolysis/hydrogenolysis/hydrolysis sequence.     

Flow injection system with gas diffusion for the sequential determination of total nitrogen and phosphorus in vegetables

 A flow injection system was developed for the sequential determination of total nitrogen and phosphorus in digests of vegetables using potentiometric and spectrophotometric detection systems, respectively. A tubular ammonium selective electrode with a sensor system composed of nonactin/monactin in tris(2-ethylhexyl) phosphate was used. The selectivity limitations of this electrode were overcome by the inclusion of a gas-diffusion unit in the system that separated ammonium from the rest of the sample matrix and allowed the determination of total nitrogen and phosphorus by the partition of the sample plug between two streams. The results obtained with the developed FIA system were in good agreement with those of the reference methods. Sampling rates from 40 to 60 samples per hour and relative standard deviations below 3.5% were achieved. Received: 17 October 1996/Revised: 21 November 1996/Accepted: 27 November 1996     

Flow injection system with gas diffusion for the sequential determination of total nitrogen and phosphorus in vegetables

 A flow injection system was developed for the sequential determination of total nitrogen and phosphorus in digests of vegetables using potentiometric and spectrophotometric detection systems, respectively. A tubular ammonium selective electrode with a sensor system composed of nonactin/monactin in tris(2-ethylhexyl) phosphate was used. The selectivity limitations of this electrode were overcome by the inclusion of a gas-diffusion unit in the system that separated ammonium from the rest of the sample matrix and allowed the determination of total nitrogen and phosphorus by the partition of the sample plug between two streams. The results obtained with the developed FIA system were in good agreement with those of the reference methods. Sampling rates from 40 to 60 samples per hour and relative standard deviations below 3.5% were achieved. Received: 17 October 1996/Revised: 21 November 1996/Accepted: 27 November 1996