基于目标信息系统学习的多准则决策方法

给出目标信息系统学习的多准则决策方法，建立多准则决策的规则学习模型，讨论该模型的性质。该模型优于Z．Pawlak方法，将规则提取与信息融合为一体。也优于AHP等模型，具有简洁性．通过实例计算，取得了满意结果。     

锂锰尖晶石红外光谱的研究

本文对锂锰尖晶石的红外光谱进行了研究。由于锂锰尖晶石的晶体结构属于Fd3m空间群,锂离子占据四面体空隙(8a位置),锰离子占据八面体空隙(16d位置)。根据群论的知识,对锂锰尖晶石晶体中离子的振动方式与红外活性之间的内在关系进行了讨论。并列出了锂锰尖晶石的红外光谱实验数据。通过理论分析,我们推断:位于618.6和501.5cm~(-1)的红外吸收带分别来源于Mn(Ⅳ)-O和Mn(Ⅲ)-O键在晶体中的不对称伸缩振动(单元为Mn(Ⅳ)O_6和Mn(Ⅲ)O_6八面体),位于1124cm~(-1)的弱红外吸收带来源于Li-O键的不对称伸缩(单元为LiO_4四面体)。还有一些低于400cm~(-1)的可能吸收带在400～4000cm~(-1)范围内未能检测到。这一结论的可靠性通过锂锰尖晶石和掺杂的锂锰尖晶石的红外光谱实验数据得到证实。     

Foams and surface rheological properties of β-casein, gliadin and glycinin

Interfacial rheological properties and their suitability for foam production and stability of two vegetable proteins were studied and compared to β-casein. Proteins used ranged from flexible to rigid/globular in the order of β-casein, gliadin and soy glycinin. Experiments were performed at pH 6.7. Network forming properties were characterised by the surface dilational modulus (determined with the ring trough) and the critical falling film length (L_still) at which a stagnant protein film will break. Gliadin had the highest dilational modulus, followed by glycinin and β-casein, whereas glycinin formed the strongest film against fracture in the overflowing cylinder. The rate of decrease in the surface tension was studied at the air–water (Wilhelmy plate method) and the oil–water interface (bursting membrane) and the dynamic surface tension during compression and expansion in the caterpillar. Gliadin had the lowest equilibrium interfacial tensions and β-casein the lowest dynamic surface tension during expansion. Hardly any foam could be formed at a concentration of 0.1 g/l by shaking. At a concentration of 1.4 g/l most foam was formed by β-casein, followed by gliadin and glycinin. It seems that in the first place the rate of adsorption is important for foam formation. For the vegetable proteins, adsorption was slow. This resulted in lower foamability, especially for glycinin.     

First-principle studies on the electronic structure of Fe3O4(110) surface

The first-principle was employed to study the six possible models for the Fe₃O₄(110) surface, namely the AB-terminated surface (AB model), the AB-terminated with Fe_A vacancy (AB-Fe_A vac model), the AB-terminated with Fe_B vacancy (AB-Fe_B vac model), the B-terminated surface (B model), the B-terminated surface with Fe_B vacancy (B-Fe_B vac model) and the B-terminated surface with O vacancy (B-O vac model). The stability, the electronic structure and the magnetic properties of the six surface models were also calculated. The results predict that the B-O vac model is more stable than other types of surface models. The half-metallic property remain in the AB and B models, while the other four surface models exhibit metallic properties. At the same time, the AB, AB-Fe_A vac, AB-Fe_B vac, B and the B-Fe_B vac models have ferrimagnetic properties, while the B-O vac model has antiferromagnetic property.      

Fabrication of bamboo-shaped GaN nanorods

Bamboo-shaped GaN nanorods were formed through a simple sublimation method. They were characterized by means of X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selected-area electron diffraction (SAED). The TEM image showed that the nanorods were bamboo-like. XRD, HRTEM and SAED patterns indicated that the nanorods were single-crystal wurtzite GaN. Received: 8 January 2001 / Accepted: 28 April 2001 / Published online: 20 December 2001     

On path lengths modulo three

We show that between any two nodes of a cubic, planar, three-connected graph there are three paths whose lengths are 0, 1, and 2 modulo 3, respectively. The proof is by a rather extensive case analysis. Counterexamples show that all three hypotheses (i.e., planarity, degree-three, and three-connectivity) are necessary.     

Controllability of Functional Integro-Differential Inclusions with an Unbounded Delay

In this paper, a sufficient condition is established for the controllability of neutral functional integro-differential inclusions with an unbounded delay in Banach spaces. The approach used is a fixed-point theorem for condensing maps due to Martelli and the theory of analytic semigroup of linear operators. Communicated by F. Zirilli Research supported by NNSF of China, by the Teaching and Research Award Program for Outstanding Young Teachers in Higher Education Institutions of the Ministry of Education of China, and by the Qing Lan Talent Engineering Fund QL-05-164 of Lanzhou Jiaotong University. The authors are grateful to Professor F. Zirilli and two anonymous referees for valuable suggestions improving this paper.     

Tunneling radiation of a Gibbons-Maeda dilaton black hole

We use the Parikh-Wilczek method to treat Hawking radiation as a tunneling process across the event horizon and calculate the emission rate of a Gibbons-Maeda dilaton black hole. We show that if self-gravitation is taken into account, then the radiation deviates from the purely thermal spectrum, and the corrected spectrum is consistent with an underlying unitary theory. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 151, No. 1, pp. 172–175, April, 2007.     

Geometrical study of paraxial light beam transmission in free space

By introducing an imaginary space transform curvature ρ_s, a complex space called Riemannian space is constructed, in which the light propagating in free space has the trajectory of straight line while propagating. Moreover, this curvature couples with that of the wave front of the paraxial beam ρ_w, and therefore a complex curvature ρ_c is constructed, which can be employed to investigate the behavior of the light transmission and to generalize the ABCD law. Project supported by the National Hi-Tech Inertial Confinement Fusion Committee, the Guangdong Natural Science Foundation the Postdoctoral Foundation of Guangdong and National Postdoctoral Foundation of China.