HPLC determination of 2-furaldehyde and 5-hydroxymethyl-2-furaldehyde in alcoholic beverages

A method for the determination of 2-furaldehyde (F) and 5-hydroxymethyl-2-furaldehyde (HMF) in alcoholic beverages by high performance liquid chromatography (HPLC) is described. A C-18 column and an acetonitrile-water mobile phase with isocratic elution were used. UV detection at 280 nm was carried out. The method was validated according to the EURACHEM guidelines. The procedure offers a high specificity and detection limits of the order of 0.005 μg mL^− 1. Recoveries of 94-103% were obtained from spiked samples at different levels with both analytes. Intermediate precision calculated for a period of 2 months was + 0.8% for HMF and + 0.4% for F. The method was applied to the analysis of alcoholic beverages like bourbon, rum, brandy, liquors and aperitif wines.     

Determination of ageing time of spirits in oak barrels using a headspace–mass spectrometry (HS-MS) electronic nose system and multivariate calibration

The aromatic composition of sugar cane spirits and, in general, of alcoholic beverages, is mainly influenced by the ageing process in wood barrels. There are several factors that affect the quality of the final aged product, but the time of the storage in the barrel is perhaps the most important one. Ageing time must therefore be controlled in order to detect counterfeits; however, this parameter is very difficult to control and, at present, there is no analytical method available to determine it. We propose a quantitative method for determining the ageing time of sugar cane spirits in oak barrels by using an electronic nose based on coupling directly a headspace sampler to a mass spectrometer (HS-MS), and multivariate calibration. The method developed is simple and provides, in 5 min, the ageing time of spirits with an accuracy of about 1 month.     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

Application of molecular absorption properties of horseradish peroxidase for self-indicating enzymatic interactions and analytical methods

In this paper an in depth study is presented of the use of the horseradish peroxidase (HRP) enzyme as a self-indicating biorecognition reagent in UV-vis molecular absorption spectrometry. The HRP/H2O2 reaction mechanism in the absence of an external substrate has been clarified, and the interaction between HRP and glucose oxidase (GOx) has been studied. It has been demonstrated that GOx can act as a substrate of HRP; in both cases the kinetic constants have been obtained and mathematical models have been developed. Second, the HRP/H2O2 reaction is used to follow a H2O2-producing enzymatic reaction, the glucose reaction with GOx being used as a model. As an application of this, two methodologies have been proposed for glucose determination: with or without previous incubation of glucose with GOx. In both cases mathematical models relating HRP absorbance changes to glucose concentration have been developed and tested; both methods have been optimized, analytically characterized, and tested for glucose determination in samples. The methodology described could be applied to other heme-proteins and to other H2O2-producing enzymatic reactions. The models permit the reaction constants to be calculated. From the analytical chemistry point of view the models allow the prediction of the method sensitivity for other analytes involved in this type of reaction if the kinetic constants are known and can be used in the design of optical sensors.     

Indene and pseudoazulene discotic liquid crystals: a synthetic and structural study

Several new liquid-crystalline indene and pseudoazulene systems are reported. These molecules give rise to either columnar hexagonal mesophases and/or columnar plastic phases. The unique nature of these compounds stems from their non-classical discotic structure. Although the molecules have rigid aromatic cores, they lack terminal tails and instead the polarizable atoms (S, halogens) or polar groups (CN, CO) act as unusual soft parts. On the basis of many structurally related materials, we conclude that for this type of compound molecular stacking in the solid state is a prerequisite for the appearance of a columnar mesophase, although other intermolecular interactions within the layers are also important in establishing liquid-crystalline order. The behavior reported for these mesomorphic molecules opens up new possibilities in the search for related molecular interactions that might be useful for the construction of supramolecular architectures with particular properties.     

Mixtures of sodium dodecyl sulfate/dodecanol at the air/water interface by computer simulations

Molecular dynamics simulations of monolayers of surfactant mixtures at the air/water interface were performed where the binary mixture was composed of sodium dodecyl sulfate (SDS) and dodecanol molecules. At the same ratio of SDS and dodecanol molecules, two monolayer mixtures were prepared. In the first monolayer, all the dodecanol molecules were placed together in the center of the simulation box, whereas in the second monolayer, those molecules were uniformly distributed in the surface area in such a way that they were far from each other. Simulations of both systems indicate that the dodecanol tails in the first monolayer are straighter and more ordered than those in the second monolayer. From the present results, we observed new insights of how the different molecules should array or distribute at the interface in real systems. Finally, studies of the interfacial water around the different surfactants were also analyzed, showing that they are closer to the polar headgroups of dodecanol than to the SDS headgroups.     

Reaction of 2H-azirine phosphine oxide and -phosphonates with nucleophiles. Stereoselective Synthesis of functionalized aziridines and alpha- and beta-aminophosphorus derivatives

[reaction: see text] A simple and efficient stereoselective synthesis of aziridine-2-phosphonate 3, and -phosphine oxide 5 by diastereoselective addition of Grignard reagents to 2H-azirine phosphonate 1 and -phosphine oxide 4 is reported. Similarly, the addition of heterocyclic amines and benzenethiol to aziridines 1 and 4 yielded functionalized aziridines 10, 11, and 18. These aziridines are used as intermediates for the regioselective synthesis of beta-aminophosphine oxides 6 and beta-aminophosphonates 7, as well as alpha- aminophosphonates 8. Phenylsulfenyl-substituted alpha-aminophosphorus derivatives 15 and 19 are obtained directly from benzenethiol and 2H-azirine phosphonates 1 and -phosphine oxides 4.     

Covalent bonding of alkene and alkyne reagents to graphitic carbon surfaces

Various aromatic and aliphatic alkynes and one alkene were covalently bonded to sp(2)-hybridized carbon surfaces by heat treatment in an argon atmosphere. X-ray photoelectron spectroscopy, Raman, and FTIR spectra of the modified surfaces showed that the molecules were intact after the 400 degrees C heat treatment but that the alkyne group had reacted with the surface to form a covalent bond. Alkynes with ferrocene and porphyrin centers exhibited chemically reversible voltammetric waves that could be cycled many times. Atomic force microscopy of the modified surfaces indicated a thickness of the molecular layer consistent with monolayer coverage, and surface coverage determined by voltammetry was also in the monolayer range. Raman spectroscopy of the porphyrin monolayers formed from a porphyrin alkyne showed no evidence for dimer formation, although multilayer formation may occur at undetected levels. FTIR spectra of the porphyrin-modified carbon surfaces were well-defined, similar to the parent molecule, and indicative of an average tilt angle between the porphyrin plane and the surface normal of 37 degrees . The bond between the molecular monolayer and the carbon surface was quite stable, withstanding sonication in tetrahydrofuran, mild aqueous acid and base, and repeated voltammetric cycling in propylene carbonate electrolyte. Heat treatment of alkynes and alkenes appears to be a generally useful method for modifying carbon surfaces, which can be applied to both aromatic and aliphatic molecules.     

Synthesis and molecular structure of methyl 4-O-methyl-alpha-D-glucopyranuronate

A method for the preparation of methyl 4-O-methyl-alpha-D-glucopyranuronate and its single crystal X-ray structure determination are reported. The molecule adopts an almost ideal (4)C1 ((degree)C3) conformation.     

Surface Characterization of Sepiolite by Inverse Gas Chromatography

Inverse gas chromatography (IGC) was applied to characterize the surface of sepiolite. The adsorption thermodynamic parameters (the standard enthalpy (ΔH ⁰), entropy (ΔS ⁰) and free energy of adsorption (ΔG ⁰)), the dispersive component of the surface energy (γ _S ^d ), and the acid/base character of sepiolite surface were estimated by using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (ΔG ^sp ), the specific enthalpy of adsorption (ΔH ^sp ), and the specific entropy of adsorption (ΔS ^sp ) of polar probes on sepiolite were determined. ΔH ^sp were correlated with the donor and modified acceptor numbers of the probes to quantify the acidic K _A and the basic K _D parameters of the sepiolite surface. The values obtained for the parameters K _A and K _D indicated an acidic character for sepiolite surface.