基于径向基函数神经网络的Lorenz混沌系统滑模控制

针对受参数不确定和外扰影响的混沌Lorenz系统，提出一种基于径向基函数（RBF）神经网 络的滑模控制方法.基于被控系统在不稳定平衡点处状态误差的可控规范形，设计滑模切换 面并将其作为神经网络的唯一输入.单入单出形式的RBF控制器隐层只需7个径向基函数，网 络的权值则依滑模趋近条件在线确定.仿真表明该控制器对系统参数突变和外部干扰具有鲁棒性，同时抑制了抖振. 关键词： 混沌控制 滑模 径向基函数神经网络 Lorenz系统     

Synthesis of New 13-O-Acylavermectin Bl Aglycones

Six new 13-O-acylavermectin Bl aglycones(3-8) were synthesized from avermectin B1 aglycone and their bioactivities were evaluated against Spodoptera exigua, Spodoptera eridania, Tetranychus urticae and Aphis fabae.     

Metabolites of A Novel Antibiotic Bitespiramycin in Rat Urine and Bile

A sensitive analytical method to identify active metabolites of bitespiramycin in rat urine and bile was developed by liquid chromatography-electrospray ionization tandem mass spectrometry(LC/ESI-MS^n).Bitespiramycin and its major active metabolites in rat urine and bile were isolated and identified as M1 serial(spiramycin Ⅰ，Ⅱ，Ⅲ),M2 serial(platenomycin A1,josamycin and leucomycin A1) and M3 serial(deisovalerylplatenomycin A1,deisovaleryljosamycin,deisovalerylleucomycin A1).     

Baker＇s Yeast Mediated Reduction of Optically Active Diketone

Baker‘s yeast mediated reduction of optically active diketone is described. The two keto groups are efficiently differentiated and the ee value of the recovered material is considerably raised. It affords highly optically active key intermediates efficiently for the synthesis of natural polyhydroxylated agarofuran products.     

The Isoelectric Point and the Points of Zero Charge of Fe-Al-Mg Hydrotalcite-like Compounds

The relation of the isoelectric point (IEP) and the point of zero net charge (PZNC) of the hydrotalcite-like compounds was discussed. It was found that the IEP does not equal to the PZNC and the IEP is higher than the PZNC. The structural positive charges existing in the HTlc,which cause the difference between the IEP and the PZNC. The effects of the structural positive charges of the HTlc on its IEP and PZNC are the same as the specific adsorption of metal cations.     

A Novel Cardiac Glycoside from Parepigynum funingesis

From the dried aerial part ofParepigynumfuningesis Tsiang et P. T. Li (Apocynaceae),a new cardiac glucoside, named parefuningoside (1) had been isolated. Its structure was determined by means of hydrolysis and spectral analysis.     

On the identification of degenerate indices in the nonlinear complementarity problem with the proximal point algorithm

In this paper we focus on the problem of identifying the index sets P(x):=i|x_i>0, N(x):={i|F_i(x)>0 and C(x):=i|x_i=F_i(x)=0} for a solution x of the monotone nonlinear complementarity problem NCP(F). The correct identification of these sets is important from both theoretical and practical points of view. Such an identification enables us to remove complementarity conditions from the NCP and locally reduce the NCP to a system which can be dealt with more easily. We present a new technique that utilizes a sequence generated by the proximal point algorithm (PPA). Using the superlinear convergence property of PPA, we show that the proposed technique can identify the correct index sets without assuming the nondegeneracy and the local uniqueness of the solution.This work was supported in part by a Grant-in-Aid for Scientific Research from the Ministry of Education, Science, Sports and Culture of Japan.Mathematics Subject Classification (2000): 90C33, 65K10     

生物质洁净能源研究中的流化床动力学模型

分别对最小流化床、鼓泡流化床和腾涌流化床及相应的全混模型、鼓泡模型、气泡汇集模型等加以综述 ,分析其优缺点 ,并在此基础上提出动力学模拟研究的新思路 .根据流化床内在的本质———流化态的不同 ,将流化床分为最小流化床、鼓泡流化床和腾涌流化床三种 .总结了前人针对各种流化床提出的全混模型、鼓泡模型、气泡汇集模型等思想 ,建议今后可以在以下几个方面进行深入研究 :⑴使得模型更有普适性 .⑵由于气泡有效直径尚不能在理论上求得 ,可以在理想气泡直径变化公式的基础上 ,加入非线性化学的计算 .⑶确定不同情况下的参数 ,使得工作更有延续性 ,也使得模型更加具有生命力 .⑷从高压的角度去进行模型的计算 ,并得到相应的试验数据支持 .     

微模塑法制备PMMA/SiO2二氧化硅杂化材料微结构

以摩尔比为 1∶1的甲基丙烯酸甲酯 (MMA)、甲基丙烯酸 (3 三乙氧基硅烷基 )丙酯 (ESMA)单体、0 .2 %(单体总量的质量分数 )的偶氮二异丁腈AIBN引发剂和四氢呋喃 (THF)溶剂 ,及 2 0 % (总质量分数 )的正硅酸乙酯TEOS合成出PMMA/SiO2 有机 无机杂化的杂化溶胶 .将溶胶在洗净的普通光学玻璃基片表面甩膜 .利用软刻蚀中的微模塑法 ,把有机硅弹性印章复制有精细图纹一面轻放在杂化溶胶膜上进行微模塑 ,外加 1N压力于12 0℃下处理 2h使溶胶凝胶化 .印章剥离后在基片表面就形成了PMMA/SiO2 有机 无机杂化材料的微图纹结构 .从微图纹的光学显微镜照片可以看出微模塑方法制备杂化材料复制的图纹精细度高 ,操作简单易行 ,是一类比较理想的微细图纹结构加工的方法 .