On the efficient evaluation of Fourier patterns for nanoparticles and clusters

Samples made of an isotropically oriented ensemble of atomic clusters or structures that are not large crystals (i.e. extended less than 10 periods in each direction) are at the frontier of today's material science and chemistry. Examples are nanoparticles, nanotubes, amorphous matter, polymers, and macromolecules in suspension. For such systems the computation of powder diffraction patterns (which may provide an efficient characterization) is to be performed the hard way, by summing contributions from each atom pair. This work deals with performing such computation in the most practical and efficient way. Three main points are developed: how to encode the enormous array of interatomic distances (which increase as the square or higher powers of the cluster diameter) to a much smaller array of equispaced values on a coarse grid (whose size increases linearly with the diameter); how to perform a fast computation of the diffraction pattern from this equispaced grid; how to optimize the grid step to obtain an arbitrarily small error on the computed diffraction pattern. Theory and examples are jointly developed and presented.     

Polyurethane foam chips combined with liquid chromatography in the determination of unmetabolized polycyclic aromatic hydrocarbons excreted in human urine

A method suitable for the determination of unmetabolized polycyclic aromatic hydrocarbons (PAHs) excreted at trace levels (ng/L) in human urine for the monitoring of exposure of the general population to PAH contamination was developed. PAHs were determined, after enrichment by solid-phase extraction on polyurethane foam (PUF) chips, by HPLC with fluorescence detection. Different parameters affecting analyte extraction to the PUF, including urine salting-out and organic additives, and optimization of conditions for clean-up and desorption have been investigated. Optimized conditions were 40 mL acidified urine sample, added with magnesium sulfate, tetrahydrofuran and a 2 cm3 PUF chip, and extracted by shaking at 30 rpm for 1 h at ambient temperature. Desorption was performed, after a clean-up step with diluted sodium hydroxide, using a small amount of diethyl ether. The recovery of PAH congeners from spiked urines was >90% in the 2-100 ng/L range; the detection limit was 0.1-0.5 ng/L, depending on the considered PAH congener; day-to-day precision, at 50 ng/L native PAH content, was CV = 10-20%. The proposed technique provides a simple, economical and effective procedure for the determination of trace amounts of unmetabolized PAHs excreted in human urine spot samples.     

Rotation Number and Exponential Dichotomy for Linear Hamiltonian Systems: From Theoretical to Numerical Results

The paper considers the rotation number for a family of linear nonautonomous Hamiltonian systems and its relation with the exponential dichotomy concept. We propose numerical techniques to compute the rotation number and we employ them to infer when a given system enjoys or not an exponential dichotomy. Comparisons with QR-based techniques for exponential dichotomy will give new insights on the structure of the spectrum for the one-dimensional quasi-periodic Schrödinger operator. Experiments on the two dimensional Schrödinger equation will be presented as well.     

Metabolomic Profiling of Fresh Goji (Lycium barbarum L.) Berries from Two Cultivars Grown in Central Italy: A Multi-Methodological Approach

The metabolite profile of fresh Goji berries from two cultivars, namely Big Lifeberry (BL) and Sweet Lifeberry (SL), grown in the Lazio region (Central Italy) and harvested at two different periods, August and October, corresponding at the beginning and the end of the maturation, was characterized by means of nuclear magnetic resonance (NMR) and electrospray ionization Fourier transform ion cyclotron resonance (ESI FT-ICR MS) methodologies. Several classes of compounds such as sugars, amino acids, organic acids, fatty acids, polyphenols, and terpenes were identified and quantified in hydroalcoholic and organic Bligh-Dyer extracts. Sweet Lifeberry extracts were characterized by a higher content of sucrose with respect to the Big Lifeberry ones and high levels of amino acids (glycine, betaine, proline) were observed in SL berries harvested in October. Spectrophotometric analysis of chlorophylls and total carotenoids was also carried out, showing a decrease of carotenoids during the time. These results can be useful not only to valorize local products but also to suggest the best harvesting period to obtain a product with a chemical composition suitable for specific industrial use. Finally, preliminary studies regarding both the chemical characterization of Goji leaves generally considered a waste product, and the biological activity of Big Lifeberry berries extracts was also investigated. Goji leaves showed a chemical profile rich in healthy compounds (polyphenols, flavonoids, etc.) confirming their promising use in the supplements/nutraceutical/cosmetic field. MG63 cells treated with Big Lifeberry berries extracts showed a decrease of iNOS, COX-2, IL-6, and IL-8 expression indicating their significant biological activity.     

Deflection of a 100-MeV positron beam by repeated reflections in thin crystals

The phenomenon of the deflection of a charged particle beam due to channeling in a bent crystal is thoroughly investigated and successfully applied for the extraction of the beam in high-energy accelerators, at the energies of about 10 GeV and higher. However, a big practical interest lies in the task of bending and extracting charged particles with energies below 1 GeV, for example, for the production of ultrastable beams of low emittance for medical and biological applications. That is why a novel crystal technique, namely thin straight crystal targets, is investigated in this article, using crystals as elements for extraction and collimation of the circulating beam in a ring accelerator. The advantages of reflection in straight crystals in comparison with bent crystal channeling consist in the small length of straight crystals along the beam that reduces the amount of nuclear interactions and improves the background. Experimental results were obtained for the bending of a 100 MeV positron beam with using five sequential straight crystals.     

Three‐dimensional coherent diffractive imaging on non‐periodic specimens at the ESRF beamline ID10

The progress of tomographic coherent diffractive imaging with hard X‐rays at the ID10 beamline of the European Synchrotron Radiation Facility is presented. The performance of the instrument is demonstrated by imaging a cluster of Fe₂P magnetic nanorods at 59 nm 3D resolution by phasing a diffraction volume measured at 8 keV photon energy. The result obtained shows progress in three‐dimensional imaging of non‐crystalline samples in air with hard X‐rays.     

β-Fe2O3 nanomaterials from an iron(II) diketonate-diamine complex: a study from molecular precursor to growth process

Iron oxide is a key multi-functional material in many different fields of modern technology. The β-Fe(2)O(3) cubic phase, one of the least studied Fe-O systems, was obtained by Chemical Vapor Deposition (CVD) using for the first time a Fe(II) β-diketonate diamine complex, Fe(hfa)(2)·TMEDA, as the molecular source (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N',N'-tetramethylethylenediamine). The strong visible light absorption of β-Fe(2)O(3) deposits highlights their possible functional application in photocatalytic hydrogen production under solar light. A comprehensive investigation on the Fe(ii) complex, performed by a joint experimental-theoretical approach, explains the molecular origin of its excellent thermal behaviour and reveals why this species is a successful precursor for the CVD of iron oxide nanostructures.     

Influence of dissolution processing of PVA blends on the characteristics of their hydrogels synthesized by radiation—Part I: Gel fraction,swelling, and mechanical properties

In this work several hydrogels were obtained with two different poly(vinyl alcohol)s/PVAs as the main polymer in aqueous solutions containing 10% of PVA, 0.6% of agar, and 0.6% of κ-carrageenan (KC), cross-linked by gamma-rays from a ⁶⁰Co irradiation source. The PVAs tested have different degrees of hydrolysis and viscosities at 4% with values closed to 30 mPa s. The aqueous polymeric solutions were prepared using two distinct processes: the simple process of heating–stirring and that of making use of an autoclave. The purpose of this study was to evaluate the influence of the dissolution process by means of both methods on the hydrogels’ properties obtained. These were investigated by means of degree of cross-linking/gel fraction, degree of swelling in water, and some mechanical properties. The results that are obtained for hydrogels synthesized from solutions of PVA, agar, KC, and blends thereof prepared by both dissolution processes showed higher degrees of swelling for hydrogels from the autoclaved polymer solutions than those from the solutions prepared by simple heating–stirring process. Furthermore, their hydrogels containing totally hydrolyzed PVA displayed higher tensile strength and lower elongation properties.     

Development of a stereoselective Ugi reaction starting from an oxanorbornene β-amino acid derivative

We have synthesised a novel oxanorbornene β-aminoacid derivative and employed it in a stereoselective Ugi reaction. Hypothesis regarding the mechanism taking place during the reaction have been made and validated through the determination of the relative and absolute configuration of the Ugi adducts. Use of the correct choice of solvents can increase stereoselection. The resulting bicyclic peptidomimetics can be used as a novel class of pluripotent substrates to be elaborated according to the synthetic strategies previously elaborated in our laboratories.     

Immobilization of kojic acid in ZnAl-hydrotalcite like compounds

Kojic acid (KOJ) is a melanin synthesis inhibitor widely used as skin lightening agent in topical preparations. Unfortunately it is easily susceptible to photo-oxidation, phenomenon responsible for chemical and organoleptic modifications. The aim of this work was the intercalation of KOJ in hydrotalcite-like compounds (HTlc) in order to stabilize KOJ and to reduce its photolability. Hydrotalcite containing Zn and Al (ZnAl-HTlc) was used as host to obtain the final compound ZnAl-HTlc-KOJ. The intercalation was carried out, after many attempts, by ionic exchange mechanism by means of the strong base EtO^? in anhydrous ethanol/dimethylsulfoxide (DMSO) mixture as solvent in order to generate KOJ^? anions. The final product was characterized by the X-ray powder diffraction (XRPD), FT-IR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and elemental analysis. The intercalated compound was formulated in a siliconic water free self-emulsifying ointment and the in vitro release profile was evaluated. All samples (intercalation compound and its formulation) were submitted also to spectrophotometric assays in order to evaluate the matrix protective effect towards ultraviolet rays.