Copper‐catalyzed Clauson–Kass pyrroles synthesis in aqueous media

An efficient and convenient copper‐catalyzed Clauson–Kass reaction of 2,5‐dimethoxytetrahydrofuran with amines in aqueous media has been developed, providing a wide range of N‐substituted pyrroles in good yields. It is noteworthy that the Clauson–Kass reaction of 2,5‐dimethoxytetrahydrofuran with p‐phenylenediamine or m‐phenylenediamine proceeds smoothly to afford the corresponding monopyrroles and bispyrroles with high selectivity in impressive yields. A plausible mechanism for the formation of N‐substituted pyrroles has been proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

Crystallization kinetics and crystallization behavior of syndiotactic polystyrene/clay nanocomposites

We investigated the effects of montmorillonite (clay) on the crystallization kinetics of syndiotactic polystyrene (sPS) with isothermal differential scanning calorimetry analyses. The clay was dispersed into the sPS matrix via melt blending on a scale of 1–2 nm or up to about 100 nm, depending on the surfactant treatment. For a crystallization temperature of 240 °C, the isothermal crystallization data were fitted well with the Avrami crystallization equation. Crystallization data on the kinetic parameters (i.e., the crystallization rate constant, Avrami exponent, clay content, and clay/surfactant cation‐exchange ratio) were also investigated. Experimental results indicated that the crystallization rate constant of the sPS nanocomposite increased with increasing clay content. The clay played a vital role in facilitating the formation on the thermodynamically more favorable all‐β‐form crystal when the sPS was melt‐crystallized. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2097–2107, 2001     

Dielectric properties of the nanoporous MCM-41 matrix filled with the (NH4)2SO4 ferroelectric

Variations with temperature of the linear dielectric permittivity and amplitude of the third harmonic were studied for nanoporous MCM-41 matrices with 4.0-nm channel pores filled with the (NH₄)₂SO₄ ferroelectric, in comparison with bulk ammonium sulfate. The measurements were performed upon heating and cooling in the temperature range from 100 K to room temperature. A noticeable shift to low temperatures (by approximately 25 K) for the ferroelectric phase transition in the MCM-41/(NH₄)₂SO₄ nanocomposite as compared to bulk (NH₄)₂SO₄ was revealed. The temperature hysteresis observed at the phase transition in the nanocomposite was approximately 2 K which is close to that in bulk ammonium sulfate. The significant decrease of the transition temperature in nanostructured ammonium sulfate agrees with the theoretical predictions based on the Landau and Ising models of the size effect on the ferroelectric phase transition in isolated small particles.     

Hydrodechlorination of chlorophenols over Pd catalysts supported on zeolite Y,MCM-41 and graphene

Hydrodechlorination (HDC) reaction of chlorophenols was carried out using Pd catalysts supported over zeolite Y, MCM-41 or graphene. Pd-MCM-41 and Pd-Y zeolite were prepared by impregnation and ion-exchange method, respectively. Pd-graphene (Pd-G) was prepared by hydrazine hydrate reduction of palladium ion dispersed on graphene oxide. The catalysts were characterized by several analytical tools such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). These catalysts were subjected to HDC reaction of chlorophenols, such as 4-chlorophenol (4-CP), 2,4-dichlorophenol (2,4-DCP), 2,6-dichlorophenol (2,6-DCP) and 3,4-dichlorophenol (3,4-DCP). The reaction rate of HDC of chlorophenols catalyzed by Pd catalysts with various solid bases, such as KF/Al₂O₃ (alumina), sodium acetate (NaOAc) and K₂CO₃ was compared. First, Pd-MCM-41 and Pd-Y catalysts were compared. 2,4- and 3,4-DCPs were completely decomposed within 6 h, in the case of Pd-MCM-41 with NaOAc. Using Pd-Y instead of Pd-MCM-41 with NaOAc, much faster decomposition was observed. Faster decomposition of 4-CP and DCPs was observed with NaOAc base than K₂CO₃ or KF/Al₂O₃ under the same condition. In the case of Pd-Y with KF/Al₂O₃, slower decomposition of 4-CP and DCPs was observed. These base effects were interpreted using the solubility of NaCl and KCl in alcohol and the basic sites of KF/Al₂O₃. Because the solubility of NaCl is known to be larger than KCl solubility in alcohol, byproduct NaCl could be easily dissolved and ionized in solvents. For Pd-Y with KF/Al₂O₃, the small pore size of Y zeolite can interfere with the diffusion of HCl to KF/Al₂O₃ basic site. Second, three catalysts, including Pd-graphene, were compared. 2,4-DCP was decomposed within 2 h using Pd-G with either K₂CO₃, NaOAc or KF/Al₂O₃. Pd-G catalyst showed the highest catalytic activity among Pd-G, Pd-MCM-41 and Pd-Y catalysts. The high activity and stability of the Pd-G could be attributed to the strong metal–support interaction with an electron-deficient site and a critical Pd particle size (ca. 3.5 nm) of Pd-G nanocatalyst with a stronger resistance to the deactivation and good affinity toward aromatic organic molecules, especially phenols. The progress of HDC reaction was monitored by gas chromatography with flame ionization detection (GC/FID), and a feasible degradation process could be explained by analyzing the degradation products such as phenol, cyclohexanone and cyclohexanol from resulting GC chromatograms. The effect of reaction temperature on HDC in Pd-G catalyst was also discussed. In conclusion, Pd-G is an efficient catalyst for decomposition of chlorophenols and can be applied to remediation of chlorophenol-contaminated water under mild conditions.     

Composition dependent phase transformation of Pt0.5−x Mn0.5+x from A1 to L10 phase

Pt_0.5−x Mn_0.5+x films were prepared by sputtering deposition of Pt foil and Mn target to study the order-disorder transition from a thermodynamic metastable fcc (A1) phase to L1₀ phase. Both Differential Scanning Calorimetry and High Temperature X-Ray Diffraction studies showed the phase transformation from fcc to the L1₀ structure for the Pt_0.50Mn_0.50 and Pt_0.40Mn_0.60 samples but along completely different kinetic paths. A composition dependent phase transformation was observed by comprehensive Differential Scanning Calorimetry studies on a series of Pt_0.5−x Mn_0.5+x samples. The changes of the lattice parameter and the cell volume of L1₀ Pt_0.5−x Mn_0.5+x as a function of composition suggest that the anti-site is not the dominant point defect for L1₀ Pt_0.5−x Mn_0.5+x .     

Superiority of zoom lens coupling in designing a novel X-ray image detector

We design a novel X-ray image detector by lens coupling a Gd2O2S:Tb intensifying screen with a high performance low-light-level (L3,which often means luminescence less than 10-3 Lux) image intensifier.Different coupling effects on imaging performance between zoom lens and fix-focus lens are analyzed theoretically.In experiment,for designing a detector of 15-inch visual field,the system coupled by zoom lens is of 12.25-1p/cm resolution,while the one with fix-focus lens is 10 lp/cm.The superiority of zoom lens is validated.It is concluded that zoom lens preserves the image information better than fix-focus lens and improves the imaging system's performance in this design,which is referential to the design of other optical imaging systems.     

A Robust Algorithm for Blind Total Variation Restoration

Image restoration is a fundamental problem in image processing. Blind image restoration has a great value in its practical application. However, it is not an easy problem to solve due to its complexity and difficulty. In this paper, we combine our robust algorithm for known blur operator with an alternating minimization implicit iterative scheme to deal with blind deconvolution problem, recover the image and identify the point spread function（PSF）. The only assumption needed is satisfy the practical physical sense. Numerical experiments demonstrate that this minimization algorithm is efficient and robust over a wide range of PSF and have almost the same results compared with known PSF algorithm.     

What is Q-Curvature?

Branson’s Q-curvature is now recognized as a fundamental quantity in conformal geometry. We outline its construction and present its basic properties.