Biomimetic membrane arrays on cast hydrogel supports

Lipid bilayers are intrinsically fragile and require mechanical support in technical applications based on biomimetic membranes. Tethering the lipid bilayer membranes to solid substrates, either directly through covalent or ionic substrate-lipid links or indirectly on substrate-supported cushions, provides mechanical support but at the cost of small molecule transport through the membrane-support sandwich. To stabilize biomimetic membranes while allowing transport through a membrane-support sandwich, we have investigated the feasibility of using an ethylene tetrafluoroethylene (ETFE)/hydrogel sandwich as the support. The sandwich is realized as a perforated surface-treated ETFE film onto which a hydrogel composite support structure is cast. We report a simple method to prepare arrays of lipid bilayer membranes with low intrinsic electrical conductance on the highly permeable, self-supporting ETFE/hydrogel sandwiches. We demonstrate how the ETFE/hydrogel sandwich support promotes rapid self-thinning of lipid bilayers suitable for hosting membrane-spanning proteins.     

Non-DLVO silica interaction forces in NMP-water mixtures. II. An asymmetric system

The interaction between energetically asymmetric hydrophilic and hydrophobic surfaces has fundamental and practical importance in both industrial and natural colloidal systems. The interaction forces between a hydrophilic silica sphere and a silanated, hydrophobic glass plate in N-methyl-2-pyrrolidone (NMP)-water binary mixtures were measured using atomic force microscopy (AFM). A strong and long-range attractive force was observed in pure water and was attributed to the formation of capillary bridges associated with nanoscale bubbles initially present on the hydrophobic surface. When NMP was added, the capillary force and corresponding pull-off force became less attractive, which was explained readily in terms of the surface wettability by the binary solvent mixture. Similar to the case of symmetric (two hydrophilic) surfaces, the range of attraction between the asymmetric surfaces was maximized at around 30 vol % NMP, which is consistent with the formation of a thick adsorbed macrocluster layer on the hydrophilic silica surface.     

The identification of synthetic organic pigments in modern paints and modern paintings using pyrolysis-gas chromatography-mass spectrometry

A collection of more than 70 synthetic organic pigments were analysed using pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). We report on the analysis of diketo-pyrrolo-pyrrole, isoindolinone and perylene pigments which are classes not previously reported as being analysed by this technique. We also report on a number of azo pigments (2-naphthol, naphthol AS, arylide, diarylide, benzimidazolone and disazo condensation pigments) and phthalocyanine pigments, the Py-GC-MS analysis of which has not been previously reported. The members of each class were found to fragment in a consistent way and the pyrolysis products are reported. The technique was successfully applied to the analysis of paints used by the artist Francis Bacon (1909-1992), to simultaneously identify synthetic organic pigments and synthetic binding media in two samples of paint taken from Bacon's studio and micro-samples taken from three of his paintings and one painting attributed to him.     

Rapid and simultaneous determination of hexapeptides (Ac-EEMQRR-amide and H2N-EEMQRR-amide) in anti-wrinkle cosmetics by hydrophilic interaction liquid chromatography-solid phase extraction preparation and hydrophilic interaction liquid chromatography with tandem mass spectrometry

A rapid method for the simultaneous determination of Ac-EEMQRR-amide and H(2)N-EEMQRR-amide in cosmetic products was developed and evaluated. This analytical procedure involved extracting samples with 0.1:0.1:85:15 (v:v) trifluoroacetic acid (TFA):formic acid:acetonitrile (ACN):water and determination by hydrophilic interaction liquid chromatography with tandem mass spectrometry (HILIC-MS/MS). Samples showing serious ion suppression were further cleaned up using HILIC-SPE prior to HILIC-MS/MS analysis. Stable isotopically labeled peptides, corresponding to the above two peptides, were used as internal standards to correct for loss of recovery and matrix effects. Electrospray ionization (ESI) in the positive mode was used. The linear range was 2.0-1000 ng/mL for Ac-EEMQRR-amide and 25.0-2500 ng/mL for H(2)N-EEMQRR-amide. Thirteen commercial products were analyzed for the two peptides using this method. The amounts of Ac-EEMQRR-amide in the samples ranged from none detected to 42.3 μg/g. H(2)N-EEMQRR-amide was not detected in any of the samples. The recoveries for Ac-EEMQRR-amide and H(2)N-EEMQRR-amide ranged from 85% to 110% and 84% to 119%, respectively, at the spiking level of 30 μg/g.     

New heterocycles of 2,3‐diaryl‐substituted maleic hydrazides

2,3‐Diaryl‐substituted maleic anhydrides were prepared by a modified one‐pot synthesis of Perkin condensation using mixed sodium salts of arylglyoxylic acid and arylacetic acid with acetic anhydride in 1,4‐dioxane. The treatment of these anhydrides with ammonium bicarbonate, or methanolic hydrazine, offered the corresponding 2,3‐diaryl‐substituted maleimides and maleic hydrazides (4,5‐diaryl‐substituted 1,2‐dihydropyridazine‐3,6‐dione), respectively. Evidence obtained from NMR, UV, and mass spectra suggest that 2,3‐diaryl‐substituted maleic hydrazides do not exhibit monolactim forms. Ring contraction of the diaryl‐substituted maleic hydrazide by nitrosation led to the formation of the corresponding maleimide. Interconversion between the corresponding maleic hydrazide and maleimide was observed following equilibrium reaction. Our experiment proposes that the chemistry of 2,3‐diaryl‐substituted maleic hydrazides rarely involves the function of ethylene moiety and resembles that of succinic hydrazine. J. Heterocyclic Chem.,(2011).     

Integration of a macro/micro architectured compartmentalised neuronal culture device using a rapid prototyping moulding process

The rapid prototyping of a reversible and one step moulded compartmentalised neuron glass/PDMS device with a thin wall barrier directly adjacent to the reservoirs is presented. A simple moulding technique to produce these devices results in a barrier of 560 μm where the 3 μm deep by 8 μm wide channels can be reversibly fabricated in either the glass base or PDMS compartmentalised mould depending on the type of application required. Using glass substrates with commercially laser engraved microchannels, both the PDMS planar and PDMS channelled device can be easily fabricated in a standard laboratory. The compartmentalised device has several advantages including good experimental accessibility and versatility with a variety of end user applications.     

Oxygen transfer processes in (La,Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study

Impedance spectroscopy was used to study the oxygen reaction kinetics of La_0.8Sr_0.2MnO₃ (LSM)-based electrodes on Y₂O₃-stabilized ZrO₂ (YSZ) electrolytes. Three types of electrodes were studied: pure LSM, LSM–YSZ composites, and LSM/LSM–YSZ bilayers. The electrodes were formed by spin coating and sintering on single-crystal YSZ substrates. Measurements were taken at temperatures ranging from 550 to 850°C and oxygen partial pressures from 1×10⁻³ to 1 atm. An arc whose resistance R_el had a high activation energy, E_a=1.61±0.05 eV, and a weak oxygen partial pressure dependence, (P_O2)^−1/6, was observed for the LSM electrodes. A similar arc was observed for LSM–YSZ electrodes, where R_el(P_O2)^−0.29 and the activation energy was 1.49±0.02 eV. The combination of a high activation energy and a weak P_O2 dependence was attributed to oxygen dissociation and adsorption rate-limiting steps for both types of electrodes. LSM–YSZ composite cathodes showed substantially lower overall interfacial resistance values than LSM, but exhibited an additional arc attributed to the resistance of YSZ grain boundaries within the LSM–YSZ. At 850°C and low P_O2, an additional arc was observed with size varying as (P_O2)^−0.80 for LSM and (P_O2)^−0.57 for LSM–YSZ, suggesting that diffusion had become an additional rate limiting step. Bilayer LSM/LSM–YSZ electrodes yielded results intermediate between LSM and LSM–YSZ. The results showed that most of the improvement in electrode performance was achieved for a LSM–YSZ layer only ≈2 μm thick. However, a decrease in the grain-boundary resistance would produce much better performance in thicker LSM–YSZ electrodes.     

A long-wavelength biolabeling reagent based on the oxonol fluorophore

A red fluorescent dye of the oxonol class, bis-[1-(carboxymethyl)barbituric acid-(5)]-pentamethinoxonol, has been synthesized and, in the form of the succinimidyl active ester, has been applied to antibody labeling for application to flow cytometry and to imaging of tissue sections. The new dye, named CMOX (for carboxymethyloxonol), shows maximum excitation at 583 nm and emission at 611 nm, with a quantum yield of 0.2 in aqueous buffer and methanol. Antibodies labeled with the new dye show favorable brightness, photostability, and low levels of nonspecific binding.