Formulation and polymerization of microemulsions containing a mixture of cationic and anionic monomers

A series of polyampholytes of sodium-2-acrylamido-2-methylpropanesulfonate (NaAMPS) and 2-(methacryloyloxy) ethyltrimethylammonium chloride (MADQUAT) has been synthesized by free radical polymerization in microemulsions. The optimization of the formulation was, by a selection procedure, based on the hydrophile-lipophile balance (HLB) of the nonionic surfactants and solubility parameters of the different components. Both ionomers play an important role in the formulation owing to their amphiphilic and electrolyte characters as confirmed by surface tension and turbidimetry experiments. These effects control the HLB and interfacial properties of the microemulsions. The results are semi-quantitatively interpreted from the cohesive energy ratio (CER) concept. The reaction products are stable inverse latexes consisting of high molecular weight copolymers entrapped in water droplets particles and dispersed in an isoparaffinic oil.     

Kinetics of photopolymerization of acrylamide in AOT reverse micelles

The kinetics of the photoinitiated polymerization of acrylamide in toluene/AOT/water inverse microemulsions have been examined for systems initiated by AIBN or a dye: triethanolamine redox reaction. The rates of polymerization were determined by dilatometry, the data being corrected for the effect of reaction exotermicity. For both the oil-soluble and the water-soluble initiating systems, the rate of polymerization was found to be proportional to the first power of the incident light intensity. For AIBN-initiated systems, the rate of polymerization was also found to be proportional to the first power of the initiator concentration. The molecular weights of the polymers produced were independent of the rates of polymerization and initiation. These results suggest that exclusively monoradical termination, involving a degradative chain transfer, is occurring in these systems     

Cationic crosslinking of solid dgeba resins with ytterbium(III) trifluoromethanesulfonate as initiator

Solid bisphenol-A epoxy resin of medium molecular mass was cured using a Lewis acid initiator (ytterbium(III) trifluoromethanesulfonate) in three different proportions (0.5, 1 and 2 phr). A kinetic study was performed in a differential scanning calorimeter. The complete kinetic triplet was determined (activation energy, pre-exponential factor, and integral function of the degree of conversion) for each system. A kinetic analysis was performed with an integral isoconversional procedure (free model), and the kinetic model was determined both with the Coats-Redfern method (the obtained isoconversional value being accepted as the effective activation energy) and through the compensation effect. All the systems followed the same isothermal curing model simulated from non-isothermal ones. The growth-of-nuclei Avrami kinetic model A_3/2 has been proposed as the polymerization kinetic model. The addition of initiator accelerated the reaction especially when 2 phr was added. 0.5 and 1 phr showed very few kinetic differences between them.     

Polymerization of acrylamide in nonionic microemulsions: Characterization of the microlatices and polymers formed

Free radical polymerization of acrylamide was carried out in nonionic microemulsions of water, an isoparaffinic oil, Isopar M and a blend of nonionic emulsifiers: a sorbitan sesquioleate and a polyoxyethylene sorbitol hexaoleate (HLB of the mixture: 9.3). The size and the stability of the latex particles formed after polymerization were studied as a function of monomer, emulsifier and electrolyte concentration. High emulsifier and high monomer contents favor obtaining high molecular weight polyacrylamides. It is shown that both the number of polymer chains contained in each latex particle and the size of the particles are essentially controlled by the acrylamide/emulsifier weight ratio.     

Etude par pression osmotique de polystyrenes lineaires et ramifies en solution: determination de leurs parametres thermodynamiques

Osmotic pressure measurements have been carried out with moderately concentrated solutions (v₂ ? 0·1 g/cm³) of linear and branched polystyrenes in good and poor solvents at various temperatures. The experimental study of star- and comb-shaped polystyrenes with high segment density leads to the following conclusions: (1) we confirm the lowering of the Flory “theta” temperature of these polymers with respect to that of linear homologues, already found by light scattering technique. (2) We show that, in the low concentration range, the polymer solvent interaction parameter % depends not only upon the polymer concentration but also is a function of the intramolecular volume fraction within the polymer coil: this effect tends to disappear at high concentrations.     

Fibrillar structure of self‐assemblies formed from heterocomplementary monomers linked through sextuple hydrogen‐bonding arrays

The nanostructure of the fibrillar supramolecular aggregates generated in decane solutions of homoditopic heterocomplementary monomers forming sextuple hydrogen‐bond‐mediated self‐assemblies was investigated by small‐angle neutron scattering and cryogenic‐temperature transmission electron microscopy. The persistence length (L_p) of the fibrillar aggregates was found to be ～18 nm, as inferred from combined measurements of the radius of gyration and of the contour length. The values of both the weight‐average molecular weight and the mass per unit length of the fibers suggest that the latter consist of few aggregated monomolecular wires. At T = 25 °C, the formation of branched aggregates occurs around the crossover concentration, C*, between the dilute and semidilute regimes, whereas the classical behavior of equilibrium polymers is observed at T = 65 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 103–115, 2007     

Investigation of the structure of polymeric microemulsions by proton magnetic resonance

The structure of polymeric microemulsions, viz. toluene/water/PS-PEO graft copolymer/2-propanol, has been studied by ¹H-NMR spectroscopy. Results show that at low water contents, the copolymer adopts a rather diffuse micellar structure in which the rotational mobility of the ethylene oxide units is little affected by the ternary solvent mixture. Above a critical water concentration (ca. 4%), a restriction in mobility of the ethylene oxide chains is observed which has been related to the formation of an inverse micellar structure with water solubilized within the particles. The study of the chemical shifts and linewidths of water protons indicates that initially most of the water is hydrogen bonded to the hydrophilic part of the copolymer, then is present in its free form in water aggregates. These results confirm previous data obtained by dialysis equilibrium experiments.     

Structural and dynamical properties of ribbonlike self-assemblies of a fluorinated cationic surfactant

The structural and dynamic properties of low ionic strength micellar solutions of the cationic surfactant perfluorooctylbutane trimethylammonium bromide have been investigated by cryo-TEM, small-angle neutron scattering, small-angle X-ray scattering, T-jump and rheological experiments. The surfactant molecules self-assemble into narrow ribbons with average dimensions on the order of 4 nm x 3 nm, either under salt-free conditions or in the presence of up to 30 mM KBr or NaF. Cryo-TEM also reveals in the salt-free systems the presence of networks of multiconnected micelles. Rheological experiments showed that these surfactant systems exhibit a strong shear-thickening effect even in the presence of up to 30 mM KBr. The T-jump response of the micellar solutions was found to be multiexponential. This observation rules out the presence of only linear micelles with an exponential length distribution and suggests more complex topologies of the micellar aggregates. The relaxation time associated with the predominant process in the T-jump relaxation is strongly correlated to the critical shear rate beyond which shear thickening occurs, thus indicating that this critical shear rate is controlled by the micellar kinetics.     

Vacuum moulding of a superplastic in two dimensions

A mathematical model is proposed for the process of vacuum superplasticforming. The model exploits the fact that in most industrialapplications the sheet aspect ratio (thickness/sheet width)is small. After an initial consideration of some of the moregeneral properties and the literature of superplastic materials,the elastic/plastic deformation of an internally-inflated thin-walledcylinder is examined. Plates of arbitrary geometry are thenconsidered. A quasisteady model in which the sheet moves througha sequence of steady states is developed. Some simplified closed-formsolutions are examined, but for general cases a system of nonlinearpartial differential equations must be solved numerically. Anefficient and accurate semi-explicit numerical scheme is proposedand a simplified stability analysis is presented; the methodis then used to compute properties of superplastic vacuum mouldedsheets in a number of practically motivated cases.