The Drazin inverses of products and differences of orthogonal projections

In this note, the Drazin inverses of products and differences of orthogonal projections on a Hilbert space are established.     

四阶方程两点边值问题Hermite有限元解的渐近展式与外推

1引言有限元解的渐近展式是提高微分方程数值解精度的重要工具,比如亏量校正和外推就是建立在有限元解的渐近展式的基础之上．许多作者对此进行了大量的研究(见[1]-[4]),特别是文[1],提出了在研究有限元解的渐近展式中十分有用的能量嵌入技巧．本文利用能量嵌入定理得到了四阶方程两点边值问题Hermite有限元解及其二阶平均导数的渐近展式,进一步我们还讨论了它们的Richardson外推公式．考虑四阶方程两点边值问题     

LiNbO3∶Cr∶Cu晶体吸收特性及非挥发全息存储研究

研究了LiNbO3∶Cr∶Cu晶体的吸收特性,发现LiNbO3∶Cr∶Cu（含0.14 wt.% Cr2O3 和 0.011 wt.% CuO）晶体存在两个明显的吸收峰,中心波长分别位于480 nm和660 nm; 随着Cr的含量逐渐减小,Cu的含量逐渐增大,短波段不存在明显吸收峰,掺Cr的含量越大,中心波长在660 nm处的吸收越大；633 nm红光虽然位于中心波长为660 nm的吸收峰内,但它无助于光折变过程.分别采用390 nm紫外光和488 nm蓝光作为敏化光,514 nm绿光作为记录光的记录方案,实现了非挥发全息记录,掺入适量的Cr( 比如NCr=2.795×1025 m－3,NCr/ NCu=1)有助于全息记录性能的提高.     

磁性纳米颗粒膜的微磁学模拟

用微磁学方法对磁性纳米颗粒膜的磁特性进行了模拟，采用的模型是由122个磁性纳米颗粒组成的面心立方(fcc)结构体系.结果表明：在该体系中，偶极相互作用对体系的静态磁结构的影响显著，而交换相互作用的影响表现不明显.在此基础上，本文还采用有效媒质理论计算分析了磁性合金颗粒不同体积比时颗粒膜的磁谱和表征电磁参量发生显著变化的逾渗现象和逾渗阈值.并完成了对高磁损耗磁性纳米颗粒膜的材料设计. 关键词： 微磁学 纳米颗粒膜 逾渗阈值 磁导率 材料设计     

准二维无序系统的电子结构

对形如N_t×N_l型准二维无序系统，只考虑格点之间的最近邻跳跃积分，采用特殊的格点编号方案，在单电子近似下，系统的哈密顿量可表示为简明对称矩阵，借助豪斯荷尔德变换将其约化为对称三对角矩阵，再利用负本征值理论及传输矩阵等方法,对系统态密度、局域长度及电导等电子结构特性进行数值计算. 重点研究了准一维四平行链和五平行链无序系统， 将结果与一维单链、准一维双链及三链系统进行对比，发现随维度的增加，系统的能带有所展宽，能态密度分布发生很大的变化，其峰值数量呈偶数规律增加. 并且在能带中心处存在有局域长度大于系统大小的扩展态，处于这些态下的系统具有较大电导. 从单链到多链，相当于扩大了系统的关联范围，使系统出现了类似非对角长程关联的行为. 关键词： 准二维无序系统 态密度 局域长度 电导     

Gd3+对Ca0.8Zn0.2TiO3:Pr3+红色发光材料的敏化作用

采用溶胶-凝胶法在较低温度下合成了红色发光材料Ca0.8Zn0.2TiO3:0.002Pr3 ,xGd3 .金属离子预先溶解含有柠檬酸的乙二醇溶液中.XRD表明在800℃灼烧2h形成了钛酸盐的晶体.荧光检测结果表明所合成样品的特征激发峰为330nm、特征发射峰为614nm,分别对应于O(2p)→Ti(3d)带间跃迁和Pr3 的1D2→3H4的特征发射.样品的发光强度随x的不同而不同,发光强度增强了29%-69%.当x＝0.0005时,即nPr3 :nGd3 ＝4∶1时样品的红色发光强度最强,发光强度增强了69%.     

Large-scale magnetic structures of coronal mass ejections

Based on the studies on the source regions of a group of coronal mass ejections, we have identified two types of large-scale magnetic structures, and suggested that they are intrinsic components of solar magnetism, their destabilization, expansion, and eruption into the interplanetary space are the basic physical processes which lead to the coronal mass ejections. These two types of large-scale structures are giant magnetic loops connecting the two active belts on the opposite hemispheres of the Sun, and the giant filaments (filament channels) and their related magnetic structures. The latter often appear as two parallel rows of sunspots and plage fields, which align side by side in the full disk daily and synoptic magnetograms. The magnetic neutral lines of these large-scale structures are usually longer than 50 heliographic degrees. We name this type of structure “super A configuration”. Sometimes, they are shown as very long filaments and related large-scale magnetic fields. As these magnetic structures are of very large scale, they extend to a great altitude into the corona, they are not easily recognized in magnetic field observations which are usually aimed at solar flare studies. To identify these large-scale structures becomes a key to understanding and predicting coronal mass ejections.     

Lot Streaming in a Two-stage Flow Shop with Set-up,Processing and Removal Times Separated

This paper considers the job (lot) scheduling problem for two-stage flow shops in which the movement of transfer batches (sublots) from the first stage to the next are allowed. Set-up, processing and removal times are considered as separable and independent of the order in which jobs are processed at any of two stages. An optimal transfer batch sizing and scheduling algorithm which has an objective of minimizing the maximum flow time (makespan) is developed and demonstrated by a numerical example.