傅里叶变换红外光谱在胃癌淋巴结转移诊断中的应用研究

观察傅里叶变换红外光谱技术无创、原位、快速诊断胃癌淋巴结转移的可行性。联合使用衰减全反射探头及傅里叶变换红外光谱仪测量新鲜离体胃周淋巴结红外光谱,发现每条光谱在吸收波长3 000～1 000 cm-1之间循序出现13条谱带,依据病理检测结果将淋巴结分为转移组及非转移组,比较两组淋巴结红外光谱的峰位和相对峰强等指标结果,最后进行标准统计学分析。36例胃癌患者,共检测淋巴结720枚,其中转移性淋巴结180枚,未转移540枚;与非转移淋巴结相比,转移淋巴结红外光谱有如下特征：(1)与核酸相关的峰强比I_{1 240}/I_{1 460}(p=0.015)和I_{1 080}/I_{1 460}(p=0.034)显著升高,提示转移淋巴结细胞的核酸含量增多;(2)与蛋白相关的I_{1 640}/I_{1 460}(p=0.001)和I_{1 546}/I_{1 460}(p=0.027)峰强比值升高,表明转移淋巴结组织的蛋白质含量明显升高;(3)与脂类相关的I_{2 855}/I_{1 460}和I_{1 740}/I_{1 460}显著降低(p＜0.001),提示癌组织脂类含量相对减少;(4)I_{1 160}/I_{1 460}(p=0.023)显著降低,表明恶性细胞糖类物质的减少。研究结果显示,傅里叶变换红外光谱分析技术有望成为术中原位、在体和快速诊断胃癌淋巴结转移的新方法。     

花生种子品质的可见-近红外光谱分析

利用600～1 100 nm波段研究花生品种的可见-近红外反射光谱,对选取的三种具有代表性的花生种子进行实验。使用近红外光纤光谱仪采集光谱数据,对原始光谱进行小波分析以提取光谱特征,再用主成分分析方法进行聚类分析,最后把每一个样品的前4个主成分得分作为识别模型的输入,品种类别作为模型的输出,以马氏距离作为判别函数,建立了线性判别分析模型。对于每个品种的50个样品,随机挑选30个样本作为训练集,剩余的20个样本作为预测集。该识别模型对3个花生品种的平均正确识别率为95%。表明该方法能有效的识别花生种子,得到较好的分类效果,为花生种子品质的区分和鉴别提供了一种新方法。     

基于光谱分析的重载车辆变速箱可靠性评估方法研究

润滑油光谱分析是变速箱磨损状态监测的重要手段。以某重载车辆变速箱台架试验中润滑油原子发射光谱分析得到的元素成分含量检测数据为基础,通过相关性分析和磨损机理分析确定了能够反映整机磨损状态和失效特点的金属元素,并对补油、换油后的光谱检测数据进行了修正,将变速箱试验过程中特征金属元素的含量随试验时间的变化规律表示为线性函数的形式。然后,综合考虑检测数据的时序规律与离散性,利用不同时刻光谱检测数据的正态分布均值和标准差进行变速箱可靠性评估,进一步讨论了失效阈值对可靠性评估结果的影响。研究表明,重载车辆变速箱润滑油中的Cu元素浓度与其他金属元素浓度的相关性较高、绝对值较大,既能够反映变速箱整体磨损状态,又便于检测,利用多个试验样本的润滑油Cu元素浓度光谱检测时序数据,可以对重载车辆变速箱进行可靠性评估;若失效阈值取定值,则失效阈值越大,同一时刻变速箱的可靠度越高;若失效阈值取随机分布,则失效阈值的离散度越大,可靠度随时间延长而降低的趋势越缓慢。当可靠度R大于0.9时,失效阈值的均值对可靠性评估结果的影响十分显著,同一时刻变速箱的可靠度随失效阈值标准差的增大而降低。将光谱分析与概率统计学结合进行变速箱可靠性评估方法研究,扩展了光谱分析技术的应用范围,具有创新性。     

用于空间激光通信的InGaAsP 激光二极管辐射损伤研究(英文)

对1:55 μm波长DFB 结构的InGaAsP 多量子阱激光二极管开展电子和60Co- 射线辐照试验。试验结果表明,激光二极管的斜度效率主要受带电粒子沉积的电离总剂量影响,而阈值电流和光功率主要受位移损伤剂量的影响。利用位移损伤剂量方法评价激光二极管的辐射损伤特征,并且预测其在空间辐射环境中的光功率衰退情况。模拟计算结果表明,MEO轨道辐射环境对激光二极管光功率辐射损伤远大于GEO轨道的影响,这主要是由于MEO轨道辐射环境的高能电子通量密度远大于GEO轨道的通量密度。The 1.55 μm InGaAsP multi-quantum-well laser diodes with distributed feedback structures were irradiated by electrons and 60Co- rays. The experimental results show the slope efficiency of laser diode is mostly affected by the total ionizing dose produced by charging particles, and the threshold current and the optical power mainly by displacement damage dose. The displacement damage dose methodology was employed to evaluate radiation damage of the laser diodes, and to predict the power degradations of these diodes in space. The calculated results indicate that the optical powers of the diodes will have more serious degradation for medium Earth orbit than for geosynchronous Earth orbit,due to higher fluence density of high energy electrons in GEO orbits.     

A data transmission method for particle physics experiments based on Ethernet physical layer

Due to its advantages of universality, flexibility and high performance, fast Ethernet is widely used in readout system design for modern particle physics experiments. However, Ethernet is usually used together with the TCP/IP protocol stack, which makes it difficult to implement readout systems because designers have to use the operating system to process this protocol. Furthermore, TCP/IP degrades the transmission efficiency and real-time performance. To maximize the performance of Ethernet in physics experiment applications, a data readout method based on the physical layer(PHY) is proposed. In this method, TCP/IP is replaced with a customized and simple protocol, which makes it easier to implement. On each readout module, data from the front-end electronics is first fed into an FPGA for protocol processing and then sent out to a PHY chip controlled by this FPGA for transmission.This kind of data path is fully implemented by hardware. From the side of the data acquisition system(DAQ),however, the absence of a standard protocol causes problems for the network related applications. To solve this problem, in the operating system kernel space, data received by the network interface card is redirected from the traditional flow to a specified memory space by a customized program. This memory space can easily be accessed by applications in user space. For the purpose of verification, a prototype system has been designed and implemented.Preliminary test results show that this method can meet the requirements of data transmission from the readout module to the DAQ with an efficient and simple manner.     

TOT measurement implemented in FPGA TDC

Time measurement plays a crucial role for the purpose of particle identification in high energy physics experiments. With increasingly demanding physics goals and the development of electronics, modern time measurement systems need to meet the requirement of excellent resolution specification as well as high integrity. Based on Field Programmable Gate Arrays(FPGAs), FPGA time-to-digital converters(TDCs) have become one of the most mature and prominent time measurement methods in recent years. For correcting the time-walk effect caused by leading timing, a time-over-threshold(TOT) measurement should be added to the FPGA TDC. TOT can be obtained by measuring the interval between the signal leading and trailing edges. Unfortunately, a traditional TDC can recognize only one kind of signal edge, the leading or the trailing. Generally, to measure the interval, two TDC channels need to be used at the same time, one for leading, the other for trailing. However, this method unavoidably increases the amount of FPGA resources used and reduces the TDC's integrity.This paper presents one method of TOT measurement implemented in a Xilinx Virtex-5 FPGA. In this method,TOT measurement can be achieved using only one TDC input channel. The consumed resources and time resolution can both be guaranteed. Testing shows that this TDC can achieve resolution better than 15 ps for leading edge measurement and 37 ps for TOT measurement. Furthermore, the TDC measurement dead time is about two clock cycles, which makes it good for applications with higher physics event rates.     

内蒙古东升庙白垩系红层的近红外光谱分析

在内蒙古东升庙矿区西部采取白垩系红层岩心及地表风化土壤样,用近红外光谱分析技术对各个样品进行测试分析。结果表明,近红外光谱技术能通过矿物中各基团的特征吸收峰快速鉴别出矿物,东升庙矿区西部白垩系红层为泥质胶结主要由石英、长石、蒙脱石、伊利石、绿泥石、白云母等组成,其矿物组成主要受到上游物源区影响;其崩解主要为蒙脱石等粘土矿物吸水膨胀,失水收缩不均匀,使原有裂隙扩大并产生新的裂隙,导致强度降低,发生崩解;根据其粘土矿物的组合推测其风化过程中气候以寒冷干燥为主,风化过程主要为物理风化。研究结果一方面可以完善该矿区地质特征,另一方面表明在矿物光谱学的基础上,近红外光谱分析技术可以有效地分析土壤和岩石的矿物成分,从而论证了近红外光谱分析技术应用于土壤、岩石矿物的的快速分析可行性,表明了其在地质研究中的可行性,为以后的土壤、岩石研究提供新思路。     

STZ诱导大鼠1型糖尿病进行性脑萎缩的磁共振成像及组织化学研究

1型糖尿病(T1DM)是一种慢性代谢疾病,主要表现为胰岛素分泌量较正常情况下降,会对人体的多个器官和系统造成持续性的损伤．关于糖尿病的横向研究发现糖尿病患者相比于正常人存在着显著的脑萎缩,但关于糖尿病引起的脑萎缩随时间发生进行性改变的研究比较少见．实验采用腹腔注射链脲佐菌素(STZ)来诱导建立大鼠的1型糖尿病模型,运用磁共振成像(MRI)的方法对萎缩的脑区进行定位并在造模后12周和20周两个时间点对脑萎缩的程度进行对比分析,然后运用组织化学染色的方法观察在MRI上出现进行性萎缩的脑区中的神经元所发生的病理改变．MRI的结果表明：STZ诱导的T1DM大鼠相比于正常对照组大鼠出现了显著性的全脑体积、灰质体积和白质体积的萎缩,并且在多个白质脑区和灰质脑区均出现了萎缩程度随着病程的延长而逐渐加重．组织化学染色的结果发现,STZ诱导的T1DM大鼠相对于正常对照组大鼠在体感皮层、运动皮层和海马CA3区,均出现明显的神经元萎缩现象．     

酚化合物对胰岛素淀粉样纤维化的抑制作用

采用牛胰岛素作为模型多肽分子, 对几种结构相近的简单多酚的抗多肽淀粉样纤维化作用进行了研究. 结果表明, 邻苯二酚和对苯二酚对胰岛素纤维化具有抑制作用, 并通过形成醌中间体对多肽链进行修饰, 与对苯醌作用类似; 而苯酚和间二苯酚在相同条件下, 既不能修饰多肽也无抑制纤维化作用. 在无氧条件下, 邻苯二酚和对苯二酚对胰岛素纤维化的抑制作用明显降低, 说明酚化合物经氧化形成的醌中间体是其抗胰岛素纤维化的主要活性结构.     

β-硝基苯乙烯衍生物与二溴海因高度区域选择性氨溴加成反应

以β-硝基苯乙烯衍生物为底物, 二溴海因为氮源/卤素源, 乙腈作溶剂, 建立了碳碳双键上高度区域选择性氨溴加成反应新体系. β-硝基苯乙烯衍生物与二溴海因在室温无水碳酸钠催化下反应, 可高收率获得邻位氨溴加成产物, 最高收率达97%; β-甲基-β-硝基苯乙烯衍生物在氢氧化钾催化下回流反应, 也可高收率得到邻位氨溴加成产物, 最高收率达95%. 实验结果表明, 对于硝基苯乙烯衍生物, 当苯环4-位具有强供电子基团如CH₃O时, 可以得到单一的α-氨基-β-溴加成产物, 但其收率相对较低; 当硝基苯乙烯衍生物的苯环4-位有强吸电子基团如NO₂时, 反应收率则很高. 这一实验结果证明β-硝基苯乙烯衍生物(缺电子烯烃)与二溴海因的氨溴加成反应具有亲核加成的特征. 本文共考察了20种不同结构的β-硝基苯乙烯衍生物的氨溴加成反应情况, 其产物结构经核磁共振波谱及质谱分析确证, 并提出了可能的反应机理.