Cyclopentadiene annulated polycyclic aromatic hydrocarbons: investigations of electron affinities

The adiabatic electron affinities of cyclopentadiene and 10 associated benzannelated derivatives have been predicted with both density functional and Hartree-Fock theory. These systems can also be regarded as benzenoid polycyclic aromatic hydrocarbons (PAHs) augmented with five-membered rings. Like the PAHs, the electron affinities of the present systems generally increase with the number of rings. To unequivocally bind an electron, cyclopentadiene must have at least two conventionally fused benzene rings. 1H-Benz[f]indene, a naphthalene-annulated cyclopentadiene, is predicted to have a zero-point energy corrected adiabatic electron affinity of 0.13 eV. Since the experimental E(A) of naphthalene is negative (-0.19 eV), the five-membered ring appendage contributes to the stability of the naphthalene-derived 1H-benz[f]indene radical anion significantly. The key to binding the electron is a contiguous sequence of fused benzenes, since fluorene, the isomer of 1H-benz[f]indene, with separated six-membered rings, has an electron affinity of -0.07 eV. Each additional benzene ring in the sequence fused to cyclopentadiene increases the electron affinity by 0.15-0.65 eV: the most reliable predictions are cyclopentadiene (-0.63 eV), indene (-0.49 eV), fluorene (-0.07 eV), 1H-benz[f]indene (0.13 eV), 1,2-benzofluorene (0.25 eV), 2,3-benzofluorene (0.26 eV), 12H-dibenzo[b,h]fluorene (0.65 eV), 13H-indeno[1,2-b]anthracene (0.82 eV), and 1H-cyclopenta[b]naphthacene (1.10 eV). In contrast, if the six-membered ring-fusion is across the C(2)-C(3) cyclopentadiene single bond, only a single benzene is needed to bind an electron. The theoretical electron affinity of the resulting molecule, isoindene, is 0.49 eV, and this increases to 1.22 eV for 2H-benz[f]indene. The degree of aromaticity is responsible for this behavior. While the radical anions are stabilized by conjugation, which increases with the size of the system, the regular indenes, like PAHs in general, suffer from the loss of aromatic stabilization in forming their radical anions. While indene is 21 kcal mol(-1) more stable than isoindene, the corresponding radical anion isomers have almost the same energy. Nucleus-independent chemical shift calculations show that the highly aromatic molecules lose almost all aromaticity when an extra electron is present. The radical anions of cyclopentadiene and all of its annulated derivatives have remarkably low C-H bond dissociation energies (only 18-34 kcal mol(-1) for the mono-, bi-, and tricyclics considered). Hydrogen atom loss leads to the restoration of aromaticity in the highly stabilized cyclopentadienyl anion congeners.     

Are 1,5-disubstituted semibullvalenes that have C2v equilibrium geometries necessarily bishomoaromatic?

Unrestricted density functional theory (UB3LYP), CASSCF, and CASPT2 calculations have been employed to compute the relative energies of the C(s) and C(2v) geometries of several 1,5-disubstituted semibullvalenes. Substitution at these positions with R = F, -CH(2)-, or -O- affords semibullvalenes that are predicted to have C(2v) equilibrium geometries. Calculated singlet-triplet energy splittings and the energies of isodesmic reactions are used to assess the amount of bishomoaromatic character at these geometries. The results of these calculations show that employing strain to destabilize the C(s) geometries of semibullvalenes can lead to a significant decrease in the amount of bishomoaromatic stabilization of the C(2v) geometries, due to reduced through-space interaction between the two allyl groups. However, the C(2v) equilibrium geometries of the 1,5-disubstituted semibullvalenes with R = F and -RR- = -O- do benefit from stabilizing through-bond interactions between the two allyl groups. These interactions involve mixing of the bisallyl HOMO with the low-lying C-F or C-O sigma orbital combinations of the same symmetry. In contrast, for -RR- = -CH(2)-, through-bond interactions destabilize the bisallyl HOMO and are predicted to make the ground state of this semibullvalene a triplet.     

Electron spin echo envelope modulation from trapped electrons in a glassy medium

An amplitude modulation of the electron spin echo envelope has been observed for radiation-produced trapped electrons in 10 M NaOD/D₂O at 77°K but not in 10 M N₂OH/H₂O. The modulation has been simulated theoretically by generalizing the single crystal model of Rowan et al. to disordered systems. The modulation has been interpreted as due to dipolar interactions with deuterons in molecules of the second solvation shell around the trapped electrons.     

Identification of diethylene glycol monobutyl ether as a source of contamination in an ion trap mass spectrometer

Tandem liquid chromatography-mass spectrometry coupled to online radioactive material detection (LC/RAM/MS/MS) is a technique that is used routinely for in vivo and in vitro drug metabolism studies and allows for a simultaneous correlation between radiochemical peaks and mass spectral data. The compound diethylene glycol monobutyl ether (DGBE), a component of a commercially available scintillation cocktail for RAM analysis, was identified as a source of overwhelming chemical noise in a mass spectrometer which was used in an LC/RAM/MS/MS configuration. In this report, we describe the identification of DGBE as the source of the chemical noise and the methods that were used to minimize the exposure of the mass spectrometer to volatile components of the scintillation cocktail.     

Solid products from thermal decomposition of polyethylene terephthalate: Investigation by CP/MAS 13C-NMR and fourier transform-IR spectroscopy

The solid reaction products from pyrolysis of polyethylene terephthalate in the presence and absence of red phosphorus were characterized by CP/MAS ¹³C-NMR, FR-IR, and MAS ³¹P-NMR spectroscopy. Over the temperature range of 300–400°C, polyethylene terephthalate was converted in a sealed vial to a highly crosslinked polymer of terephthalic acid. Pyrolysis in the presence of red phosphorus, which functions as a flame retardant by increasing the amount of char, yielded an intractible polyaromatic phosphate ester. After thermal cleavage of polyethylene terephthalate with formation of free carboxyl and vinyl ester groups, there are two competing reaction pathways. The smaller molecular weight fragments may enter the vapor phase where they undergo further degradation primarily to CO₂, CO, and acetaldehyde, as described by others. However, if volatilization of the oligomeric fragments is inhibited, an alternate reaction pathway gives rise to the formation of highly crosslinked char. Red phosphorus decreases the volatility of the oligomeric fragments by converting them to phosphates and thereby enhances char formation.     

On the C-16 configuration of sitsirikine

The indole alkaloid sitsirikine has been synthesised by a biomimetic conversion of strictosidine and its C-16 configuration established as R by cyclisation to a 16,17-dihydroheteroyohimbine.     

Solid-state synthesis of a conducting polythiophene via an unprecedented heterocyclic coupling reaction

Prolonged storage ( approximately 2 years) or gentle heating (50-80 degrees C) of crystalline 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) affords a highly conducting, bromine-doped poly(3,4-ethylenedioxythiophene) (PEDOT), as confirmed by solid-state NMR, FTIR, CV, and vis-NIR spectroscopies. The novel solid-state polymerization (SSP) does not occur for 2,5-dichloro-3,4-ethylenedioxythiophene (DCEDOT), and requires a much higher temperature (>130 degrees C) for 2,5-diiodo-3,4-ethylenedioxythiophene (DIEDOT). X-ray structural analysis of the above dihalothiophenes reveals short Hal.Hal distances between adjacent molecules in DBEDOT and DIEDOT, but not in DCEDOT. The polymerization may also occur in the melt but is significantly slower and leads to poorly conductive material. Detailed studies of the reaction were performed using ESR, DSC, microscopy, and gravimetric analyses. SSP starts on crystal defect sites; it is exothermic by 14 kcal/mol and requires activation energy of approximately 26 kcal/mol (for DBEDOT). The temperature dependence of the conductivity of SSP-PEDOT (sigma(rt) = 20-80 S/cm) reveals a slight thermal activation. It can be further increased by a factor of 2 by doping with iodine. Using this approach, thin films of PEDOT with conductivity as high as 20 S/cm were fabricated on insulating flexible plastic surfaces.     

Mechanistic evaluation of the halocyclization of 4-penten-1-ol by some Bis(2-substituted pyridine) and Bis(2,6-disubstituted pyridine)bromonium triflates

The halocyclization reaction of 4-penten-1-ol mediated by various bis(2-substituted pyridine) and (2,6- disubstituted pyridine)bromonium triflates (P(2)Br(+)OTf(-)) was investigated to determine the influence of the substituents on the mechanism of reaction. In all cases, the reaction proceeds via a two-step process where the starting P(2)Br(+) reversibly dissociates to a reactive monosubstituted PBr(+), which then is captured by 4-penten-1-ol to form halocyclized product (2-bromomethyltetrahydrofuran). The dissociation rate constant of P(2)Br(+) (k(d)) is sensitive to the steric bulk at the 2- and 6-positions, and in the case of the 2, 6-dicyclohexylpyridine or 2,6-dicyclopentylpyridine, the P(2)Br(+) species are too unstable to isolate. The partitioning ratio of the reactive intermediate (PBr(+)) between reversal and product formation (k(-)(d)/k(2)) is not particularly sensitive to the nature of the pyridine, the limiting values being 3-7 except in the case of bis(2(-)-menthylpyridine)bromonium triflate where the k(-)(d)/k(2) ratio is approximately 80. The reaction of 4-penten-1-ol and its OD isotopomer with bis(lutidine)bromonium triflate was investigated to determine the deuterium kinetic isotope effect (dkie) on the bromocyclization reaction. The (k(-)(d)/k(2))(H/D) ratio is 1.0, indicating that the rate-limiting step for the bromocyclization is probably formation of a PBr(+)-4-penten-1-ol complex which does not involve substantial changes in the bonding of the OH. The cyclization of 4-penten-1-ol and 4-pentenoic acid mediated by bis(2(-)-menthylpyridine)bromonium triflate produces an enantiomeric excess in the cyclized products of only 2.4% and 4.8% respectively.