Structural characterisation of the perovskite series Sr0.9−xCaxCe0.1MnO3: Influence of the Jahn-Teller effect

Fifteen perovskite-type compounds Sr_0.9−xCa_xCe_0.1MnO₃, x=0-0.9 in steps as fine as 0.05, have been synthesised by solid state methods, and the room temperature structures characterised using X-ray synchrotron powder diffraction. At low Ca contents (x?0.45) the structures are tetragonal in space group I4/mcm and at high Ca contents (x?0.55) the compounds are orthorhombic in space group Pbnm. At room temperature these two phases co-exist in the compound with x=0.5. XANES measurements show the Ce to be present as Ce⁴⁺ in all the oxides. High temperature structures are reported for selected members.     

An update on the middle levels problem

The middle levels problem is to find a Hamilton cycle in the middle levels, M_2k+1, of the Hasse diagram of (the partially-ordered set of subsets of a 2k+1-element set ordered by inclusion). Previously, the best known, from [I. Shields, C.D. Savage, A Hamilton path heuristic with applications to the middle two levels problem, in: Proceedings of the Thirtieth Southeastern International Conference on Combinatorics, Graph Theory, and Computing (Boca Raton, FL, 1999), vol. 140, 1999], was that M_2k+1 is Hamiltonian for all positive k through k=15. In this note we announce that M₃₃ and M₃₅ have Hamilton cycles. The result was achieved by an algorithmic improvement that made it possible to find a Hamilton path in a reduced graph (of complementary necklace pairs) having 129,644,790 vertices, using a 64-bit personal computer.     

Dinuclear cyano-bridged CoIII-FeII complexes as precursors for molecular mixed-valence complexes of higher nuclearity

The preparation and characterization of a series of trinuclear mixed-valence cyano-bridged Co(III)-Fe(II)-Co(III) compounds derived from known dinuclear [[L(n)Co(III)(mu-NC)]Fe(II)(CN)(5)](-) complexes (L(n)() = N(5) or N(3)S(2) n-membered pendant amine macrocycle) are presented. All of the new trinuclear complexes were fully characterized spectroscopically (UV-vis, IR, and (13)C NMR). Complexes exhibiting a trans and cis arrangement of the Co-Fe-Co units around the [Fe(CN)(6)](4-) center are described (i.e., cis/trans-[{L(n)Co(III)(mu-NC)](2)Fe(II)(CN)(4)](2+)), and some of their structures are determined by X-ray crystallography. Electrochemical experiments revealed an expected anodic shift of the Fe(III/II) redox potential upon addition of a tripositively charged [Co(III)L(n)] moiety. The Co(III/II) redox potentials do not change greatly from the di- to the trinuclear complex, but rather behave in a fully independent and noncooperative way. In this respect, the energies and extinction coefficients of the MMCT bands agree with the formal existence of two mixed-valence Fe(II)-CN-Co(III) units per molecule. Solvatochromic experiments also indicated that the MMCT band of these compounds behaves as expected for a class II mixed-valence complex. Nevertheless, its extinction coefficient is dramatically increased upon increasing the solvent donor number.     

Dimethylammonium trichlorocuprate(II): structural transition, low-temperature crystal structure, and unusual two-magnetic chain structure dictated by nonbonding chloride-chloride contacts

Catena(dimethylammonium-bis(mu2-chloro)-chlorocuprate), (CH3)2NH2CuCl3, forms chains of Cu2Cl6(2-) bifold dimers linked along the structural chain axis by terminal chlorides forming long semicoordinate bonds to adjacent dimers. The structural chains are separated by dimethylammonium ions that hydrogen bond to chloride ions of the dimers. A structural phase transition below room temperature removes disorder in the hydrogen bonding, leaving adjacent dimers along the chain structurally and magnetically inequivalent, with alternating ferromagnetic and antiferromagnetic pairs. The coupled dimers are magnetically isolated from each other along the structural chain axis by the long semicoordinate Cu-Cl bond. However, the dimers couple to like counterparts on adjacent chains via nonbonding Cl...Cl contacts. The result is two independent magnetic chains, one an alternating antiferromagnetic chain and the other an antiferromagnetic chain of ferromagnetically coupled copper dimers, which run perpendicular to the structural chains. This magnetostructural analysis is used to fit unusual low-temperature (1.6 K) magnetization vs field data that display a two-step saturation. The structural phase transition is identified with neutron scattering and capacitance measurements, and the X-ray crystal structures are determined at room temperature and 84 K. The results appear to resolve long-standing confusion about the origins of the magnetic behavior of this compound and provide a compelling example of the importance of two-halide magnetic exchange.     

The nature of halogen...halogen synthons: crystallographic and theoretical studies

A study of the halogen...halogen contacts in organic compounds using ab initio calculations and the results of previously reported crystallographic studies show that these interactions are controlled by electrostatics. These contacts can be represented by the geometric parameters of the C--X1...X2--C moieties (where theta1=C--X1...X2 and theta2=X1...X2--C; ri=X1...X2 distance). The distributions of the contacts within the sum of van der Waals radii (rvdW) versus thetai (theta1=theta2) show a maximum at theta approximately 150 degrees for X=Cl, Br, and I. This maximum is not seen in the distribution of F...F contacts. These results are in good agreement with our ab initio calculations. The theoretical results show that the position of the maximum depends on three factors: 1) The type of halogen atom, 2) the hybridization of the ipso carbon atom, and 3) the nature of the other atoms that are bonded to the ipso carbon atom apart from the halogen atom. Calculations show that the strength of these contacts decreases in the following order: I...I>Br...Br>Cl...Cl. Their relative strengths decrease as a function of the hybridization of the ipso carbon atom in the following order: sp2>sp>sp3. Attaching an electronegative atom to the carbon atom strengthens the halogen...halogen contacts. An electrostatic model is proposed based on two assumptions: 1) The presence of a positive electrostatic end cap on the halogen atom (except for fluorine) and 2) the electronic charge is anisotropically distributed around the halogen atom.     

Ligand-promoted solvent-dependent ionization and conformational equilibria of Re(CO)3Br[CH2(S-tim)2] (tim = 1-methylthioimidazolyl). Crystal structures of Re(CO)3Br[CH2(S-tim)2] and {Re(CO)3(CH3CN)[CH2(S-tim)2]}(PF6)

The compounds Re(CO)3Br[CH2(S-tim)2] (1) and {Re(CO)3(CH3CN)[CH2(S-tim)2]}(PF6) (2), where tim is 1-methylthioimidazolyl, were prepared in high yields and characterized both in the solid state and in solution. The solid-state structures show that the ligand acts in a chelating binding mode where the eight-member chelate ring adopts twist-boat conformations in both compounds. A comparison of both solid-state IR data for CO stretching frequencies and the solution-phase voltammetric measurements for the Re(1+/2+) couples between 1, 2, and related N,N-chelates of the rhenium tricarbonyl moiety indicate that the CH2(S-tim)2 ligand is a stronger donor than even the ubiquitous dipyridyl ligands. A combination of NMR spectroscopic studies and voltammetric studies revealed that compound 1 undergoes spontaneous ionization to form {Re(CO)3(CH3CN)[CH2(S-tim)2]+}(Br-) in acetonitrile. Ionization does not occur in solvents such as CH2Cl2 or acetone that are less polar and Lewis basic (less coordinating). The equilibrium constant at 293 K for the ionization of 1 in CH3CN is 4.3 x 10(-3). The eight-member chelate rings in each 1 and 2 were found to be conformationally flexible in all solvents, and boat-chair conformers could be identified. Variable-temperature NMR spectroscopic studies were used to elucidate the various kinetic and thermodynamic parameters associated with the energetically accessible twist-boat to twist-boat and twist-boat to boat-chair interconversions.     

A highly efficient, recyclable catalyst for C-C coupling reactions in ionic liquids: pyrazolyl-functionalized N-heterocyclic carbene complex of palladium(II)

[reaction: see text] A hemilabile pyrazolyl-functionalized N-heterocyclic carbene complex of palladium(II) has been synthesized. It is an excellent catalyst for Heck and Suzuki cross-coupling reactions in ionic liquids.     

The influence of chemical composition on models of Type Ia supernovae

Type Ia supernovae are bright stellar explosions distinguished by standardizable light curves that allow for their use as distance indicators for cosmological studies. Despite the highly successful use of these events in this capacity, many fundamental questions remain. Contemporary research investigates how properties of the progenitor system that follow from the host galaxy such as composition and age influence the brightness of an event with the goal of better understanding and assessing the intrinsic scatter in the brightness. We provide an overview of these supernovae and proposed progenitor systems, all of which involve one or more compact stars known as white dwarfs. We describe contemporary research investigating how the composition and structure of the progenitor white dwarf systematically influences the explosion outcome assuming the progenitor is a single white dwarf that has gained mass from a companion. We present results illustrating some of these systematic effects from our research.     

The effects of Coulomb friction on the performance of centrifugal pendulum vibration absorbers

We investigate analytically and experimentally the effects of Coulomb friction on the performance of centrifugal pendulum vibration absorbers (CPVAs), which are used to reduce torsional vibrations in rotating machinery. The analysis is based on perturbation methods applied to the nonlinear equations of motion for a rotor subjected to an engine order applied torque and equipped with a circular path CPVA with viscous and Coulomb damping. The experimental work is based on quantifying parameters for the damping model using free vibration measurements with a viscous and Coulomb damping identification scheme that is enhanced to better handle measurement noise, and running tests for steady-state operation under a range of loading conditions. The level of Coulomb damping is varied by adjusting the friction of the absorber connection bearing. Good agreement is found between the analytical predictions and the experimental data. It is shown that the absorber sticks up to a level of excitation that allows it to release, after which the Coulomb damping acts in the expected manner, resulting in lowered response amplitudes. The results obtained are of general use in assessing absorber performance when dry friction is present in absorber suspensions.     

Photocatalytic properties of Ta-doped TiO2

Ionics - This work reports the effect of tantalum (0.1–1 at.% Ta) on the photocatalytic performance of TiO2 annealed at 1373 and 1673 K in air. It was shown that addition of...