Determination of Hg and Pb in compact fluorescent lamp by slurry sampling inductively coupled plasma optical emission spectrometry

Mercury and lead were determined in an extraction solution applied to compact fluorescent lamps by axial view inductively coupled plasma optical emission spectrometry (ICP OES). The solution contained 50% v/v HNO₃ and 10% v/v H₂O₂. The compact fluorescent lamps were treated by removing the socket and breaking the rest of the lamp inside the solution, followed by placing the mixture in an ultrasonic bath for 1 h. The mixture was filtrated in a coarse paper filter and the resulting extraction slurry was analyzed. The determination of Pb in the slurry required calibration by the analyte addition technique, while for Hg, external calibration was adequate. The quantification limits (10 s, n = 7), for Hg (194.164 nm) and Pb (220.353 nm) were, respectively, 10 and 30 µg per lamp. Analysis of spiked samples demonstrated reasonable accuracy of the method, with recoveries in the range from 99 to 120% for Hg and from 91 to 107% for Pb. Fifteen analyzed samples showed Hg masses per lamp in the range from 1.6 to 27 mg, and six samples were above the limit allowed by the European Community that is 5 mg per compact lamp. The values for Pb were between 0.07 and 0.75 mg per lamp. By filtrating the slurry in a membrane filter, and analyzing the resulting solution, it was found that all Hg was extracted to the liquid phase of the slurry, while a fraction of about 40% m/v of Pb is retained in the solid particles. The lamp cover glass, after extraction of the phosphor layer, was also analyzed for Hg and Pb. The concentration of Hg in the glass is quite low; however, the Pb content is high.     

Iron,copper and zinc ammonium-1-hydroxyalkylidene-diphosphonates with zero-, one- and two-dimensional covalent metal–ligand structures extended into three-dimensional supramolecular networks by charge-assisted hydrogen-bonding

Hydrothermal synthesis with MCl₂ (M = Fe, Cu, and Zn) and disodium 5-ammonium-1-hydroxypentylidene-1,1-bisphosphonate, (Na⁺)₂[⁺H₃N(CH₂)₄C(OH)(PO₃²⁻)(PO₃H⁻)] (Na₂HAC₅OHP₂) or sodium 3-ammonium-1-hydroxypropylidene-1,1-bisphosphonate hydrate, Na⁺[⁺H₃N(CH₂)₂C(OH)(PO₃H^–)(PO₃H^–)]·H₂O (NaH₂PAM·H₂O) the sodium salt of pamidronic acid, H₃PAM) yielded the one-dimensional (1D) iron, molecular copper and two-dimensional (2D) zinc compounds 1D-{[Fe(μ₃-η⁵-HAC₅OHP₂)]·H₂O}, 1, [Cu(η²-H₂AC₅OHP₂)₂], 2, 2D-{[Zn₂(μ₅-η⁷-AC₅OHP₂)Cl], 3, and 2D-{[Zn(μ₂-η³-H₂PAM)₂], 4, respectively. The bisphosphonate ligand bridges (μ_n) between 2–5 metal atoms and uses 2–7 oxygen donor atoms towards metal coordination (ηⁿ). The zwitterionic nature of the now bis- or tetrakis-deprotonated ammonium–bisphosphonate is retained in the metal complexes. From the reaction of NiCl₂ and Na₂HAC₅OHP₂ the zwitterionic 5-ammonium-1-hydroxypentylidene-1-phosphonic acid, ⁺H₃N(CH₂)₄CH(OH)PO₃H⁻, 5 was obtained as a product of the ligand P–C bond hydrolysis. Adjacent strands, molecules or layers in 1–4, respectively are organized through the Coulomb attraction between the positive ammonium group and the negative phosphonate groups, supported by hydrogen-bonding. Each protic H atom on the C–OH, NH₃⁺ and –PO₃H⁻ group is involved in charge-assisted hydrogen-bonding. The ammonium-pentylidene groups act as hydrophobic separators between the hydrophilic units with the polar M{C(OH)(PO₃)₂} and {NH₃} units. Bond valence sum calculations support the Fe(II) oxidation state in 1, which was experimentally determined from a quantitative polarographic Fe(II)/Fe(III) speciation analysis as well as a temperature variable magnetic study.     

Continuous solid-phase extraction method for the determination of amines in human urine following on-line microwave-assisted acid hydrolysis

Humans are exposed to endogenous or exogenous formation of aromatic amines (AAs) and N-nitrosamines (NAms), which are considered to be potent carcinogens. The objective of this study was to monitor AAs and NAms in human urine to obtain a way to assess exposure. However, while NAms can be directly detected in urine samples, AAs require hydrolysis to convert their conjugates into free amines. A semiautomatic flow-base method is proposed for the simultaneous determination of aliphatic and aromatic NAms, anilines and chloroanilines in human urine in one analytical run. Conjugated AAs are released from urine by on-line microwave-assisted acid hydrolysis without degradation of NAms; all amines were then preconcentrated using solid-phase extraction. Separation/determinations are carried out by gas chromatography and mass spectrometry operating in selected ion monitoring mode. The method is fast (∼15 min for 25 mL of sample) and provides low limits of detection (from 2 to 26 ng/L) with good precision (relative standard deviation within and between days less than 7%). Finally, the proposed method was successfully applied to check AAs and NAms in the human urine of exposed and unexposed researchers. The kinetics of amine excretion in the urine of the researchers exposed is calculated after termination of the exposure and shows half-life times between 1.3 and 2.1 h, and that the dosage absorbed was eliminated within 6 h after exposure.     

3-MCPD in food other than soy sauce or hydrolysed vegetable protein (HVP)

This review gives an overview of current knowledge about 3-monochloropropane-1,2-diol (3-MCPD) formation and detection. Although 3-MCPD is often mentioned with regard to soy sauce and acid-hydrolysed vegetable protein (HVP), and much research has been done in that area, the emphasis here is placed on other foods. This contaminant can be found in a great variety of foodstuffs and is difficult to avoid in our daily nutrition. Despite its low concentration in most foods, its carcinogenic properties are of general concern. Its formation is a multivariate problem influenced by factors such as heat, moisture and sugar/lipid content, depending on the type of food and respective processing employed. Understanding the formation of this contaminant in food is fundamental to not only preventing or reducing it, but also developing efficient analytical methods of detecting it. Considering the differences between 3-MCPD-containing foods, and the need to test for the contaminant at different levels of food processing, one would expect a variety of analytical approaches. In this review, an attempt is made to provide an up-to-date list of available analytical methods and to highlight the differences among these techniques. Finally, the emergence of 3-MCPD esters and analytical techniques for them are also discussed here, although they are not the main focus of this review.     

Different reactivity of hydroxylamine with carbamoyl azides and carbamoyl cyanides: synthesis of hydroxyureas and carbamoyl amidoximes

The carbamoylating agents carbamoyl azides and carbamoyl cyanides (aka cyanoformamides) react with hydroxylamine in different ways, leading in the first case to N-hydroxyureas and, in the case of carbamoyl cyanides, to carbamoyl amidoxime derivatives. The synthetic procedure developed for the latter type of compound, which represents an interesting precursor for heterocyclic structures, allowed the highly efficient preparation of a wide selection of examples. The Z configuration of the double bond in the amidoxime moiety was proposed on the basis of comparison between experimental and calculated (13)C and (15)N NMR chemical shift values for the isopropyl and benzyl derivatives.     

Selecting green suppliers based on GSCM practices: Using fuzzy TOPSIS applied to a Brazilian electronics company

Due to an increased awareness and significant environmental pressures from various stakeholders, companies have begun to realize the significance of incorporating green practices into their daily activities. This paper proposes a framework using Fuzzy TOPSIS to select green suppliers for a Brazilian electronics company; our framework is built on the criteria of green supply chain management (GSCM) practices. An empirical analysis is made, and the data are collected from a set of 12 available suppliers. We use a fuzzy TOPSIS approach to rank the suppliers, and the results of the proposed framework are compared with the ranks obtained by both the geometric mean and the graded mean methods of fuzzy TOPSIS methodology. Then a Spearman rank correlation coefficient is used to find the statistical difference between the ranks obtained by the three methods. Finally, a sensitivity analysis has been performed to examine the influence of the preferences given by the decision makers for the chosen GSCM practices on the selection of green suppliers. Results indicate that the four dominant criteria are Commitment of senior management to GSCM; Product designs that reduce, reuse, recycle, or reclaim materials, components, or energy; Compliance with legal environmental requirements and auditing programs; and Product designs that avoid or reduce toxic or hazardous material use.     

Robust pair‐copula based forecasts of realized volatility

A useful application for copula functions is modeling the dynamics in the conditional moments of a time series. Using copulas, one can go beyond the traditional linear ARMA (p,q) modeling, which is solely based on the behavior of the autocorrelation function, and capture the entire dependence structure linking consecutive observations. This type of serial dependence is best represented by a canonical vine decomposition, and we illustrate this idea in the context of emerging stock markets, modeling linear and nonlinear temporal dependences of Brazilian series of realized volatilities. However, the analysis of intraday data collected from e‐markets poses some specific challenges. The large amount of real‐time information calls for heavy data manipulation, which may result in gross errors. Atypical points in high‐frequency intraday transaction prices may contaminate the series of daily realized volatilities, thus affecting classical statistical inference and leading to poor predictions. Therefore, in this paper, we propose to robustly estimate pair‐copula models using the weighted minimum distance and the weighted maximum likelihood estimates (WMLE). The excellent performance of these robust estimates for pair‐copula models are assessed through a comprehensive set of simulations, from which the WMLE emerged as the best option for members of the elliptical copula family. We evaluate and compare alternative volatility forecasts and show that the robustly estimated canonical vine‐based forecasts outperform the competitors. Copyright © 2013 John Wiley & Sons, Ltd.     

Gaps in the poset of projections in the Calkin algebra

We study the gap structure of the partial order of projections of the Calkin algebra of a complex, separable, infinite-dimensional Hilbert space. We prove the existence of an analytic Hausdorff gap in this partial order. As a consequence we obtain that under Todorcevic’s Axiom and MA the gap spectrum of P(C(H)) is strictly bigger than the gap spectrum of P(ω)/Fin.     

Compact,convex sets in R n and a new banach lattice. II.- Application: An approximation problem.

We develop a calculus structure in the Banach lattice introduced in a preceding paper, having in mind an approximation problem appearing in non-smooth optimization. We show that the essential results depend as much on the order structure as on the analytical one.     

Electronic and elastic properties of expanded radialenes carbon nanotubes

The series of expanded radialenes of molecular formulae C_2n H _n and C_3n H _n are obtained by inserting acetylene or diacetylene groups between each pair of methylene units of radialenes C _n H _n . This paper reports on the new theoretical investigation of electronic and elastic properties of some carbon nanotubes based on expanded radialenes with different diameters and with the armchair and zigzag edges Using the ABINIT software package, which is based on the density functional theory (DFT), we found that all studied carbon nanotubes based on expanded radialenes possess metallic behavior. Also, the calculations show that the elastic properties of the nanotubes depend on the form of the rolling up (armchair (m,m) or zigzag (m,0)). The Young’s modulus is slightly smaller for the (m,0) nanotubes and a bit larger for (m,m) nanotubes.