A Novel Naphthalene-Immobilized Nanoporous SBA-15 as a Highly Selective Optical Sensor for Detection of Fe<Superscript>3+</Superscript> in Water

A novel organic-inorganic hybrid optical sensor (SBA-NCO) was designed and synthesized through immobilization of isocyanatopropyl-triethoxysilane and 1-amino-naphthalene onto the surface of SBA-15 by post-grafting method. The characterization of materials using XRD, TEM, N₂ adsorption-desorption, and FT-IR techniques confirmed the successful attachment of organic moieties and preserving original structure of SBA-15 after modification step. Fluorescence experiments demonstrated that SBA-NCO was a highly selective optical sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ in a wide pH values.     

Electrochemical synthesis and characterization of solid-phase microextraction fibers using conductive polymers: application in extraction of benzaldehyde from aqueous solution

In this work, polyaniline, polypyrrole, and polyaniline/polypyrrole composite fibers were synthesized in the absence and presence of oxidized multiwalled carbon nanotubes using electrochemical cyclic voltammetry with CF₃COOH as dopant. Thermal stability of these fibers was studied by differential scanning calorimetry. Then, headspace solid-phase microextraction process coupled with gas chromatography and flame ionization detector was used for comparing extraction capability of benzaldehyde from aqueous solution. Since polyaniline fiber showed better extraction efficiency than the other fibers, its preparation conditions including acid concentration, aniline concentration, scan rate, and amount of multiwalled carbon nanotubes were studied by means of the “one-factor-at-a-time method”. The analytical performance of polyaniline fibers were investigated to determine benzaldehyde from the aqueous solution. The morphology and texture of polyaniline fibers were examined by field emission scanning electron microscopy and Fourier transform infrared spectroscopy analyses. The attained results revealed that the perfect conditions for acid concentration, aniline concentration, scan rate, and multiwalled carbon nanotubes content were 0.5 M, 0.2 M, 25 mV s^?1, and 0.02 wt%, respectively. The limit of detection for the proposed polyaniline fiber was 15 ng ml^?1.     

One-pot synthesis of various xanthene derivatives using ionic liquid 1, 3-disulfonic acid imidazolium hydrogen sulfate as an efficient and reusable catalyst under solvent-free conditions

In this study, 1,3-disulfonic acid imidazolium hydrogen sulfate （DSIMHS） is used as an efficient and reusable ionic liquid for the green, mild, and efficient synthesis of xanthenes under solvent-free conditions. Simple and easy work-up, low cost, green process, short reaction times and excellent yields of the products are the advantages of this procedure. Further, the catalyst can be recycled and reused at least for four times without a noticeably decrease in its catalytic activity.     

Ni(II)-Schiff base/SBA-15: a nanostructure and reusable catalyst for one-pot three-component green synthesis of 3,4-dihydropyrano[3,2-c]chromene derivatives

Research on Chemical Intermediates - An efficient, rapid, and environmentally benign Ni(II)-Schiff base/SBA-15-catalyzed one-pot three-component cyclocondensation process was described via the...     

Synthesis,characterization, and design of a photocatalyst based on BiOBr nanoplates and tin porphyrin with enhanced visible light photocatalytic activity

Research on Chemical Intermediates - The bismuth oxybromide (BiOBr) photocatalyst was first synthesized via a simple co-precipitation method. To improve the visible light photocatalytic activity of...     

Evaluation of occupational noise pollution and attitudes of exposed workers in two metal industries

The purpose of the present study was to determined noise levels and to show the annoyance reaction, hearing loss, hearing impairment by the workers due to the occupational noise exposure according to Iran development of Environment （IDE） and also awareness about effects of noise and use of hearing protective devices （HPD） in the two manufacturing electronic equipment （metal） industries. The present study was carried out among industrial workers and included a sample of lao workers, site 1 （n = 52） and site 2 （n = 78） from two metal industries located in south eastern Iran province of Kerman. In order to attend the objectives of the current study, noise levels evaluation was determined throughout all different work stations in both industries. The results of the study revealed that noise levels in 75% of the stations are higher than limits used for assessment of noise for community response. The result of the study indicated that noise levels in the workplace are （66%） very high, （28%） high and only 6% low. Workers having higher education are much aware of the health impact due to occupational noise. Chi-square analysis indicated that the difference in educational background and not wearing HPD was significant and also a significant relationship was also observed between the impact of occupational noise on the health and education status. This research has clearly demonstrated that the workers in both the metal industries included in this study are at high risk of developing noise induced hearing loss and other associated ailments due to excessive occupational exposure to noise. There is a need to develop and apply a well-defined, comprehensive and enforceable training programs and noise regulation. The study revealed that the workers having higher education （9-12 grades） are much aware of the health impact due to occupational noise exposure. There is a need to establish a hearing conservation programs in both industries, the components of such program include noise assessment, use of hearing protection devices, audiometric and increasing awareness among the workers about the adverse effects of noise.     

FeNH4(SO4)2·12H2O (alum)-catalyzed preparation of 1,4-dihydropyridines: improved conditions for the Hantzsch reaction

Abstract  

FeNH₄(SO₄)₂·12H₂O (alum) efficiently catalyzes the one-pot three-component reaction of dimedone, aldehydes, and 3-aminocrotonate to afford 1,4-dihydropyridines. The work-up is easy, and the products are obtained in good to excellent yields and high purity.     

Monitoring the effects of homogeneity methanol/water/monomer on the mode of polymerization of styrene: dispersion polymerization versus emulsion polymerization

The polymerization of styrene (St) was carried out with varying amounts of methanol in aqueous medium. As methanol content decreased (to 50 %), the phase of polymerization mixture (methanol/water/monomer) changed to a heterogeneous state; the homogeneous state was obtained in samples that contain 75 and 100 % methanol. In order to verify the mechanism of polymerization in heterogeneous and homogeneous mixtures, the nucleus formation rate during polymerization, the stability equilibrium of the media and seeded particles, and the size of particles and their growth in polymerization were experimentally being monitored. With the homogeneous mixture in 75 wt% methanol, dumbbell, triangle, and peanut-like particles have been formed. On the other hand, the characteristics of the polymerization products were different from those typically obtained in the emulsion polymerization and in the sample with 100 wt% methanol dispersion polymerization. In the sample with 100 % methanol and in one with 50 % methanol, monodispersed spherical particles are formed in the final conversion. Thus, homogeneity in the aqueous methanol mixture can be a critical factor in determining the polymerization modes between dispersion and emulsion polymerization.     

Controlling morphology and structure of nanocrystalline cadmium sulfide (CdS) by tailoring solvothermal processing parameters

Cadmium sulfide (CdS) with different morphologies was successfully prepared by solvothermal process by controlling the processing parameters, including nature of precursor and solvent, reaction temperature and process time. X-ray diffraction patterns revealed that, in all cases highly pure and crystallized CdS with hexagonal structure were obtained. In addition, it was found that the processing parameters influence on preferable growth direction of CdS nanostructures. Field emission scanning electron microscope analysis showed that CdS nanowires with different aspect ratios were obtained (depending upon the reaction temperature and process time) in presence of sulfur powder and ethylenediamine, whereas CdS nanoparticles were produced by sulfur powder and ethanolamine. Moreover, CdS nanorods were prepared using thiourea and ethylenediamine. Transmission electron microscope image confirmed that CdS nanowire with one of the highest aspect ratio reported in the literature (i.e., 255) was achieved using sulfur powder and ethylenediamine at 200 °C reaction temperature for 72 h process time. UV–Vis absorption spectra of CdS nanostructures prepared under different conditions displayed a blue shift relative to that of bulk CdS due to the quantum size effect.