Drop deformation under surfactants adsorption

The movements of free liquid drops, resulting from unbalanced surface tension gradients, in our case the adsorption of a surfactant, constitute important surface phenomena (Marangoni effect). The aim of this paper is to correlate the effect of pressure forces on the drop, with the surface coverage degree, namely with the extent to which the drop surface is covered by the surfactant. Our model shows that for a covered degree less then about 68°, these forces are negative. This means that these forces exerted by the external liquid upon the drop are oriented towards the negative direction of the normal to the drop surface, acting like a hammer. Some numerical data are given. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

SiO2-Iron Oxide Composites Obtained by Sol-Gel Method

Composite SiO₂-iron oxide materials were prepared by three experimental procedures. In the first case (1), the iron oxides were precipitated during the sol-gel process. In the second case (2), the SiO₂ matrix was initially obtained, and the iron oxides were formed by thermal treatment after impregnation of a soluble Fe²⁺ salt in the previously processed matrix. In the third method (3), ferrite powders, prepared by wet chemical method, were embedded into a SiO₂ based sol-gel matrix. Two type of precursors (tetraethoxysilane (TEOS) or methyltriethoxysilane (MTEOS) were used as SiO₂ sources. Various properties versus both type of precursor and on the method of preparation were noticed. Materials with high porosity and nano-sized iron oxide content could be prepared using the mentioned above methods.     

Electronic properties of furyl substituents at phosphorus and their influence on 31P NMR chemical shifts

The electronic properties of 2-furyl and 3-furyl substituents attached to phosphanes and phosphonium salts were studied by means of IR spectroscopy and experimental and computational (31)P NMR spectroscopy. The heteroaromatic systems proved to be electron withdrawing with respect to phenyl substituents. However, phosphorus atoms with attached furyl substituents are strongly shielded in NMR. The reason for this phenomenon was studied by solid state (31)P MAS NMR experiments. The chemical shift tensor was extracted, and the orientation within the molecules was determined. The tensor component sigma(33), which is effected the most by furyl systems, is oriented perpendicular to the P-C bonds of the substituents. P-furyl bonds are shorter than P-phenyl bonds. We assume therefore a lower ground-state energy of the molecules, because of the electron withdrawing properties of the 2-furyl systems. The sigma(para) component of the (31)P NMR magnetic shielding is therefore smaller, which results in an overall increase of the magnetic shielding.     

Automatic chemiluminescence-based determination of carbaryl in various types of matrices

Carbaryl, a modern pesticide widely used for both agricultural and non-agricultural purposes, was determined from the chemiluminescence produced in its reaction with Ce(IV) in a nitric acid medium containing rhodamine 6G as sensitizer, using flow-injection techniques. A straightforward automatic method based on measurements peak height and peak area, which are directly proportional to the carbaryl concentration, was thus developed. Calibration graphs are linear over the concentration range from 50 to 2000 ng mL⁻¹. The limit of detection, as determined according to Clayton, is 45.6 and 28.7 ng mL⁻¹ for peak height and peak area measurements, respectively. The relative standard deviation for 10 samples was less than 1.4% with both types of measurements. Two commercial formulations containing carbaryl were analysed using both types of measurements, which provided acceptable recovery values. Solid-phase extraction was used to concentrate and separate the analyte from the matrix. The method was successfully applied to the analysis of spiked water samples as well as in soil and grain samples. The proposed method exhibited a high selectivity no other pesticide containing the naphthalene group such as antu, napropamide or naftalam, etc., was found to interfere with the determination of carbaryl.     

Decrease of luminol chemiluminescence upon exposure of human blood serum to 50 Hz electric fields

The chemiluminescence of luminol, after 1 and 2h in vitro exposure of human serum to 50 Hz electric fields of different intensities, decreases as compared to the controls. This indicates a field-induced decrease in the concentration of the free radicals. The report is limited to the key kinetic and field data, inviting independent kinetic analysis of the data in terms of reaction moments or reaction susceptibilities for the various normal modes indicated by the data.     

Coencapsulation of Butyl‐Methoxydibenzoylmethane and Octocrylene into Lipid Nanocarriers: UV Performance,Photostability and in vitro Release

The coencapsulation of two UV filters, butyl‐methoxydibenzoylmethane (BMDBM) and octocrylene (OCT), into lipid nanocarriers was explored to develop stable cosmetic formulations with broad‐spectrum photoprotection and slow release properties. Different types of nanocarriers in various concentrations of the two UV filters were tested to find the combination with the best absorption and release properties. Solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) have been the two types of lipid nanocarriers used. The NLCs were based on either medium chain triglycerides (MCT) or squalene (Sq). The following physicochemical properties of the nanocarriers have been evaluated: particle size, morphology, zeta potential (ZP), entrapment efficiency, loading capacity, and thermal behavior. The nanocarriers have been formulated into creams containing low amounts of UV filters (2.5% BMDBM and 1% OCT). The best photoprotection results were obtained with the cream based on NLCs prepared with MCT, having a sun protection factor (SPF) of 17.2 and an erythemal UVA protection factor (EUVA–PF) of 50.8. The photostability of the encapsulated BMDBM filter was confirmed by subjecting the nanocarriers‐based creams to in vitro irradiation. The prolonged UV‐protection efficacy was coupled with a slow in vitro release of the synthetic UV filters, which followed the Higuchi release model.     

Determination of ascorbic acid content of some fruit juices and wine by voltammetry performed at pt and carbon paste electrodes

A method was developed for assessing ascorbic acid concentration in fruit juices and wine by differential pulse voltammetry. The oxidation peak for ascorbic acid occurs at about 530 mV (versus SCE) on a Pt strip working electrode and at about 470 mV on a carbon paste working electrode. The influence of the operational parameters like the pulse amplitude and the pulse period on the analytical signal was investigated. The obtained calibration graph shows a linear dependence between the peak height and ascorbic acid concentration within the range 0.31-20 mM with a Pt working electrode, and within the range 0.07-20 mM with a carbon paste working electrode. The equation of the calibration graph was y = 21.839x + 35.726, r2 = 0.9940, when a Pt strip electrode was used (where y represents the value of the current intensity measured for the peak height, expressed as μA and x the analyte concentration, as mM). R.S.D. = 2.09%, n = 10, C(ascorbic acid) = 2.5 mM. The equation of the calibration graph was y = 3.4429x + 5.7334, r2 = 0.9971, when a carbon paste electrode was used (where y represents the value of intensity measured for the peak height, expressed as μA and x the analyte concentration, as mM). R.S.D. = 2.35%, n = 10, C(ascorbic acid) = 2.5 mM. The developed method was applied to ascorbic acid assessment in fruit juices and wine. The ascorbic acid content determined ranged between 6.83 mg/100 mL juice for soft drinks (Fanta Madness) and 54.74 mg/100 mL for citrus (lemon) juices obtained by squeezing fruit. Different ascorbic acid concentrations (from standard solutions) were added to the analysed samples, the degree of recovery being comprised between 94.74 and 104.97%. The results of ascorbic acid assessment by differential pulse voltammetry were compared with those obtained by cyclic voltammetry. The results obtained by the two methods were in good agreement.     

Rapid Capillary‐Assisted Solution Printing of Perovskite Nanowire Arrays Enables Scalable Production of Photodetectors

Despite recent progress in producing perovskite nanowires (NWs) for optoelectronics, it remains challenging to solution‐print an array of NWs with precisely controlled position and orientation. Herein, we report a robust capillary‐assisted solution printing (CASP) strategy to rapidly access aligned and highly crystalline perovskite NW arrays. The key to the CASP approach lies in the integration of capillary‐directed assembly through periodic nanochannels and solution printing through the programmably moving substrate to rapidly guide the deposition of perovskite NWs. The growth kinetics of perovskite NWs was closely examined by in situ optical microscopy. Intriguingly, the as‐printed perovskite NWs array exhibit excellent optical and optoelectronic properties and can be conveniently implemented for the scalable fabrication of photodetectors.     

Synthesis and Characterization of a Novel Phosphonate Metal Organic Framework Starting from Copper Salts

Abstract

Increased interest in the area of metal phosphonate inorganic–organic frameworks is exemplified with a high range of applications and a rich synthetic and structural chemistry of these compounds. The synthesis and potential applications of a novel metal phosphonate, namely Cu(II) phenylvinylphosphonate (PVP) is described in this paper. Syntheses were performed starting from a 1:1 molar ratio of a Cu(NO₃)₂·6H₂O or CuSO₄·5H₂O and 1-phenylvinylphosphonic acid under hydrothermal conditions at pH values ranging between 2.8 and 3.1. The influence of different counterion for the copper salt used as the Cu(II) source on the structure and crystallinity of the final product was studied. The obtained copper(II) phenylvinylphosphonate compounds were characterized by X-ray powder diffraction, FT-IR spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and energy-dispersive X-ray spectrometry (EDAX). A possible crystal structure for the copper (II) phenylvinylphosphonate products is proposed using semiempirical approaches.