Interaction of aryldiazonium salts with some schiff-base complexes of cobalt and ruthenium

The interaction of aryldiazonium ions with some Schiff-base complexes of cobalt and ruthenium have been studied. With cobalt, one-electron oxidation of [Co(II)Salen] occurred; with [Co(I)Salen] the corresponding Co(III)-aryl complexes were isolated. In the case of ruthenium oxidation also occurs, [Ru(Salen)(CO)py] gave the corresponding monocation. The results, especially for ruthenium, are in contrast to the stabilisation of both nitrosyl and aryldiazonium adducts in analogous porphyrin complexes.     

Determination of the amino acid tryptophan and the biogenic amine tryptamine in foods by the heavy atom induced-room temperature phosphorescence methodology

Very simple and selective methods are presented to determine the amino acid tryptophan (Trp) and the biogenic amine tryptamine (Tryp), both compounds with an indole-type molecular structure by the methodology named Heavy Atom Induced-Room Temperature Phosphorescence (HAI-RTP) which constitutes the first time that HAI-RTP has been used to detect compounds with non-naphthalenic structures in their molecules. Different variables affecting the phosphorescence signal (heavy atom perturber and sodium sulfite concentration) were carefully studied. The analytical curves give a linear dynamic range of 15-100 ng ml(-1) and a detection limit of 4 ng ml(-1) for Trp and 94-400 ng ml(-1) and 28 ng ml(-1) for Tryp. The methods have been successfully applied to the analysis of complex food matrices such as the presence of tryptophan in yoghurt and tryptamine in bottled beer. A single alkaline hydrolysis to release Trp from yoghurt proteins and two methods for extracting Tryp from beer samples are proposed and optimised. A total Trp content of 374 mg of Trp per kg of yoghurt was quantified by the standard addition method of calibration and a recovery of 90% was obtained for 250 ng ml(-1) of Tryp in spiked non-alcoholic beer samples.     

Understanding the catalytic role of flexible chiral δ-amino alcohols: the 1-(2-aminoethyl)norbornan-2-ol model

An empiric first approach to the knowledge about the structural factors influencing the catalytic behavior of conformationally flexible δ-amino-alcohol-based ligands, for the enantioselective addition of dialkylzincs to prochiral carbonyl groups, has been applied using the 1-(2-aminoethyl)norbornan-2-ol moiety as the model chiral system, and the asymmetrically catalyzed addition of diethylzinc to benzaldehyde as the test reaction. For this purpose, a selected small library of seven norbornane-based chiral ligands, bearing well-defined structural variations to allow a comparative study, that is, variation of the relative configuration and steric hindrance at the C(2), C(3) and/or C(7) norbornane positions, has been synthesized and probed in the mentioned test reaction. The experimental results obtained have been rationalized empirically using diastereomeric Noyori-like transition states, demonstrating that the conformational flexibility of the δ-amino-alcohol ligands, contrary to the more studied and rigid β-amino-alcohols, plays a crucial role on the catalytic behavior of such ligands (stereochemical sense and degree of the stereodifferentiation in the asymmetric process), which makes such structural factors, important for the improved design of new related chiral catalysts. In this sense, a robust crude empirical model for the prediction of the catalytic behavior of such δ-amino-alcohol-based ligands is proposed.     

Room-temperature synthesis and conductivity of the pyrochlore type Dy2(Ti1−yZry)2O7 (0?y?1) solid solution

Different compositions in a solid solution of general formula Dy₂(Ti_1−yZr_y)₂O₇, showing high oxygen ion conductivity, have been successfully prepared at room temperature via mechanochemical synthesis. Stoichiometric mixtures of the constituent oxides were dry milled together in a planetary ball mill by using zirconia vials and balls. Chemical changes in the powder mixtures as a function of composition and milling time were followed by X-ray diffraction and revealed that, in all cases and after milling for 19 h, the powder mixtures consisted of a single phase. Electrical properties were measured on sintered pellets as a function of frequency, temperature and zirconium content, revealing an increase in conductivity of more than one order of magnitude for y?0.4, which, as observed in the similar Y₂(Ti_1−yZr_y)₂O₇, has been related with the onset of disordering of the anion sublattice. Despite increasing structural disorder with increasing Zr content, conductivity remains almost constant for y>0.6, reaching a maximum value of ∼5×10⁻³ for Dy₂Zr₂O₇ at 900 °C.     

Porous metal–organic alloys based on soluble coordination cages

Diverse strategies for the preparation of mixed-metal three-dimensional porous solids abound, although many of them lend themselves only moderate levels of tunability. Herein, we report the design and synthesis of surface functionalized permanently microporous coordination cages and their use in the isolation of mixed metal solids. Judicious alkoxide-based ligand functionalization was utilized to tune the solubility of starting copper(ii)-based cages and their resulting compatibility with the mixed-cage approach described here. We further prepared a family of isostructural molybdenum(ii) cages for a subset of the ligands. The preparation of mixed-metal cage solids proceeds under facile conditions where solutions of parent cages are mixed and product phases isolated. A suite of spectroscopic and characterization tools confirm the starting cages are intact in the amorphous product. Finally, we show that utilization of precise ligand functional groups can be used to prepare mixed cage solids that can be easily and cleanly separated into their constituent components through simple solvent washing or solvent extraction techniques.

Surface-functionalized porous coordination cages can be used to create homogeneous mixed-cage alloys with high levels of tunability and processability.     

O2 interaction and reactivity on a model hydroxylated rutile(110) surface

Recently several theoretical studies have examined oxygen adsorption on the clean, reduced TiO2(110) surface. However the photocatalytic behavior of TiO2 and the scavenging ability of oxygen are known to be influenced by the presence of surface hydroxyls. In this paper the chemistry of O2 on the hydroxylated TiO2 surface is investigated by means of first-principles total energy calculations and molecular dynamics (MD) simulations. The MD trajectories show a direct, spontaneous reaction between O2 and the surface hydroxyls, thus supporting the experimental hypothesis that the reaction does not necessarily pass through a chemisorbed O2 state. Following this reaction, the most stable chemisorbed intermediates are found to be peroxide species HO2 and H2O2. Although these intermediates are very stable on the short time scale of MD simulations, the energetics suggests that their further transformation is connected to a new 300 K feature observed in the experimental water temperature programmed desorption (TPD) spectrum. The participation of two less stable intermediate states, involving terminal hydroxyls and/or chemisorbed water plus oxygen adatoms, to the desorption process, is not supported by the total energy calculations. Analysis of the projected density of states, however, suggests the possibility that these intermediates have a role in completing the surface oxidation immediately before desorption.     

New results for the OH (nu = 0,j = 0) + CO (nu = 0,j = 0) --> H + CO2 reaction: Five- and full-dimensional quantum dynamical study on several potential energy surfaces

Full- [six-dimensional (6-D)] and reduced-dimensional [five-dimensional (5-D)] quantum wave packet calculations have been performed for the title reaction to obtain reaction probabilities deriving from the ground rovibrational states of OH and CO with total angular momentum J = 0. Three potential energy surfaces (PES) are studied, namely, those of Bradley and Schatz (BS), Yu, Muckerman, and Sears (YMS), and Lakin, Troya, Schatz, and Harding (LTSH). 6-D calculations are performed only for the BS PES, while 5-D results are reported for all three PES'. The 6-D results obtained in the present work improve on those previously reported, since a larger vibrational basis and a better representation of the OH and CO bonds has been introduced. In particular, we now employ a generalized Lanczos-Morse discrete variable representation for both the OH and CO vibrations. In a further improvement, the generalized discrete variable representation of the CO vibration is based on different CO intramolecular potentials for the asymptotic and product grids employed in our projection formalism. This new treatment of the vibrational bases allows for a large reduction in computation time with respect to our previous implementation of the wave packet method, for a given level of accuracy. As a result, we have been able to extend the range of collision energies for which we can obtain converged 6-D results to a higher energy (0.8 eV) than was possible before (0.5 eV). The comparison of the new 6-D and previous 5-D results for the BS PES shows good agreement of the general trend in the reaction probabilities over all collision energies considered (0.1-0.8 eV), while our previous 6-D calculation showed reaction probabilities that differed from the 5-D results by up to 10% between 0.5 and 0.8 eV. The 5-D reaction probabilities reveal interesting trends for the different PES'. In particular, at low energies (< 0.2 eV) the LTSH PES gives rise to much larger reactivity than the other PES', while at high energies (> 0.3 eV) its reaction probability decreases with respect to the BS and YMS PES', being more than a factor of 2 smaller at 0.8 eV. A 5-D calculation on a modified version of the LTSH surface shows that the van der Waals interaction in the entrance channel, which is not correctly described in the other PES' is largely responsible for its larger reactivity at low energies. The large difference between the 5-D reaction probabilities for the YMS and LTSH PES' serves to emphasize the importance of the van der Waals interaction for the reactivity at low energies, because most of the stationary point energies on the YMS and LTSH PES are rather similar, being in line with high-level ab initio information.     

Mass spectrometry of heterocyclic compounds—III. Electron-impact-induced fragmentation of 1,2-benzisothiazole and some 3-substituted derivatives

The mass spectra of fifteen 1,2-benzisothiazoles are reported; their fragmentation patterns have been investigated by labelling experiments, high resolution mass measurements and defocused metastable ion detection. The parent compound of the series, 1,2-benzisothiazole, eliminates HCN after partial inter-ring hydrogen scrambling. The extent of scrambling has been determined for normal daughter ions produced at different electron beam energies and also for metastable daughter ions, and is compared with the data reported for benzothiazole. Some 3-substituted derivatives show unusual fragmentation patterns. The mechanisms of these processes are under further investigation.     

Microwave-assisted synthesis of bipyrazolyls and pyrazolyl-substituted pyrimidines

We describe the preparation of 1,4′-bipyrazolyls and 4-pyrazolylpyrimidines by the reaction of 2-pyrazolyl-3-dimethylamino acrylate and acrylonitrile with double nucleophilic reagents such as hydrazines, urea and guanidine. Reactions were performed under microwave irradiation in 5-60 min. This is a useful procedure for the preparation of valuable compounds with applications in medicinal and coordination chemistry.     

Naproxen: Hydroxypropyl-β-Cyclodextrin:Polyvinylpyrrolidone Ternary Complex Formation

The aim of the present study was to investigate the effect of the presence of thewater-soluble polymer polyvinylpyrrolidone (PVP) MW = 24000 g/mol, on thecomplexation of the phototoxic anti-inflammatory drug naproxen, in its sodiumsalt form, with hydroxypropil-β-cyclodextrin (HP-β-CD). The datashown that the polymer interacts with the free naproxen and with thenaproxen:HP-β-CD inclusion complex. The presence of different proportions of PVP, in the 0–1%(w/w) rangesystematically increased the K_app of the naproxen:HP-β-CD inclusioncomplex formation. The cause of this increase is that the polymer interactswith the HP-β-CD with a binding constant of K₂ = 29000 ± 53 M^-1; and with the naproxen:HP-β-CD inclusion complex, to givea ternary complex naproxen:HP-β-CD:PVP. The binding constant of thisprocess was K₃ = 5350 ± 1 M^-1. NMR data revealed that in the ternary system, PVP is outside of the cyclodextrin, and therefore must be wholly or partially recovering the naproxen:HP-β-CD inclusion complex.