Templated synthesis of the novel layered silver-antimony sulfides [H3NCH2CH2NH2][Ag2SbS3 and [H3NCH2CH2NH2]2[Ag5Sb3S8

Two new silver-antimony sulfides, [C(2)H(9)N(2)][Ag(2)SbS(3)] (1) and [C(2)H(9)N(2)](2)[Ag(5)Sb(3)S(8)] (2), have been prepared solvothermally in the presence of ethylenediamine and characterized by single-crystal X-ray diffraction, thermogravimetry, and elemental analysis. Compound 1 crystallizes in the space group Pn (a = 6.1781(1) A, b =11.9491(3) A, c = 6.9239(2) A, beta =111.164(1) degrees ) and 2 in the space group Pm (a = 6.2215(2) A, b = 15.7707(7) A, c = 11.6478(5) A, beta = 92.645(2) degrees ). The structure of 1 consists of chains of fused five-membered Ag(2)SbS(2) rings linked to form layers, between which the template molecules reside. Compound 2 contains honeycomb-like sheets of fused silver-antimony-sulfide six-membered rings linked to form double layers. The idealized structure can be considered to be an ordered defect derivative of that of lithium bismuthide, Li(3)Bi, and represents a new solid-state structure type.     

Superoxide dismutase targets NO from GSNO to Cysbeta93 of oxyhemoglobin in concentrated but not dilute solutions of the protein

The role of hemoglobin (Hb) in transmitting the vasodilatory property of NO throughout the vascular system is of much current interest. NO exchange between Hb and low-molecular-weight nitrosothiols such as S-nitrosoglutathione (GSNO) has been speculated and reported in vitro. Previously, we reported that NO delivery from GSNO to Cysbeta93 of human oxyHb is prevented in the presence of the Cu chelators, neocuproine, and DTPA.(1) In the present work, 5 mM solutions of commercial human Hb were found by ICP-MS to contain approximately 20 microM Cu and Zn, suggesting the presence of Cu,Zn-superoxide dismutase (CuZnSOD), which was confirmed by Western blotting. SOD activity measurements were consistent with the presence of approximately 20 microM CuZnSOD monomer in 5 mM Hb solutions, which is the physiological concentrations of these proteins in the red blood cell. Incubation of 3.75 mM oxyHb (15 mM heme; 7.5 mM Cysbeta93) with 3.75 or 7.5 mM GSNO gave rise to 50% or 100% S-nitrosation, respectively, of Cysbeta93 as monitored by FTIR nu(SH) absorption, whereas excess GSNO over Cysbeta93 converted oxyHb to metHb due to the reaction, oxyHb + NO<==>metHb + NO(3)(-). Removal of CuZnSOD by anion-exchange chromatography yielded an oxyHb sample that was unreactive toward GSNO, and replacement with bovine CuZnSOD restored reactivity. Addition of 1 microM GSNO (Cysbeta93/GSNO = 1) to solutions diluted 10(4)-fold from physiological concentrations of oxyHb and CuZnSOD resulted largely in metHb formation. Thus, this work reports the following key findings: CuZnSOD is an efficient catalyst of NO transfer between GSNO and Cysbeta93 of oxyHb; metHb is not detected in oxyHb/GSNO incubates containing close to the physiological concentration (5 mM) of Hb and CuZnSOD when the Cysbeta93/GSNO molar ratio is 0.5 to 1.0, but metHb is detected when the total Hb concentration is low micromolar. These results suggest that erythrocyte CuZnSOD may play a critical role in preserving the biological activity of NO by targeting it from GSNO to Cysbeta93 of oxyHb rather than to its oxyheme.     

A phase I, randomized study of combined IL-2 and therapeutic immunisation with antiretroviral therapy

Background  

Fully functional HIV-1-specific CD8 and CD4 effector T-cell responses are vital to the containment of viral activity and disease progression. These responses are lacking in HIV-1-infected patients with progressive disease. We attempted to augment fully functional HIV-1-specific CD8 and CD4 effector T-cell responses in patients with advanced chronic HIV-1 infection.     

Precision synthesis of microstructures in star‐shaped copolymers of ϵ‐caprolactone,L‐lactide,and 1,5‐dioxepan‐2‐one

Star‐shaped homo‐ and copolymers were synthesized in a controlled fashion using two different initiating systems. Homopolymers of ε‐caprolactone, L ‐lactide, and 1,5‐dioxepan‐2‐one were firstly polymerized using (I) a spirocyclic tin initiator and (II) stannous octoate (cocatalyst) together with pentaerythritol ethoxylate 15/4 EO/OH (coinitiator), to give polymers with identical core moieties. Our gained understanding of the versatile and controllable initiator systems kinetics, the transesterification reactions occurring, and the role which the reaction conditions play on the material outcome, made it possible to tailor the copolymer microstructure. Two strategies were used to successfully synthesize copolymers of different microstructures with the two initiator systems, i.e., a more multiblock‐ or a block‐structure. The correct choice of the monomer addition order enabled two distinct blocks to be created for the copolymers of poly(DXO‐co‐LLA) and poly(CL‐co‐LLA). In the case of poly(CL‐co‐DXO), multiblock copolymers were created using both systems whereas longer blocks were created with the spirocyclic tin initiator. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 1249–1264, 2008     

Characterization of dielectric barrier electrospray ionization for mass spectrometric detection

A novel electrospray interface is presented which induces an electric field by dielectric polarization through a non-conductive barrier. Therefore, a square-wave high-voltage signal is applied. This technique allows mass spectrometric measurements in the positive as well as in the negative mass spectrometry mode without changing the polarity of the potential applied, and it decreases the risk of undesired discharges, induced by high electric currents. The applicability of this technique is demonstrated by mass spectrometric determination of reserpine.     

Synthesis of core‐shell structured carboxylated microparticles with a straightforward procedure and their evaluation as a polymer support

Poly(trimethylolpropane trimethacrylate) microspheres with a narrow size distribution were obtained by precipitation polymerization. They were subsequently modified by surface grafting with acrylic acid in a polar ethanol–water reaction medium, without stabilizer, yielding core‐shell particles with diameters in the micrometer range. The resulting polymeric material was characterized by SEM and potentiometric titration, FTIR spectroscopy, and thermal analysis. It was shown that the particle characteristics (size, size distribution, and functionality) obtained by this straightforward procedure can be controlled by modifying the synthesis parameters (monomer concentration, agitation rate, and temperature). The high functionality, the chemical and physico‐mechanical stability, as well as the possibility to control the performances of the resulting polymeric materials by synthesis allow its applications in various areas. Envisaging separation and catalysis domains, Cu(II), Cd(II), and Cr(III) uptake capacity from aqueous solutions was investigated under noncompetitive conditions as a function of synthesized particle functionality, time, and pH range. It was also found that the addition of the carboxylated microparticles to polyethylene stabilized with α‐tocopherol improved the thermo‐oxidative behaviour of the polymeric material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5889–5898, 2005     

Use of ion mobility mass spectrometry and a collision cross‐section algorithm to study an organometallic ruthenium anticancer complex and its adducts with a DNA oligonucleotide

We report the development of an enhanced algorithm for the calculation of collision cross‐sections in combination with Travelling‐Wave ion mobility mass spectrometry technology and its optimisation and evaluation through the analysis of an organoruthenium anticancer complex [(η⁶‐biphenyl)Ru^II(en)Cl]⁺. Excellent agreement was obtained between the experimentally determined and theoretically determined collision cross‐sections of the complex and its major product ion formed via collision‐induced dissociation. Collision cross‐sections were also experimentally determined for adducts of this ruthenium complex with the single‐stranded oligonucleotide hexamer d(CACGTG). Ion mobility tandem mass spectrometry measurements have allowed the binding sites for ruthenium on the oligonucleotide to be determined. Copyright © 2009 John Wiley & Sons, Ltd.     

One-pot synthesis of tripodal tris(2-aminoethyl)amine derivatives from seven molecular components

Complex tripodal tris(2-aminoethyl)amine (tren)-based ligands have been prepared in a single-pot reaction of tren with 3 equiv each of cyclohexenone and a benzaldehyde derivative (i.e., from seven components and three molecular types). The highest yield of product was obtained for p-nitrobenzaldehyde, the most electrophilic aldehyde used.     

Simultaneous Spectrophotometric Determination of Imipramine Hydrochloride with Chlordiazepoxide and Nortriptyline Hydrochloride with Fluphenazine Hydrochloride

Spectrophotometry was used with multivariate calibration to simultaneously determine compounds in mixtures. Two antidepressant mixtures were investigated: imipramine hydrochloride and chlordiazepoxide and nortriptyline hydrochloride and fluphenazine hydrochloride. Considerable spectral overlap and large differences in component concentrations were challenges. Since this type of analysis is often performed using complex algorithms, a simple strategy was used here for the simultaneous determination of both mixture components by classical least squares, principal component regression, and partial least squares. Experimental design was used to select the optimum parameters including the wavelength range, sampling interval, software, and derivative order. Accuracy was enhanced by proper wavelength selection. In addition, derivatives of the raw spectra improved the selectivity. The standard deviation, deviation of mean recovery from 100%, and prediction ability of the models were used as the responses. In respect to these terms, first-order derivatization of the spectra and a sampling interval of 1?nm provided the best results. In particular, the low concentration compounds in the mixtures (chlordiazepoxide and fluphenazine) were determined more accurately with precision lower than 3%. The strategy was used for the quality control of pharmaceuticals containing the mixtures without chemical pretreatment.