Microdetermination of calcium, strontium and barium using the ring-oven method

Summary The ring-oven technique is recommended for the identification and determination of Ca, Sr and Ba in the micro scale. The elements are first converted into their nitrates and Ca is washed out by a mixture of absolute alcohol and ether. Sr is then separated from Ba as soluble diethyldithiocarbamidate in alcohol-ether. The rings obtained are developed by rhodizonate (Sr, Ba) and pyrogallol (Ca). Quantitative determinations are possible by comparison with standard rings. 0.60 g of Ca, 1.31 g of Sr and 8.24 g of Ba can be determined with an error lower than 6%.

---

Zusammenfassung Zur Trennung und Bestimmung von Ca, Sr und Ba im Mikromaßstab wird die Ringofen-Technik empfohlen. Die drei Elemente werden dabei zunächst in die Nitrate übergeführt und Ca mit Äther-Alkohol ausgewaschen. Sr und Ba werden anschließend mit Diäthyldithiocarbamidat behandelt und Sr mit Äther-Alkohol abgetrennt. Die Identifizierung erfolgt mit Pyrogallol (Ca) bzw. Rhodizonat (Sr, Ba). Durch Vergleich mit Standardproben ist eine quantitative Bestimmung möglich. Hierbei können noch 0,60 g Ca, 1,31 g Sr und 8,24 g Ba mit einem Fehler < 6% erfaßt werden.

     

Transition metal complexes of 5-chlorouracil

Summary Complexes of 5-chlorouracil (5-ClU) (1) with 3d metal ions were characterized by elemental analysis, various spectroscopic methods (i.r., u.v. spectroscopy) and magnetic susceptibility measurements. The spectral evidence suggest that 5-ClU behaves as bidentate ligand in Ni^II, Cu^II, Zn^II, and Cd^II compounds, coordinating through its one carbonyl oxygen and one nitrogen whereas with Mn^II and Co^II it coordinates through the carbonyl oxygen only. The insolubility of the new complexes in organic solvents suggests that these are polymeric except for the Co^II complex which is soluble in pyridine. There is probable OH bridging in the Mn^II and Cu^II complexes and the 5-ClU may bridge in the rest.     

A modified ring electrographic method for the non-destructive analysis of metallic artefacts

Summary The utility of the ring electrographic technique as a non-destructive method of analysis of metallic artefacts of archeological importance is sufficiently accurate to give archeological meaningful results The electrographic sampling technique has been modified to give easier and more reliable sampling. The method is of particular value in the analysis of copper and silver coins.

---

Eine modifizierte elektrograpbische Ring-Methode zur Analyse metallischer Kunstgegenstände ohne deren Verletzung

Zusammenfassung Die Verwendbarkeit der elektrographischen Ring-Technik für die Analyse metallischer Gegenstände von archäologischem Interesse wurde erwiesen. Die elektrographische Probenahme wurde modifiziert. Das Verfahren ist für die Analyse von Kupfer- und Silbermünzen von besonderem Wert.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

Simple and mixed complexes of cobalt(II) and cobalt(III) ions

Summary Bivalent and trivalent cobalt complexes with 1-(2-pyridylazo)-2-naphthol (PAN), PAN+1, 10-phenanthroline and PAN+2, 2-bipyridyl were prepared and characterized by physico-chemical and magnetic measurements. The spectral studies suggest that PAN behaves as a bidentate ligand and is coordinated to metal ions through oxygen and (pyridine) nitrogen, whereas 1, 10-phenanthroline and 2, 2-bipyridyl are coordinated through (pyridine) nitrogen. The tentative (M–O) and (M–N) band assignments in the lower i.r. region, and magnetic moment data favour four coordination for the complexes studied.     

LC–MS Simultaneous Determination of Itopride Hydrochloride and Domperidone in Human Plasma

A rapid, simple, sensitive and specific liquid chromatography–tandem mass spectrometry method was developed and validated for simultaneous quantification of itopride hydrochloride and domperidone in human plasma. Both drugs were extracted by liquid–liquid extraction with ethyl acetate and saturated borax solution. The chromatographic separation was performed on a reversed-phase C18 column with a mobile phase of water–methanol (2:98, v/v) containing 0.5% formic acid. The protonated analyte was quantitated in positive ionization by multiple reaction monitoring with a mass spectrometer. The assay exhibited linearity over the concentration range of 3.33–500 ng mL⁻¹ for itopride hydrochloride and 3.33–100 ng mL⁻¹ for domperidone in human plasma. The precursor to product ion transitions of m/z 359.1–72.3 and 426.0–147.2 were used to measure itopride hydrochloride and domperidone respectively. The method was found suitable for the analysis of plasma samples collected during phase 1 pharmacokinetics study of itopride HCl 50 mg and domperidone 20 mg in 12 healthy volunteers after single oral doses of the combination drug.

     

Raman fingerprint of the interaction of K+ with the COO− group of zwitterionic alanine

The interaction of K⁺ with the zwitterionic form of alanine (ZAla) is investigated using Raman spectroscopy and density functional theory calculations. The Raman spectra of an aqueous solution of Ala and its mixture with KOH at different molar concentrations [ZAla + xKOH, x = 1–5 M] have been recorded in the spectral region 400–1800 cm⁻¹. The wavenumber position of the band at ~529 cm⁻¹ shows a red shift of 14 cm⁻¹, while the Raman band at ~634 cm⁻¹ shows a blue shift of 10 cm⁻¹ with the increasing x from 1 to 5 M. The intensity ratio I₆₃₄/I₅₂₉ is increased with increasing x, and it could be because of the increase in concentration of the [ZAla + K⁺] complex in the solution. The new Raman band appeared at ~1079 cm⁻¹ in the Raman spectra of [ZAla + xKOH, x = 1–5] complex. To determine the most probable site for the interaction of K⁺ with ZAla, the structures of ZAla and the [ZAla + K⁺] were optimized at B3LYP/6‐311++G(d,p) level of theory. The electrostatic potential calculation carried out for ZAla reveals that the maximum density of electron is lying over COO⁻, and therefore, COO⁻ would be the most probable site for the interaction of K⁺ with ZAla. The theoretically calculated Raman spectra of ZAla, [ZAla + K⁺] and the [ZAla⁻ + K⁺] are in good agreement with experimentally observed Raman spectra. Thus, the Raman bands at ~529, 634, and 1079 cm⁻¹ may be used as the Raman fingerprint for the interaction of K⁺ with COO⁻ of the ZAla and ZAla⁻. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of a cell-permeable near-infrared fluorescent deoxyglucose analogue for cancer cell imaging

We report the synthesis and characterization of a novel NIR fluorescent deoxyglucose analogue, CyNE 2-DG. Experiments in different cell lines showed a preferential uptake of CyNE 2-DG in cancer cells and its effective competition with unlabeled d-glucose. Cell imaging experiments demonstrated the superior cell-permeability of CyNE 2-DG over the NIR standard IRDye 800CW 2-DG, and validated its application for cancer cell imaging in the NIR region.     

Heat load of a GaAs photocathode in an SRF electron gun

A great deal of effort has been made over the last decades to develop a better polarized electron source for high energy physics. Several laboratories operate DC guns with a gallium arsenide photocathode, which yield a highly polarized electron beam. However, the beam's emittance might well be improved by using a superconducting radio frequency (SRF) electron gun, which delivers beams of a higher brightness than that from DC guns because the field gradient at the cathode is higher. SRF guns with metal and CsTe cathodes have been tested successfully. To produce polarized electrons, a Gallium-Arsenide photo-cathode must be used: an experiment to do so in a superconducting RF gun is under way at BNL. Since a bulk gallium arsenide (GaAs) photocathode is normal conducting, a problem arises from the heat load stemming from the cathode. We present our measurements of the electrical resistance of GaAs at cryogenic temperatures, a prediction of the heat load and verification by measuring the quality factor of the gun with and without the cathode at 2 K. We simulate heat generation and flow from the GaAs cathode using the ANSYS program. By following the findings with the heat load model, we designed and fabricated a new cathode holder (plug) to decrease the heat load from GaAs.     

Broad Dual Emission by Codoping Cr3+ (d→d) and Bi3+ (s→p) in Cs2Ag0.6Na0.4InCl6 Double Perovskite

A phosphor emitting both white light and broad near-infrared (NIR) radiation can simultaneously provide visual inspection and early signs of rotting of food products. The broad NIR emission is absorbed by the vibrational overtones of water molecules present in food items, providing the non-invasive image contrast to assess the food freshness. Here we design a phosphor, namely, Cr³⁺-Bi³⁺-codoped Cs₂Ag_0.6Na_0.4InCl₆, that simultaneously emit warm white light and broad NIR (1000 nm) radiation with quantum yield 27 %. This dual emitter is designed by combining the features of s²-electron (Bi³⁺) and d³-electron (Cr³⁺) doping in a weak crystal field of the halide perovskite host. excitation of Bi³⁺, using a commercial 370 nm ultraviolet light-emitting-diodes (UV-LED), yields both the emissions. A fraction of the excited Bi³⁺ dopants emit the warm white light, and the other fraction transfers its energy non-radiatively to Cr³⁺. Then the Cr³⁺ de-excites emitting broad NIR emission. Temperature dependent (6.4–300 K) photoluminescence in combination with Tanabe-Sugano diagram show that the Cr³⁺ experiences a weak crystal field ( =2.2), yielding the NIR emission. As a proof of concept, we fabricated a panel containing 122 phosphor-converted LEDs, demonstrating its capability to inspect food products.