Side effects in measurements of selectivity coefficients of solid state ion selective electrodes

The influence of various factors such as solubility, the oxidation of the membrane, and the contamination of the solution, on the experimental values of the selectivity coefficients of solid state sulphide ion selective electrodes is discussed. A new method for the evaluation of very small selectivity coefficients, based on the addition of reagents forming complexes or insoluble salts with the main ion, is proposed. By means of this method, selectivity coefficients for silver, copper, cadmium and lead ion selective electrodes have been determined, which are in far better agreement with thermodynamic values than those described in the literature.     

Studies of organotin(IV)-orthoquinone systems

The primary process in the reaction of hexaphenylditin with various substituted orthoquinones (Q) is shown to involve attack by the quinone at a phenyl ligand. The intermediate thus formed decomposes to yield Ph₃Sn(SQ^·), where S(Q^·−) is the corresponding semiquinonate. Rearrangement of these species in solution gives rise to biradicals, while intramolecular electron transfer may lead to the formation and precipitation of Ph₂Sn(CAT), where CAT²⁻ is the corresponding substituted catecholate. The identification of these processes depends in part on electron paramagnetic resonance spectroscopy. The reaction of Ph₃SnCl or Ph₂SnCl₂ with Na(TBSQ^·) (TBSQ^·−=3,5-di-tert-butyl-orthobenzosemiquinonate) results in the formation of Ph₂Sn(TBSQ^·), which can undergo redistribution and intramolecular electron transfer, so that the solution chemistry of these latter systems is similar to that of the products of the Sn₂Ph₆+Q reaction.     

Changes in surface composition of Fe-Si-Cr-K oxide alkylation catalyst: the marked role of potassium ferrites

The influence of gas-phase methylation of phenol on the state of the Fe-Si-Cr-K oxide catalyst surface was investigated by thermodesorption of K atoms and ions. Changes in potassium desorption energies, as determined from Arrhenius-like plots, varied from 3.07 eV to 1.21 eV for the atoms and from 2.59 eV to 2.89 eV for ion desorption from the active and deactivated samples, respectively. The results were discussed in terms of transformation of the catalyst surface and formation of β-ferrite.     

Structures and energies of seleno derivatives of biuret.Ab Initio comparative studies of diselenobiuret, selenobiuret, and selenothiobiuret

Ab initio studies (LCAO-MO method) on conformers of three seleno derivatives of the biuret molecules diselenobiuret [I], selenobiuret [II], and selenothiobiuret [III] were carried out at the Hartree-Fock (HF) and MP2 levels. The molecular geometries of these species were fully optimized at the HF level and characterized by analysis of the harmonic vibrational frequencies using a split-valence triple-zeta basis set augmented by a set ofd polarization functions on heavy atoms andp polarization functions on hydrogen atoms [TZP(d, p)]. The total energies of the HF-optimized structures were calculated at the MP2 (frozen core) level using a larger TZP (2df, 2pd) basis set. The potential energy searches revealed a total of 11 minimum-energy conformers (assigned astrans-trans, trans-cis, cis-trans, andcis-cis) and seven transition-state species for the title molecules. The two predicted conformers for diselenobiuret (Ia=trans-trans andIc=cis-cis) are characterized byC ₂ and the third byC _s symmetry. For selenothiobiuret two forms (IIIa=trans-trans andIIId=cis-cis) possessC ₁ and two (IIIb=trans-cis andIIIc=cis-trans) possessC _s symmetries, respectively. For selenobiuret, four formsIIa=trans-trans (C₁),IIb=trans-cis (C _s),IIc=cis-trans (C ₁), andIId=cis-cis (C₁), were obtained as a result of gradient optimization. Comparison of the relative energies for the considered species indicated that thecis-trans forms are the most stable conformations for all three systems at both the HF and MP2 levels of theory.     

Discrete mechanics and its application to the solution of the n-body problem

A theory of discrete mechanics is developed based on the results of D. Greenspan. Discrete dynamical equations in an inertial frame, in a coordinate system related to some material point, and in a rotating frame are given and the consistency, stability, and convergence of the methods are studied and some numerical examples presented.     

Complexing equilibria and redox potentials in the system Ag(II)/Ag(I)-1,10-phenanthroline in propylene carbonate

Predominance areas of various equilibria were identified and complex formation constants of Ag(I) with 1,10-phenanthroline were determined as well as the solubility product of the complex salt for Ag(phen)₂ClO₄ in propylene carbonate. The solubility product of AgNO₃ in propylene carbonate was estimated. The value of the formal potential of the system Ag(phen) ₂ ²⁺ /Ag(phen) ₂ ⁺ inPC was determined by chronovoltammetry. Differences in the stability of analogous complexes in water andPC are discussed.

---

Die Gleichgewichtskonstante der Komplexierung und die Redoxpotentiale im System Ag(II)/Ag(I)-1,10-Phenantrolin in Propylencarbonat

Zusammenfassung Die Gebiete der Dominanz der einzelnen Gleichgewichte, die Bildungskonstanten ₁ und ₂ der Komplexe Ag(I) mit 1,10-Phenantrolin und der Wert des Löslichkeitsproduktes Ag(phen)₂ClO₄ in Propylencarbonat wurden bestimmt. Das Löslichkeitsprodukt von AgNO₃ in Propylencarbonat wurde abgeschätzt. Die Werte des formalen Potentials des Systems Ag(phen) ₂ ²⁺ /Ag(phen) ₂ ⁺ inPC wurden mit Hilfe cyclischer Voltametrie ermittelt. Es wurden weiterhin die Unterschiede in der Stabilität analoger Komplexe in Wasser und in Propylencarbonat diskutiert.

     

Preparation and photocatalytic properties of silica-supported fine CdS powders

Summary Silica-supported cadmium sulfide, highly active in hydrogen photogeneration from water-methanol-KOH solution, was prepared by sulfidation of Cd²⁺-impregnated SiO₂. The samples consisted of colloidal-size hexagonal crystallites of CdS on amorphous SiO₂. A blue shift of a light absorption edge was observed for the samples with lower CdS content.

---

Herstellung und photokatalytische Aktivität von feinen CdS-Pulvern auf SiO₂

Zusammenfassung Es wurde Cadmiumsulfid auf Kieselgel durch Sulfidierung von Cd²⁺-imprägniertem SiO₂ hergestellt, das eine außerordentliche Aktivität bei der Wasserstoff-Photogenerierung aus Wasser-Methanol-KOH-Lösungen zeigte. Der Katalysator bestand aus hexagonalen CdS-Kristalliten von kolloidalen Ausmaßen auf amorphem SiO₂. An Proben mit geringerem CdS-Gehalt wurde eine Blauverschiebung der Lichtabsorption an der Absorptionskante beobachtet.

     

Probability issues in molecular design: predictive and modeling ability in 3D-QSAR schemes

In the current work we investigated 3D-QSAR data by the use of the coupled leave-several-out (LSO) and leave-one-out (LOO) cross-validation (CV) procedures. We verified the above mentioned scheme using both simulated data and real 3D QSAR data describing a series of CoMFA steroids, heterocyclic azo dyes and styrylquinoline HIV integrase inhibitors. Unlike in standard analyses, this technique characterizes individual method not by a single performance metrics but screens a whole possible modeling space by sampling different molecules into the training and test sets, respectively. This allowed us for the discussion of the information included in the estimators validating cross-validation procedures, as well as the comparison of the efficiency of several 3D QSAR schemes, in particular, Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Surface Analysis (CoMSA). Moreover, it allows one to acquire some general knowledge about predictive and modeling ability in 3D QSAR method.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary     

Reduced-size polarized basis sets for calculations of molecular electric properties. IV. First-row transition metals

Recent studies of the perturbation-dependent basis sets have indicated the possibility of a significant reduction of the size of the usual CGTO sets without considerable loss of accuracy in calculations of molecular electric properties. The resulting (ZPolX) basis sets have been developed for several atoms of the first and second row of the Periodic Table. The same method of the ZPolX basis set generation is extended for the first-row transition metals and the corresponding contracted ZPolX basis sets of the size [6s5p3d1f] are determined for both nonrelativistic and scalar relativistic calculations. The performance of the ZPolX basis sets is verified in calculations on the first-row transition metal oxides at the level of the ROHF, ROHF/CASPT2, and ROHF/CCSD(T) approximations. Also the study of the dipole polarizability of TiCl₄ confirms the excellent features of these very compact basis sets. The ZPolX basis sets for nonrelativistic and relativistic calculations of molecular electric properties are available on the web page http://www.chem.uni.torun.pl/zchk/basis-sets.html.