Formation of Highly Aligned Collagen Nanofibers by Continuous Cyclic Stretch of a Collagen Hydrogel Sheet

A collagen sheet with highly aligned collagen fibers is fabricated by continuous cyclic stretch. The rearrangement of the collagen fibers depends on the different process parameters of the cyclic stretch, including magnitude, frequency, and period of stretch. The collagen fibers are aligned perpendicularly to the direction of the stretch. Corneal stromal cells and smooth muscle cells cultivated on the highly aligned collagen sheet show alignment along the collagen fibers without the stretch during culture. Thus, the sheet can be a suitable scaffold for use in regenerative medicine.

     

Effective esterification of carboxylic acids using (6-oxo-6H-pyridazin-1-yl)phosphoric acid diethyl ester as novel coupling agents

(6-Oxo-6H-pyridazin-1-yl)phosphoric acid diethyl esters (3) are efficient and selective coupling agents for equimolar esterification of carboxylic acids and alcohols. Esterification of aliphatic and aromatic carboxylic acids with aliphatic and aromatic alcohols using 3 afforded the corresponding esters chemoselectively in good to excellent yield.     

Dual colorimetric sensoring bis(indolyl)calix[4]crown-6

Calix-chromophore, bis(indolyl)calix[4]crown-6 (1) in an oxidized form showing selective colorimetric changes for both alkaline earth cations and F⁻ in CH₃CN, has been newly synthesized. It is observed that the binding ability of 1 for the Ca²⁺ binding enhances in the presence of F⁻. Compound 1 can operate three independent combinational NOR logic gates toward metal cations and anions.     

Microfluidic cell disruption system employing a magnetically actuated diaphragm

A microfluidic cell lysis chip equipped with a micromixer and SPE unit was developed and used for quantitative analysis of intracellular proteins. This miniaturized sample preparation system can be employed for any purpose where cell disruption is needed to obtain intracellular constituents for the subsequent analysis. This system comprises a magnetically actuated micromixer to disrupt cells, a hydrophobic valve to manipulate the cell lysate, and a packed porous polymerized monolith chamber for SPE and filtering debris from the cell lysate. Using recombinant Escherichia coli expressing intracellular enhanced green fluorescent protein (EGFP) and lipase as model bacteria, we optimized the cell disruption condition with respect to the lysis buffer composition, mixing time, and the frequency of the diaphragm in the micromixer, which was magnetically actuated by an external magnetic stirrer in the micromixer chamber. The lysed sample prepared under the optimal condition was purified by the packed SPE in the microfluidic chip. At a frequency of 1.96 Hz, the final cell lysis efficiency and relative fluorescence intensity of EGFP after the cell disruption process were greater than 90 and 94%, respectively. Thus, this microfluidic cell disruption chip can be used for the efficient lysis of cells for further analysis of intracellular contents in many applications.     

Spectroscopic investigation of cationic comb-type copolymers/DNA interaction: interpolyelectrolyte complex enhancement synchronized with DNA hybridization

We have demonstrated that cationic comb-type copolymers consisting of a polycation backbone and abundant grafts of water-soluble polymers stabilize DNA hybrids. Furthermore, the copolymers were found to accelerate strand exchange reaction between a double-stranded DNA and its complementary single-stranded DNA. In this article, we investigated the effects of PLL-g-Dex on base pairs of a self-complementary DNA octamer, d(GGAATTCC). The soluble interpolyelectrolyte complex (IPEC) between the DNA and copolymer allowed us to characterize the complex by using spectroscopic methods under physiological ionic condition. Chemical shifts of nucleobase proton signals were not changed by PLL-g-Dex. Furthermore, the copolymer slightly changed the von't Hoff DeltaH accompanying the helix-coil transition of the octamer. These results indicated that the base pairs of the duplex DNA in the IPEC were not perturbed by the polycationic copolymer. It was obviously shown by temperature dependencies of proton and phosphorus NMR spectra that DNA/copolymer interaction was considerably enhanced in response to ds DNA formation. An increase in the density and total number of DNA negative charges upon hybrid formation likely caused the higher affinity of the copolymer with the ds form over that of the copolymer with the ss form. The IPEC formation of CCCs with DNA, however, seems highly sensitive to the coil-helix transition of the DNA.     

Scope and mechanism of the intermolecular addition of aromatic aldehydes to olefins catalyzed by Rh(I) olefin complexes

Rhodium (I) bis-olefin complexes Cp*Rh(VTMS)(2) and CpRh(VTMS)(2) (Cp* = C(5)Me(5), Cp = C(5)Me(4)CF(3), VTMS = vinyl trimethylsilane) were found to catalyze the addition of aromatic aldehydes to olefins to form ketones. Use of the more electron-deficient catalyst CpRh(VTMS)(2) results in faster reaction rates, better selectivity for linear ketone products from alpha-olefins, and broader reaction scope. NMR studies of the hydroacylation of vinyltrimethylsilane showed that the starting Rh(I) bis-olefin complexes and the corresponding Cp*/Rh(CH(2)CH(2)SiMe(3))(CO)(Ar) complexes were catalyst resting states, with an equilibrium established between them prior to turnover. Mechanistic studies suggested that CpRh(VTMS)(2) displayed a faster turnover frequency (relative to Cp*Rh(VTMS)(2)) because of an increase in the rate of reductive elimination, the turnover-limiting step, from the more electron-deficient metal center of CpRh(VTMS)(2). Reaction of Cp*/Rh(CH(2)CH(2)SiMe(3))(CO)(Ar) with PMe(3) yields acyl complexes Cp*/Rh[C(O)CH(2)CH(2)SiMe(3)](PMe(3))(Ar); measured first-order rates of reductive elimination of ketone from these Rh(III) complexes established that the Cp ligand accelerates this process relative to the Cp* ligand.     

Selective synthesis combined with chemical separation of single-walled carbon nanotubes for chirality selection

Single-walled carbon nanotubes (SWNTs) are potential materials for future nanoelectronics. Since the electronic and optical properties of SWNTs strongly depend on tube diameter and chirality, obtaining SWNTs with narrow (n,m) chirality distribution by selective growth or chemical separation has been an active area of research. Here, we demonstrate that a new, bimetallic FeRu catalyst affords SWNT growth with narrow diameter and chirality distribution in methane CVD. At 600 degrees C, methane CVD on FeRu catalyst produced predominantly (6,5) SWNTs according to UV-vis-NIR absorption and photoluminescence excitation/emission (PLE) spectroscopic characterization. At 850 degrees C, the dominant semiconducting species produced are (8,4), (7,6), and (7,5) SWNTs, with much narrower distributions in diameter and chirality than materials grown by other catalysts. Further, we show that narrow diameter/chirality growth combined with chemical separation by ion exchange chromatography (IEC) greatly facilitates achieving single (m,n) SWNT samples, as demonstrated by obtaining highly enriched (8,4) SWNTs with near elimination of metallic SWNTs existing in the as-grown material.     

Deposition of CuInS2 thin films using copper- and indium/sulfide-containing precursors through a two-stage MOCVD method

Copper indium disulfide (CuInS2; CIS) films were deposited on various substrates by two-stage metal-organic chemical vapor deposition (MOCVD) at relatively mild conditions, using Cu- and In/S-containing precursors without toxic H2S gas: first, a pure Cu thin film was prepared on glass or indium/tin oxide glass substrates by using a single-source precursor, bis(ethylbutyrylacetato)copper(II) or bis(ethylisobutyrylacetato)copper(II); second, on the resulting Cu film, tris(N,N-ethylbutyldithiocarbamato)indium(III) was treated to produce CIS films by a MOCVD method at 430 degrees C. In this process, their thicknesses and stoichiometries were found to be elaborately controlled on demand by adjusting the process conditions. The optical band gap of the stoichiometric CIS film was about 1.41 eV, which is in the near-optimal range for harvesting solar radiation energy.     

Mo16O53F2]12-: a new polyoxofluoromolybdate anion

Single crystals of a new beta-octamolybdate salt containing protonated 1,4-diazabicyclo[2.2.2]octane cations were prepared under mild hydrothermal conditions. This compound, [C6H13N2]2[C6H14N2][Mo8O26], was then used as a starting material in the synthesis of [C6H13N2]6[Mo16O53F2].4H2O, which contains previously unreported [Mo16O53F2]12- anions. The structure-directing properties of gamma-[Mo8O26]4-, a likely intermediate in this pH-dependent transformation, are responsible for the site selection of the fluoride incorporation. [Mo16O53F2]12-, the largest reported polyoxofluoromolybdate cluster, expands upon the limited number of such anions in the literature. The structures of both compounds were determined using single-crystal X-ray diffraction.     

Synthetic, crystallographic, computational, and biological studies of 1,4-difluorobenzo[c]phenanthrene and its metabolites

1,4-Difluorobenzo[c]phenanthrene (1,4-DFBcPh) and its putative metabolites, the dihydrodiol and diol epoxides, have been synthesized and structurally characterized, and the extent of DNA binding by the metabolites has been assessed. 1,4-DFBcPh and 1,4-difluoro-10-methoxybenzo[c]phenanthrene were prepared by photochemical cyclization of appropriate naphthylphenylethylenes. The dihydrodiol was synthesized from 1,4-difluoro-10-methoxybenzo[c]phenanthrene, and the diol epoxides were diastereoselectively synthesized from the dihydrodiol. Interesting differences were noted in 1H NMR spectra of the series 1 (syn) diol epoxides of benzo[c]phenanthrene (BcPh) and 1,4-DFBcPh; the BcPh diol epoxide displays a quasi-diequatorial orientation of the hydroxyl groups, but in the 1,4-DFBcPh case these are diaxially disposed. This difference probably stems from the presence of the fjord-region fluorine atom in 1,4-DFBcPh. A through-space, fjord-region H-F coupling has also been observed for 1,4-DFBcPh and its derivatives. Comparative X-ray crystallographic analyses of BcPh and 1,4-DFBcPh and their dihydrodiols show that introduction of fluorine increases the molecular distortion by about 6-7 degrees . As a guide to estimating the molecular distortion and its effects, and for comparison with the X-ray structures in known cases, optimized structures of BcPh, 1,4-DFBcPh, and 1,4-DMBcPh (the dimethyl analogue) as well as their dihydrodiols and diol epoxides were computed. Relative aromaticities of these compounds were assessed by nucleus-independent chemical shift calculations, and 13C NMR chemical shifts were computed by gauge-inducing atomic orbital calculations. 1,4-DFBcPh and its dihydrodiol were subjected to metabolism, and the amount of DNA binding in human breast cancer MCF-7 cells was assessed. The extent of DNA binding was then compared with that for BcPh and its dihydrodiol and the potent carcinogen benzo[a]pyrene. The 1,4-DFBcPh series 2 (anti) diol epoxide-derived DNA adducts were also compared with those arising from intracellular oxidation of the dihydrodiol with subsequent DNA binding. These experiments showed that increased molecular distortion decreased metabolic activation to the terminal metabolites but that diol epoxide metabolites that are formed are the DNA-damaging species.