Gold Spherical and Flake Assemblies Fabrication Through Calcination of Gold Nanoparticles Incorporated Poly(acrylonitrile) Nanofibers

Journal of Cluster Science - This work reports on the outcome of the calcination of gold nanoparticles incorporated polyacrylonitrile nanofibers in air which results in the formation of gold...     

Highly functionalized pyrazolines from symmetric and asymmetric 1,2-disulfonylhydrazines: a combination of experimental and DFT perspectives

Chemistry of Heterocyclic Compounds - In this work, new pyrazole derivatives were prepared by one-pot three-component reaction emloying symmetric and asymmetric 1,2-disulfonyl-hydrazines,...     

Experimental Investigation of Natural Convection in Inclined Channel in Presence of Electrostatic Field

The influence of external electrohydrodynamic forces on natural convection from a flat plate has been studied. Temperature distribution in the aforementioned channel at α = 45°, 90°, and 150° angles in different 10-, 12-, and 15-kV electrostatic fields has been reviewed. Corona wind and the shape of the created vortex by electrohydrodynamics were detected. The results showed that heat transfer was enhanced by increasing the electrostatic field in all angles. In the presence of the field, enhancement of heat transfer of the plate at acute angles is better than for obtuse ones. The optimal angle in terms of heat transfer was 45°, noting heat transfer improvement by 61%.     

Horizon structure of rotating Bardeen black hole and particle acceleration

We investigate the horizon structure and ergosphere in a rotating Bardeen regular black hole, which has an additional parameter (g) due to the magnetic charge, apart from the mass (M) and the rotation parameter (a). Interestingly, for each value of the parameter g, there exists a critical rotation parameter (\(a=a_{E}\)), which corresponds to an extremal black hole with degenerate horizons, while for \(a<a_{E}\) it describes a non-extremal black hole with two horizons, and no black hole for \(a>a_{E}\). We find that the extremal value \(a_E\) is also influenced by the parameter g, and so is the ergosphere. While the value of \(a_E\) remarkably decreases when compared with the Kerr black hole, the ergosphere becomes thicker with the increase in g. We also study the collision of two equal mass particles near the horizon of this black hole, and explicitly show the effect of the parameter g. The center-of-mass energy (\(E_\mathrm{CM}\)) not only depend on the rotation parameter a, but also on the parameter g. It is demonstrated that the \(E_\mathrm{CM}\) could be arbitrarily high in the extremal cases when one of the colliding particles has a critical angular momentum, thereby suggesting that the rotating Bardeen regular black hole can act as a particle accelerator.     

The importance of electron correlation in graphene and hydrogenated graphene

Local density approximation (LDA) and Green function effective Coulomb (GW) calculations are performed to investigate the effect of electronic correlations on the electronic properties of both graphene and graphane. The size of band gap in graphane increases from 3.7 eV in LDA to 4.9 eV in GW approximation. By calculating maximally localized Wannier wave functions, we evaluate the necessary integrals to get the Hubbard U and the exchange J interaction from first principles for both graphene and graphane. Our ab-initio estimates indicate that in the case of graphene, in addition to the hopping amplitude t ～ 2.8 eV giving rise to the Dirac nature of low lying excitations, the Hubbard U value of ～8.7 eV gives rise to a super-exchange strength of J _AFM ～ 3.5 eV. This value dominates over the direct (ferromagnetic) exchange value of J _FM ～ 1.6 eV. This brings substantial Mott-Heisenberg aspects into the problem of graphene. Moreover, similarly large values of the Hubbard and super-exchange strength in graphane suggests that the nature of gap in graphane has substantial Mott character.     

Effect of self-fields on the electron cyclotron maser instability in a dielectric loaded waveguide

The influence of self-fields on the cyclotron maser instability in a hollow electron beam propagating parallel to a uniform axial magnetic field B ₀ ê _z in a dielectric loaded waveguide is investigated. The theoretical analysis is carried out within the framework of linearized Vlasov-Maxwell equations. It is assumed that the beam is thin with the radial thickness much smaller than the beam radius. A new dispersion relation for azimuthally symmetric electromagnetic perturbation is derived and analyzed numerically. The influence of self-fields on the cyclotron maser instability in a dielectric loaded waveguide for different dielectric medium is studied. It is found that unlike the hollow waveguide the growth rate is increased by increasing self-fields. The instability band width decreases due to the increasing self-fields. The maximum growth rate increases gradually as self-fields increase as regards a different dielectric medium.     

Electropolymerized coatings of poly(o‐anisidine) and poly(o‐anisidine)‐TiO2 nanocomposite on aluminum alloy 3004 by using the galvanostatic method and their corrosion protection performance

Poly(o‐anisidine) (POA) and poly(o‐anisidine)‐TiO₂ (POA‐TiO₂) nanocomposite coatings on aluminum alloy 3004 (AA3004) have been investigated by using the galvanostatic method. The electrosynthesized coatings were characterized by FT ‐ IR spectroscopy, XRD, SEM ‐ EDX and SEM. The corrosion protection performance of POA and POA‐TiO₂ nanocomposite coatings was investigated in the 3.5% NaCl solution by using potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results show that the corrosion rate of the nanocomposite coatings is about 900 times lower than the bare AA3004 under optimal conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Heat transfer and rheological properties of transformer oil-oxidized MWCNT nanofluid

Power transformers play a key role in power and electrical industries and thus boosting their efficiency is necessary. In this study, the effect of oxidized multi-walled carbon nanotubes on transformer oil thermophysical properties was experimentally investigated. The maximum amount of carbon nanotubes was chosen up to 0.01 mass% to assure the maximum purity of transformer oil. Heat transfer characteristics of transformer oil and nanofluids in two cases of free and forced convection were studied. Breakdown voltage, flash point, pour point, density, electrical and thermal conductivities, viscosity and shear stress, as eight important quality parameters, were determined. According to the experimental results, the Breakdown voltage decreased through concentration increasing. Electrical conductivity is not changed considerable with increasing concentration and temperature. Thermal conductivity of nanofluids and transformer oil changed with increasing temperature and concentration. Furthermore, at all concentrations and temperatures, the viscosity of the nanofluids was lower than that of transformer oil.     

Enantioselective Synthesis of Boron‐Substituted Quaternary Carbon Stereogenic Centers through NHC‐Catalyzed Conjugate Additions of (Pinacolato)boron Units to Enones

The first examples of Lewis base catalyzed enantioselective boryl conjugate additions (BCAs) that generate products containing boron‐substituted quaternary carbon stereogenic centers are disclosed. Reactions are performed in the presence of 1.0–5.0 mol % of a readily accessible chiral accessible N‐heterocyclic carbene (NHC) and commercially available bis(pinacolato)diboron; cyclic or linear α,β‐unsaturated ketones can be used and rigorous exclusion of air or moisture is not necessary. The desired products are obtained in 63–95 % yield and 91:9 to >99:1 enantiomeric ratio (e.r.). The special utility of the NHC‐catalyzed approach is demonstrated in the context of an enantioselective synthesis of natural product antifungal (?)‐crassinervic acid.     

Modulable and Highly Diastereoselective Carbometalations of Cyclopropenes

The copper‐catalyzed carbomagnesiation reaction of cyclopropenyl esters 1 leads to various substituted cyclopropanes species 3 in good yields with very high diastereoselectivities. The reaction proceeds through a syn‐chelated carbomagnesiation reaction and could be extended to various cyclopropenylmethyl ester derivatives 5 . The potential of this approach was illustrated by the preparation of two consecutive all‐carbon quaternary stereocenters. However, the carbometalation reaction needs to be performed at temperature ranging from ?35 to ?20 °C to avoid subsequent fragmentation reaction into stereodefined β,γ‐nonconjugated unsaturated esters 4 . Alternatively, the carbocupration reaction with organocopper species could also be performed to leads to configurationally stable cyclopropyl copper species 2[Cu] . Additionally, when the Lewis acid character of the copper center is decreased (i.e., RCuCNLi), the reaction proceed with an anti‐selectivity. The diastereodivergent behavior of these organometallic species is of synthetic interest, since both diastereomers syn‐ 3 and anti‐ 3 can be obtained, at will, from the same precursor cyclopropenyl esters 1 .