HPLC Determination of Letrozole in Plasma Using Fluorescence Detection: Application to Pharmacokinetic Studies

A simple, rapid and sensitive HPLC method has been developed and validated for the analysis of letrozole in human plasma. The separation was achieved on a monolithic silica column using acetonitrile–phosphate buffer. A fluorescence detector was used for the quantitation with excitation and emission wavelengths at 230 and 295 nm. The assay enables the measurement of letrozole for therapeutic drug monitoring with a minimum quantification limit (LOQ) of 0.5 ng mL^?1. The method involves a simple, one-step extraction procedure with complete recovery. Calibration was linear over the concentration range 0.5–80 ng mL^?1. The coefficients of variation for inter-day and intra-day assay were found to be less than 8%.     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Density functional theory study of the Fourier transform infrared and Raman spectra of Cu(II) bis-acetylacetone

Fourier transform infrared and Fourier transform Raman spectra of Cu(II) bis-acetylacetone have been obtained. The geometry, frequency and intensity of the vibrational bands of this compound and its 1,5-(13)C(2), 3-(13)C, 1,3,5-(13)C(3), 2,4-(13)C(2), (18)O(2) and 2,4-(13)C(2)-(18)O(2) derivatives were obtained by the density functional theory (DFT) with the B3LYP functional and using the 6-31G(*) and 3-21G(*) basis sets. The calculated frequencies are compared with the solid infrared and Raman spectra. All the measured infrared and Raman bands were interpreted in terms of the calculated vibrational modes. The percentage of deviation of the bond lengths and bond angles gives a good picture of the normal modes, and serves as a basis for the assignment of the wavenumbers. Most computed bands are predicted to be at higher wavenumbers than the experimental bands. The calculated geometrical parameters show slight differences compared with the experimental results. These differences can be explained by the different physical state of Cu(II) bis-acetylacetone. The DFT-B3LYP calculations assumed a free molecule in the gas phase. Analysis of the vibrational spectra indicates a strong coupling between the chelated ring modes.     

Strong Structural and Electronic Binding of Bovine Serum Albumin to ZnO via Specific Amino Acid Residues and Zinc Atoms

ZnO biointerfaces with serum albumin have attracted noticeable attention due to the increasing interest in developing ZnO-based materials for biomedical applications. ZnO surface morphology and chemistry are expected to play a critical role on the structural, optical, and electronic properties of albumin-ZnO complexes. Yet there are still large gaps in the understanding of these biological interfaces. Herein we comprehensively elucidate the interactions at such interfaces by using atomic force microscopy and nanoshaving experiments to determine roughness, thickness, and adhesion properties of BSA layers adsorbed on the most typical polar and non-polar ZnO single-crystal facets. These experiments are corroborated by force field (FF) and density-functional tight-binding (DFTB) calculations on ZnO-BSA interfaces. We show that BSA adsorbs on all the studied ZnO surfaces while interactions of BSA with ZnO are found to be considerably affected by the atomic surface structure of ZnO. BSA layers on the surface have the highest roughness and thickness, hinting at a specific upright BSA arrangement. BSA layers on surface have the strongest binding, which is well correlated with DFTB simulations showing atomic rearrangement and bonding between specific amino acids (AAs) and ZnO. Besides the structural properties, the ZnO interaction with these AAs also controls the charge transfer and HOMO-LUMO energy positions in the BSA-ZnO complexes. This ZnO facet-specific protein binding and related structural and electronic effects can be useful for improving the design and functionality of ZnO-based materials and devices.     

A longitudinal study of evolving networks in response to natural disaster

In this study, we present a longitudinal analysis of the evolution of interorganizational disaster coordination networks (IoDCNs) in response to natural disasters. There are very few systematic empirical studies which try to quantify the optimal functioning of emerging networks dealing with natural disasters. We suggest that social network analysis is a useful method for exploring this complex phenomenon from both theoretical and methodological perspective aiming to develop a quantitative assessment framework which could aid in developing a better understanding of the optimal functioning of these emerging IoDCN during natural disasters. This analysis highlights the importance of utilizing network metrics to investigate disaster response coordination networks. Results of our investigation suggest that in disasters the rate of communication increases and creates the conditions where organizational structures need to move at that same pace to exchange new information. Our analysis also shows that inter-organizational coordination network structures are not fixed and vary in each period during a disaster depending on the needs. This may serve the basis for developing preparedness among agencies with an improved perspective for gaining effectiveness and efficiency in responding to natural disasters.     

Host–Guest Assembly of a Molecular Reporter with Chiral Cyanohydrins for Assignment of Absolute Stereochemistry

The absolute stereochemistry of cyanohydrins, derived from ketones and aldehydes, is obtained routinely, in a microscale and derivatization‐free manner, upon their complexation with Zn‐MAPOL, a zincated porphyrin host with a binding pocket comprised of a biphenol core. The host–guest complex leads to observable exciton‐coupled circular dichroism (ECCD), the sign of which is easily correlated to the absolute stereochemistry of the bound cyanohydrin. A working model, based on the ECCD signal of cyanohydrins with known configuration, is proposed.     

Synthesis of novel fluorene-functionalised nanoporous silica and its luminescence behaviour in acidic media

Fluorene-functionalised nanoporous silica (FL-NH₂-SBA-15) was prepared using the post-synthesis grafting method of SBA-15. The material thus obtained was characterised by means of small- and wide-angle X-ray diffraction, nitrogen adsorption-desorption, Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and elemental analysis. The results showed that the organised structure is preserved after the post-grafting procedure. Surface area and pore-size decreased by attaching functional groups to the pore surface. In addition, the pore volume was reduced with functionalisation. The amount of fluorene grafted onto the surface of SBA-15 was 0.55 mmol with a yield of approximately 46 %. The emission spectra of FL-NH₂-SBA-15 in acidic media were studied and are discussed in detail. The structural change between FL-NH₂-SBA-15 and the protonated form might be an effective candidate for acid-dependent molecular-sensor models for advanced application in molecular sensors in the future.     

Investigation of the Electroreduction Behavior,Electroreduction Mechanism and Voltammetric Determination of Medetomidine on the Graphene Paste Electrode

This paper presents a method for the construction of a graphene paste electrode (GPE) from reduced graphene oxide (RGO). The GPE was successfully used for the determination of medetomidine. The influence of some experimental variables such as pH, supporting electrolyte, scan rate, and possible interferences were studied. Differential pulse voltammetric (DPV) peak currents of medetomidine increased linearly with its concentration in the range from 0.009 to 2.5 µM. The limit of detection (LOD) and limit of quantitation (LOQ) values for the determination of medetomidine were 2.8 and 9.2 nM, respectively. Also, for the first time, the electroreduction behavior of medetomidine was investigated.     

Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.