Erratum to: Several Articles in JETP Letters

JETP Letters - An Erratum to this paper has been published: https://doi.org/10.1134/S0021364022380015     

Effect of radial density gradient on dispersion of guided helicon mode

The effect of the radial density gradient on the dispersion of guided helicon mode is considered. For the parabolic density profile, the conditions under which the wave frequency is proportional to the axial wavenumber squared (ω ≈ k _z ² ) are obtained.     

On the mechanism of phase transformation in Ag2Se

A differential thermal analysis ΔT _y (T) in vacuum has been performed, and the temperature gradient ΔT _x (T) along the Ag₂Se sample during the transition α → β has been studied. It has been shown that the transitions α → α′ and β′ → β are displacive transitions and that the transition α′ → β′ is a reconstructive transition. It has been found that the temperature gradient along the sample during the transition α′ → β′ passes through a deep minimum due to a strong increase in the specific heat capacity.     

Stimulation of secondary negative ion emission by implantation of alkaline ions into the surface layer of a solid followed by heating

A new method of stimulating secondary negative ion emission is suggested that is based on implantation of alkaline ions into the surface layer of a solid with subsequent heating to a temperature providing optimal coverage of the surface (about half a monolayer) by activator (alkaline) ions. It is shown that, by appropriately selecting the implantation dose (10¹⁸–10¹⁹ cm⁻³) and surface temperature (500–900°C), one can reach such a degree of coverage of the sample surface by activator ions that its work function eφ becomes minimal: 1.9 eV for molybdenum and 2.1 eV for copper. It is found that, with the implantation (irradiation) dose and surface temperature chosen properly, one can, by means of outdiffusion of cesium atoms, achieve such a degree of surface coverage that remains unchanged during the continuous sputtering of the surface by a cesium ion beam.     

Optical Properties of Nonstoichiometric Tantalum Oxide TaO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> (<Emphasis Type="Italic">x</Emphasis> &lt; 5/2) According to Spectral-Ellipsometry and Raman-Scattering Data

Optical properties of amorphous nonstoichiometric tantalum-oxide films of variable composition (TaO_x, x = 1.94–2.51) in the spectral range of 1.12–4.96 eV, obtained by ion-beam sputtering-deposition of metallic tantalum at different partial oxygen pressures (0.53–9.09 × 10^–3 Pa), have been investigated. It is shown by spectral ellipsometry that the character of dispersion of the absorption coefficient and refractive index in TaO_x of variable composition suggests that light-absorbing films with dispersion similar to that in metals are formed at oxygen pressures in the growth chamber below 2.21 × 10^–3 Pa, whereas transparent films with dielectric dispersion are formed at pressures above 2.81 × 10^–3 Pa. According to the data of quantumchemical simulation, the absorption peak at a photon energy of 4.6 eV in TaO_x observed in the absorptioncoefficient dispersion spectrum is due to oxygen vacancy. The peak in the Raman-scattering spectra of TaO_x films with metallic dispersion at frequencies of 200–230 cm^–1 is presumably related to tantalum nanoclusters.     

Measurement of Angular Distributions of Gamma Rays from the Inelastic Scattering of 14.1-MeV Neutrons by Carbon and Oxygen Nuclei

The results obtained by measuring the angular and energy distributions of gamma rays originating from the inelastic scattering of 14.1-MeV neutrons by carbon and oxygen nuclei are presented. The measurements in question were performed by the tagged-neutron method in a beam of an ING-27 standard portable neutron generator. The angular distributions of gamma rays emitted by the 2⁺ state of ¹²С at 4.43 MeVand the 3^? state of ¹⁶O at 6.13 MeV were obtained.     

Effect of Frequency of the Alternating Electric Field on Temperature Impedance Spectra of LuFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Ceramic Multiferroic

Temperature impedance spectra are measured on LuFe₂O₄ ceramic multiferroics over a temperature range of 100–400 K, upon applying a sinusoidal voltage with a frequency varying between 20 Hz and 120MHz. At signal frequencies of 30–70 MHz, spectra exhibit features such as an abnormal positive temperature resistance coefficient within the temperature range of 200–260 K, which are interpreted in the context of the generalized barrier model.     

Microwave absorption in a Y1Ba2Cu3O7−x single crystal near the superconducting transition

Y₁Ba₂Cu₃O_7−x single crystals are investigated near T _c ≈92 K in fields 0<H⩽9 kOe using a modified ESR spectrometer. The temperature modulation method is used for the first time, together with the traditional magnetic modulation method, to detect microwave responses in single crystals. Superconducting-transition peaks shifted relative to one another in temperature and differing in shape are observed in the temperature dependence of the corresponding signals ∂R/∂H and ∂R/∂T (R — microwave absorption). The evolution of these peaks as a function of the field and the angle π between H and the c axis of the single crystal is traced. It is shown that the difference in the temperature dependences of the derivatives ∂R/∂H and ∂R/∂T is due to the broadening of the superconducting transition characteristic of HTSCs. Fiz. Tverd. Tela (St. Petersburg) 41, 14–17 (January 1999)