An investigation on surface tensions of Pb-free solder materials

Surface tensions of some Pb-free solder systems such as Ag–Bi–Sn with cross-sections Ag/Bi = 1/1, Ag/Bi = 1/2, Ag/Bi = 2/1, In–Sn–Zn with cross-sections Sn/In = 1/1, Sn/In = 1/3 and (Ag₇Cu₃)_100?x Sn_x with cross-section Ag/Cu = 7/3 are calculated from the sub-binary surface tension data using the models, such as the Muggianu, Kohler, Toop models, Butler’s equation and Chou’s General Solution Model (GSM) at 873, 923 and 1073 K, respectively. The surface tension of In–Sn–Zn increases wavily with increasing amount of Zn and it is found that the best models are the GSM for both cross-sections in question while GSM becomes the best model for (Ag₇Cu₃)_100?x Sn_x alloy in the whole experimental range. Moreover, the surface tension of (Ag₇Cu₃)_100?x Sn_x decreases slightly with increasing amount of Sn. The Muggianu, Butler and Butler models are determined as the best models for the cross-sections in the order given above for entire measurement range, respectively, and the surface tension of Ag–Bi–Sn decreases slightly with an increasing amount of Bi and Ag but increases with increasing Sn in liquid alloys.     

Multi-Center Vector Field Methods for Wave Equations

We develop the method of vector-fields to further study Dispersive Wave Equations. Radial vector fields are used to get a-priori estimates such as the Morawetz estimate on solutions of Dispersive Wave Equations. A key to such estimates is the repulsiveness or nontrapping conditions on the flow corresponding to the wave equation. Thus this method is limited to potential perturbations which are repulsive, that is the radial derivative pointing away from the origin. In this work, we generalize this method to include potentials which are repulsive relative to a line in space (in three or higher dimensions), among other cases. This method is based on constructing multi-centered vector fields as multipliers, cancellation lemmas and energy localization.     

Factors affecting the morphology of benzoyl peroxide microsponges

Benzoyl peroxide (BPO) is primarily used in the treatment of mild to moderate acne. However, its application is associated with skin irritation. It has been shown that encapsulation and controlled release of BPO could reduce the side effect while also reducing percutaneous absorption when administered to the skin. The aim of the present investigation was to design and formulate an appropriate encapsulated form of BPO, using microsponge technology, and explore the parameters affecting the morphology and other characteristics of the resultant products employing scanning electron microscopy (SEM). Benzoyl peroxide particles were prepared using an emulsion solvent diffusion method by adding an organic internal phase containing benzoyl peroxide, ethyl cellulose and dichloromethane into a stirred aqueous phase containing polyvinyl alcohol (PVA). Different concentrations of BPO microsponges were incorporated in lotion formulations and the drug release from these formulations were studied. The SEM micrographs of the BPO microsponges enabled measurement of their size and showed that they were spherical and porous. Results showed that the morphology and particle size of microsponges were affected by drug:polymer ratio, stirring rate and the amount of emulsifier used. The results obtained also showed that an increase in the ratio of drug:polymer resulted in a reduction in the release rate of BPO from the microsponges. The release data showed that the highest and the lowest release rates were obtained from lotions containing plain BPO particles and BPO microsponges with the drug:polymer ratio of 13:1, respectively. The kinetics of release study showed that the release data followed Peppas model and the main mechanism of drug release from BPO microsponges was diffusion.     

Solid-Phase Microextraction of Phthalate Esters from Aqueous Media by Functionalized Carbon Nanotubes (Graphene Oxide Nanoribbons) and Determination by GC–FID

Multiwalled carbon nanotubes were exposed to hydrothermal treatment for obtaining graphene oxide nanoribbons (GONRs). The fabricated graphene oxide nanoribbons have been morphologically and compositionally characterized via FE-SEM, XRD, and FT-IR techniques. The as-synthesized GONRs have been used as sorbent phase for headspace solid-phase microextraction of phthalate esters (PEs) from aqueous solutions. In this regard, the GC–FID analysis route has been used for quantification of PEs. The new SPME fiber shows remarkable analytical figures of merit including broad dynamic linear ranges, low limits of detection, as well as good stability and reasonable relative standard deviations for evaluation of PEs. The linearity of the method for analysis of PEs including DnBP, DnPP, DEHP, DEHA, BBP, and DMP was between the range of 0.05–100, 0.05–100, 0.1–100, 0.1–100, 0.2–100, and 0.5–100 μg L^?1, respectively. The limits of detection (based on S/N?=?3) and correlation coefficients were found to be in the range of 0.02–0.2 μg L^?1 and 0.9907–0.9952, correspondingly. The prepared GONR-coated SPME fiber shows larger extraction yield in comparison to pristine MWNTs and commercial PDMS SPME fibers. Furthermore, real sample analysis showed that there is no significant matrix effect for evaluation of PEs from environmental water samples and proposed method could be used for evaluation and determination of PEs from aqueous samples in a precise and accurate manner. The existence of functional groups, π–π interactions, as well as hydrogen bonding between adsorbent phase and PE analytes could be the reason for observing such a high extraction yield.

     

Novel silver(I)N-heterocyclic carbene complexes bearing 2-(4-hydroxyphenyl)ethyl group: Synthesis,characterization, and enzyme inhibition properties

Herein, novel silver-based N-heterocyclic carbene (NHC) complexes bearing 2-(4-hydroxyphenyl)ethyl group were synthesized. Novel Ag(I)NHC complexes were synthesized from the 2-(4-hydroxyphenyl)ethyl-substituted benzimidazolium salts and silver oxide via in situ deprotonation method. The successful formation of all Ag(I)NHC complexes was proved by using ¹H NMR, ¹³C NMR, FTIR spectroscopy, and elemental analysis techniques. In addition, their inhibitory effects have been investigated of these substances on acetylcholinesterase (AChE), α-glycosidase (α-Gly), human carbonic anhydrase I (hCA I), and human carbonic anhydrase II (hCA II) enzymes. It has been seen that all compounds have a better ability to inhibit compared with existing tried inhibitors. Among these, the best inhibitor against AChE enzyme is 1g (K_i : 9.54 ± 0.98 μM and IC₅₀ : 17.40), and against α-Gly, 1c showed the highest effect (K_i 3.09 ± 0.36 μM and IC₅₀ 7.91). The best inhibitor against hCA I and hCA II enzymes are 1c and 1g compounds. For hCA I and hCA II, IC₅₀ values were calculated as 17.85 and 9.06 μM and K_i values were measured as 5.45 ± 2.02 and 8.99 ± 2.02 μM, respectively.     

Convergent synthesis of carbonic anhydrase inhibiting bi-heterocyclic benzamides: Structure–activity relationship and mechanistic explorations through enzyme inhibition,kinetics, and computational studies

By using a convergent methodology, a novel series of N-arylated 4-yl-benzamides containing a bi-heterocyclic thiazole–triazole core was synthesized, and the structures of these hybrid molecules, 9a–k , were corroborated through spectral analyses. The in vitro studies of these multifunctional molecules demonstrated their potent carbonic anhydrase inhibition relative to the standard used. The kinetics mechanism was exposed by Lineweaver–Burk plots, which revealed that 9j inhibited carbonic anhydrase non-competitively by forming an enzyme-inhibitor complex. The inhibition constants K_i calculated from Dixon plots for this compound was 1.2 μM. The computational study was also persuasive with the experimental results, and these molecules disclosed good results of all scoring functions and interactions, which suggested a good binding to carbonic anhydrase. So, it was predicted from the inferred results that these molecules might be considered as promising medicinal scaffolds for various diseases related to the uncontrolled production of this enzyme.     

Hexamethylenetetramine-based ionic liquid anchored onto the metal–organic framework MIL-101(Cr) as a superior and reusable heterogeneous catalyst for the preparation of hexahydroquinolines

Research on Chemical Intermediates - Regarding the significance of medicinal and pharmacological sciences, we explored one-pot multicomponent reaction of aromatic aldehydes, aryl amines,...     

Firing-Induced Microstructural Properties of Quasi-Diamagnetic Carbonate-Based Porous Ceramics: a <Superscript>1</Superscript>H NMR Relaxation Correlation Study

This study deals with the application of two-dimensional proton nuclear magnetic resonance relaxometry (2D ¹H NMR-R) to the characterization of porous ceramics nearly free of magnetic compounds. Different microstructural properties were obtained by firing a diamagnetic mixture of kaolin, calcium, and magnesium carbonate over a wide range of maximum temperatures (600–1100 °C) and firing times at the maximum temperature (soaking times) (0–10 h). The 2D ¹H NMR-R method relies on the correlated measurement of ¹H longitudinal (T ₁) and transverse (T ₂) relaxation times of pore-filling water by which the properties of the interconnected pore space may be investigated. In the absence of significant magnetic susceptibility effect due to para- and ferro-magnetic compounds, the 2D ¹H NMR-R maps allow studying the conjoint effects on pore size distribution and inter-pore coupling due to the variations in both time and temperature of firing. The NMR experiments were performed with a low-field ¹H NMR sensor, which allows non-destructive and in situ analysis. For ceramic specimens fired at 600 and 700 °C, the fraction of smallest pores increases with firing time at the expenses of those with intermediate size. The pore shrinkage occurring at this stage, and likely associated with the transformation of kaolinite in metakaolinite, is affected in a similar way by soaking time and firing temperature, in line with the concept of equivalent firing temperature. At temperatures from 800 to 1100 °C, the structural modifications involving interconnectivity and average pore size are driven primarily by firing temperature and, secondarily, by soaking time. The 2D ¹H NMR-R results are confirmed by more traditional, but destructive, mineralogical, and structural analyses like X-ray powder diffraction, helium pycnometry, mercury intrusion porosimetry, and nitrogen adsorption/desorption method.