Generation of vortices by a streamwise oscillating cylinder

The wake of a streamwise oscillating cylinder is presently investigated. The Reynolds number investigated is 300, based on the cylinder diameterd. The cylinder oscillates at an amplitude of 0.5d and a frequencyf _e/f_s=1.8, wheref _e is the cylinder oscillating frequency andf _s is the natural vortex shedding frequency of a stationary cylinder. Under these conditions the flow is essentially two dimensional. A two-dimensional direct numerical simulation (DNS) scheme has been developed to calculate the flow. The DNS results display a street of binary vortices, each containing two counter-rotating vortical structures, symmetrical about the centerline, which is in excellent agreement with measurements. The drag and lift on the cylinder have been examined. The time averaged drag and lift are 1.4 and 0, respectively, which are the same as those on a stationary cylinder at the sameRe. However, the fluctuating drag was high, about 2.68. It has been found that, being symmetrically formed about the centerline, the binary vortices induce an essentially zero fluctuating lift, which may have a profound implication in flow control and engineering.     

Application of microbioreactors in fermentation process development: a review

Biotechnology process development involves strain testing and improvement steps aimed at increasing yields and productivity. This necessitates the high-throughput screening of many potential strain candidates, a task currently mainly performed in shake flasks or microtiter plates. However, these methods have some drawbacks, such as the low data density (usually only end-point measurements) and the lack of control over cultivation conditions in standard shake flasks. Microbioreactors can offer the flexibility and controllability of bench-scale reactors and thus deliver results that are more comparable to large-scale fermentations, but with the additional advantages of small size, availability of online cultivation data and the potential for automation. Current microbioreactor technology is analyzed in this review paper, focusing on its industrial applicability, and directions for future research are presented.     

Photodegradation of the pharmaceuticals amoxicillin, bezafibrate and paracetamol by the photo-Fenton process—Application to sewage treatment plant effluent

Photodegradation of the pharmaceuticals amoxicillin (AMX), bezafibrate (BZF) and paracetamol (PCT) in aqueous solutions via the photo-Fenton process was investigated under black-light and solar irradiation. The influences of iron source, initial H₂O₂ concentration and matrix (distilled water and sewage treatment plant effluent) on degradation efficiency were discussed in detail. The results showed that (i) the degradation of the drugs was favored in the presence of potassium ferrioxalate (FeOx) in comparison to Fe(NO₃)₃; (ii) the increase of the H₂O₂ concentration improved the efficiency of AMX and BZF oxidation; however, the same was not observed for PCT; (iii) the influence of the matrix was observed for the degradation of BZF and PCT; (iv) under solar irradiation, the oxidation of the BZF and PCT is faster than under black-light irradiation. All these pharmaceuticals can be efficiently degraded employing the process evaluated.     

Synthesis and reactions of benzopentathiepin having hydroxyl group

The synthesis of benzopentathiepin having a hydroxyl group at the neighboring position of polysulfur ring was performed by demethylation of 6-ethyl-9-methoxybenzopentathiepin with hydrogenbromide. Benzotrithiole having hydroxyl group was not isolated at all. The hydroxyl group was also alkylated with alkyl iodide in the presence of weak base.     

Micellization and mixed micellization of cationic gemini (dimeric) surfactants and cationic conventional (monomeric) surfactants: Conductometric,dye solubilization,and surface tension studies

In the present study, we have investigated the self-association, mixed micellization, and thermodynamic studies of a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide (16-6-16)) and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of pure (16-6-16 and CTAB) and mixed (16-6-16+CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), A_min (the minimum area per surfactant molecule at the air/water interface), etc.) of micellar (16-6-16 or CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were evaluated. The thermodynamic parameters of the micellar (16-6-16 and CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were also evaluated.     

Structural characterization of methanol substituted lanthanum halides

The first study into the alcohol solvation of lanthanum halide [LaX₃] derivatives as a means to lower the processing temperature for the production of the LaBr₃ scintillators was undertaken using methanol (MeOH). Initially the de-hydration of {[La(μ-Br)(H₂O)₇](Br)₂}₂ (1) was investigated through the simple room temperature dissolution of 1 in MeOH. The mixed solvate monomeric [La(H₂O)₇(MeOH)₂](Br)₃ (2) compound was isolated where the La metal center retains its original 9-coordination through the binding of two additional MeOH solvents but necessitates the transfer of the innersphere Br to the outersphere. In an attempt to in situ dry the reaction mixture of 1 in MeOH over CaH₂, crystals of [Ca(MeOH)₆](Br)₂ (3) were isolated. Compound 1 dissolved in MeOH at reflux temperatures led to the isolation of an unusual arrangement identified as the salt derivative {[LaBr_2.75·5.25(MeOH)]^+0.25 [LaBr_3.25·4.75(MeOH)]^−0.25} (4). The fully substituted species was ultimately isolated through the dissolution of dried LaBr₃ in MeOH forming the 8-coordinated [LaBr₃(MeOH)₅] (5) complex. It was determined that the concentration of the crystallization solution directed the structure isolated (4 concentrated; 5 dilute) The other LaX₃ derivatives were isolated as [(MeOH)₄(Cl)₂La(μ-Cl)]₂ (6) and [La(MeOH)₉](I)₃·MeOH (7). Beryllium Dome XRD analysis indicated that the bulk material for 5 appear to have multiple solvated species, 6 is consistent with the single crystal, and 7 was too broad to elucidate structural aspects. Multinuclear NMR (¹³⁹La) indicated that these compounds do not retain their structure in MeOD. TGA/DTA data revealed that the de-solvation temperatures of the MeOH derivatives 4–6 were slightly higher in comparison to their hydrated counterparts.     

H(2) formation by electron irradiation of SBA-15 materials and the effect of Cu(II) grafting

Measurement of H(2) production from electron irradiation (10 MeV) on SBA-15 materials has shown that adsorbed water is attacked preferentially. Silanol groups are only attacked when they are in the majority with respect to adsorbed water, however they are much less efficient at producing H(2). The comparison between water content before and after electron irradiation and the corresponding H(2) production indicates that water desorption is the main route to adsorbed water loss for SBA-15 materials. On the other hand, surface silanol groups are more susceptible to attack, leading to H(2) production when SBA-15 samples have undergone extensive thermal treatment. Electron irradiation of SBA-15-Cu materials has shown that the presence of Cu(II) on the surface reduces and inhibits the production of H(2.) This inhibiting power affects adsorbed water bonded to grafted copper but not surface silanol groups.     

Search for a standard model Higgs boson in the H→ZZ→ℓ(+)ℓ(-)νν decay channel with the ATLAS detector

A search for a heavy standard model Higgs boson decaying via H→ZZ→→?(+)?(-)νν, where ?=e, μ, is presented. It is based on proton-proton collision data at √s=7 TeV, collected by the ATLAS experiment at the LHC in the first half of 2011 and corresponding to an integrated luminosity of 1.04 fb(-1). The data are compared to the expected standard model backgrounds. The data and the background expectations are found to be in agreement and upper limits are placed on the Higgs boson production cross section over the entire mass window considered; in particular, the production of a standard model Higgs boson is excluded in the region 340相似文献