Gelation in free-radical terpolymerization of poly(allyl methacrylate) crosslinked polymer nanosphere with allyl benzoate and vinyl benzoate

Microgel-like poly(allyl methacrylate) (PAMA nanosphere) was prepared by the emulsion polymerization of AMA as the reactive crosslinked polymer nanosphere with abundant pendant allyl groups. The terpolymerization of PAMA nanosphere with allyl benzoate (ABz) and vinyl benzoate (VBz) was conducted in bulk using benzoyl peroxide as initiator at 80 °C. The gelation depended on the feed ABz/VBz molar ratio since the molecular weights of resulting poly(ABz-co-VBz)s that act as the bridges increased with an increase in the mole fraction of VBz in the feed monomer. Beyond the gel point, the sol was rapidly incorporated into the gel and the increasing tendency of the gel fraction became steeper from 70 to 95 mol% of VBz as a reflection of increased chain length of bridge between PAMA nanospheres. Moreover, the swelling ratio became lower with increasing the mole percentage of VBz in the feed monomer. These results would support the preferential incorporation of PAMA nanosphere into the gel and the longer bridge can capture more nanospheres to give a much shrunken gel.     

Asymmetric skeletal rearrangement of symmetrically alpha,alpha-disubstituted alpha-amino aldehydes: a new entry to optically active alpha-hydroxy ketones

A unique asymmetric skeletal rearrangement of symmetrically alpha,alpha-disubstituted alpha-amino aldehydes has been accomplished for the first time using a chiral organoaluminum Lewis acid 1. For instance, treatment of (S)-2,2'-bis(trifluoromethanesulfonylamino)-1,1'-binaphthyl with Me3Al (1.0 equiv) in toluene at room temperature for 15 min and at 110 degrees C for an additional 15 min produced (S)-1, and a subsequent reaction with alpha -amino aldehyde 2a (R = CH2Ph) at -78 degrees C for 4 h and at -40 degrees C for 12 h resulted in the smooth rearrangement to the zwitterionic iminium intermediate A, which furnished the alpha-hydroxy ketone 3a (R = CH2Ph) in 93% isolated yield with 95% ee (S) after acidic hydrolysis. This result, together with other representative examples, clearly demonstrates the effectiveness of the present method for the hitherto difficult asymmetric synthesis of acyloins. Furthermore, we found that the treatment of the in situ generated A with DIBAH afforded the corresponding anti amino alcohol exclusively without loss of enantiomeric excess. Our approach casts light on the previously unexplored yet potential utility of alpha-amino aldehydes as synthetic building blocks and also provides a new entry to optically active alpha-hydroxy ketones and 1,2-amino alcohols.     

[2]Paracyclo[2](3,7)-p-tropoquinonophane

The title compound $\text{1}$ a novel cyclophane containing p-tropoquinone, was synthesized starting from 5-methoxytropolone and its physical properties were discussed comparing with those of 3,7-dimethyl-p-tropoquinone and p-benzoquinonophane. The reduced quinone character exhibited by $\text{1}$ was ascribed to the intramolecular CT interaction and the deformation of the quinone ring.     

Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.     

α-Carboxylation reaction of carbonyl compounds with bromomagnesium ureide-carbon dioxide adducts

Bromomagnesium ureide-carbon dioxide adducts, models of the carboxylated biotin complex, undergo caboxylation of a variety of carbonyl compounds in good yield.     

A novel measurement method of Donnan potential at an interface between a charged membrane and mixed salt solution

We developed a novel measurement method of the Donnan potential difference at a charged membrane/salt solution interface. The method can measure the potential under the condition that the membrane charge density is much lower than the KCl concentration of the salt bridge. This method is very useful for obtaining the effective charge density of each layer of a bipolar membrane. The present experiments in a system of a negatively charged poly(vinyl alcohol) membrane and a single salt solution of KCl, NaCl, LiCl, CaCl₂ and LaC₃ revealed that the membrane effective charged density has the same value for all the ions. The experiments in mixed KCl and CaCl₂ solution revealed that the potential in the system is governed mainly by the concentration of the counterion having the highest valence in the system.     

Sulfur nitride in organic chemistry. 9. The reaction of tetrasulfur tetranitride with benzyl ketones. Preparation of 3,4-disubstituted-1,2,5-thiadiazoles

The reaction of tetrasulfur tetranitride ( 1 ) with various aryl and alkyl benzyl ketones ( 2a-o ), oxindole ( 11 ), benzyl α-pyridyl ketone ( 12 ) and α-phenacylpyridine ( 13 ) afforded the corresponding 1,2,5-thiadiazoles ( 3a-n, 11 and 14 ). The scope and limitations of the above reaction were investigated and the evidences suggesting the radical anion mechanism are presented.     

Comments on the primary and scatter dose-spread kernels used for convolution methods

The basic primary and scatter dose-spread kernels used for convolution methods are usually produced by Monte Carlo simulations with the interaction point forced to the center of a large water phantom. However, it is still not clear whether such Monte Carlo based kernels allow accurate dose calculations with a wide range of field sizes and depths, especially in thorax phantoms. Using the differential primary and scatter concept, this paper proposes another type of basic kernel, with which perfectly accurate primary and scatter absorbed dose calculations can be performed under conditions that the beam is parallel, the incident beam intensity is uniform within and zero outside the field, and the primary beam attenuation coefficient along raylines is not a function of depth and off-axis distance.     

Synthesis, structure, and physical properties of 1,11-o-benzeno[2]orthocyclo[2](1,2)tropyliophane

The title compound (2) has been synthesized, the structure and the physical properties of which are investigated by X-ray, spectroscopic analyses, and MO calculations. There exists charge transfer (CT) interaction between the tropylium ion and the facing phenyl ring. From the pK_R⁺ value of 2, it can be clear that the cation 2 is stabilized by the CT interaction. In spite of the presence of bond weakening σ-π orbital mixing, the cation 2 withstands retro[4+4]type bond cleavage, which is quite interesting when compared to a facile cleavage for the congener with anthracene photodimer type structure.     

Polymerization of tetraallyl ammonium chloride

The radical polymerization of tetraallyl ammonium chloride (TAAC) was carried out in water using azo-initiator as compared to that of diallyl dimethyl ammonium chloride (DADMAC); the rate of polymerization was quite low for TAAC, around one-third of DADMAC. Kinetic discussion revealed the importance of degradative chain transfer in the polymerization of TAAC. The cyclopolymerizability of TAAC was estimated kinetically as the ability of 5-membered monocyclic radical to form a bicyclic ring, giving the cyclization constant of 21 mol/L at [M] = 2 mol/L. Gelation occurred at around 20% conversion.