Oxytelluration of olefins to (β-alkoxy- and β-hydroxy-alkyl)aryltellurium dihalides and their reactions with reducing agents and aqueous NaOH

Treatment of olefinic hydrocarbons with phenyltellurium tribromide or a mixture of diphenylditelluride and bromine in alcohol affords (β-alkoxyalkyl)phenyltellurium dibromides in fair to good yield (alkoxytelluration of olefins). Various aryltellurium trichlorides, diphenylditelluride/CuCl₂, and phenyltellurocyanate/CuCl₂ can be used for the preparation of (β-alkoxyalkyl)aryltellurium dichlorides. Similar reactions in aqueous tetrahydrofuran or aqueous t-butyl alcohol result in the formation of the corresponding β-hydroxy compound (hydroxytelluration of olefins). The reaction is trans stereospecific in the cases of cis-2-butene and cis- and trans-4-octenes and regiospecific in the cases of all terminal olefins examined (1-hexene, 1-octene, 1-decene, styrene, α-methylstyrene, 2-methyl-1-pentene, and isobutylene), tellurium species attacking the terminal carbon solely. The diorganyltellurium dihalide produced is reduced to the corresponding diorganyltelluride by reducing agents such as N₂H₄, Na₂S, Na₂S₂O₃, and NaHSO₄ in aqueous solution. Treatment of the diorganyltellurium dibromide with aqueous NaOH affords either an allylic ether (by telluroxide elimination) or a telluroxide depending on the structure of the telluroxide.     

Small-angle x-ray scattering from solution of rodlike particles with length distribution

The scattering function of rods with a constant radius, 8 Å, and a length distribution of the Schulz–Zimm type was calculated on a computer as a model of helical synthetic polypeptide. The influence of length and length distribution on the scattered intensity of small-angle x-ray scattering was clarified. As length grows and length distribution broadens it is difficult to obtain reliable values of molecular weight and radius of gyration from a Zimm plot. The influence of length distribution on the mass per unit length, M_q, and the radius of gyration of the cross section, 〈S〉^1/2, from the Guinier plot of the cross-sectional factor decreases as the length increases, and reliable values of M_q and 〈S〉^1/2 can be obtained even for rods with wide distribution for rods more than 600 Å long. In particular, it is pointed out that the value of 〈S〉^1/2 is little influenced by length and length distribution.     

Cationic polymerization of p-methylstyrene initiated by acetyl perchlorate: An approach to living polymerization

The cationic polymerization of p-methylstyrene initiated by acetyl perchlorate at ?78°C led to long-lived (living-like) polymers with a narrow molecular weight distribution (M?_w/M?_n = 1.1–1.4) in methylene chloride containing a common ion salt (n-Bu₄NClO₄) or in a less polar solvent (CH₂Cl₂/toluene, 1/4v/v). Under these conditions, the number-average molecular weight (M?_n) of the polymers increased in proportion to monomer conversion and was regulated by the monomer-to-initiator ratio. When fresh feeds of the monomer were repeatedly added to a completely polymerized solution, the polymerization ensued at the same rate as before and the linear increase in M?_n with monomer conversion continued. The effects of solvent polarity and the common ion salt on the polymerization showed the suppression of the ionic dissociation of the propagating species, resulting in a “nondissociated species,” to be the key factor for the formation of the long-lived polymers.     

A convenient stereoselective synthesis of β-lactams from β-hydroxy-α-thioalkylesters prepared from Michael/aldol tandem reaction or stereoselective addition of thiols to the Baylis-Hillman adducts

A convenient stereoselective synthesis of β-lactams from thio-Michael/aldol tandem adduct is described. syn-Selective tandem reaction followed by amidation and intramolecular S_N2 reaction provided β-lactams in diastereomerically pure form. The tandem reaction with aliphatic aldehydes, on the other hand, afforded a mixture of diastereomers of corresponding tandem adducts in about 3:1 ratio so that the conversion to β-lactams afforded a diastereomeric mixture. As an alternative approach to prepare the tandem adducts, the stereoselective Michael addition of aliphatic thiols to Baylis-Hillman adduct was developed. The stereoselectivity was sensitive to the protective group at the hydroxyl group and TBS protection brought the most successful syn-selective formation of the tandem adducts. The procedure could be applied to the ketone derivatives of the Baylis-Hillman adduct but no selectivity was observed for the nitrile-Baylis-Hillman adducts. A similar conversion of the adduct provided desired β-lactams stereoselectively.     

Synthesis of the common left-half part of pectenotoxins

The common left-half [C31-C33(OC1-C7)-C40] part of pectenotoxins has been synthesized convergently from the C31-C35, C36-C40, and C1-C7 parts. The C31-C35 part, prepared via a new route shorter than our previous route, was coupled with the C36-C40 part through reductive lithiation and addition reactions to give an adduct stereoselectively, which was converted to a cyclic acetal corresponding to the C31-C40 part. The left-half was synthesized by a three-step process including esterification of the C31-C40 part with the C1-C7 part.     

Appearance of pure fluorocarbon micelles surveyed by fluorescence quenching of amphiphilic quinoline derivatives in fluorocarbon and hydrocarbon surfactant mixtures

A halide-sensitive fluorescence probe was utilized to evaluate the miscibility of fluorocarbon and hydrocarbon surfactants in aqueous micellar systems. The fluorescence of 6-methoxy-N-1,1,2,2-tetrahydroheptadecafluorodecylquinolinium chloride, FC10MQ, was quenched by halide ions dissociated from the surfactant. The fluorescence in micellar solutions showed an initially rapid decay. This suggests that halide ions effectively quench FC10MQ fluorescence at the micellar surface. The subsequent slow decay corresponds to the quenching of FC10MQ fluorescence in the aqueous bulk phase by the free counterions. The Stern-Volmer plots for fluorescence quenching gave a distinct break at the critical micelle concentration of the cationic surfactants. The abrupt increase in fluorescence quenching is attributed to the solubilization of the probe in the micelles. The fluorescence quenching behavior provides direct information about the immiscibility of fluorocarbon and hydrocarbon species in micelles, and the results indicate that almost pure fluorocarbon micelles appear in surfactants mixtures.     

Chemical synthesis of the 5-́half molecule of E.coli tRNA2GLY

A tritriacontanucleotide which has the sequence of the 5$\text{-}\text{?}$half molecule of E.coli glycine tRNA₂, was synthesized by the phosphotriester method involving p-anisidate protection for the 3$\text{-}\text{?}$phosphate ends. Di- and trinucleotide units were prepared from 5$\text{-}\text{?}$dimethoxytrityl-2$\text{-}\text{?}$O-tetrahydrofuranyl-3?-O-(o-chlorophenyl)phosphoryl derivatives of uridine, N-benzoylcytidine, N-benzolyadenosine and N-iso-butyrylguanosine by condensation with 3$\text{,}\text{?}$5$\text{-}\text{?}$unprotected nucleosides followed by phosphorylation to give 3$\text{-}\text{?}$phosphodiester blocks. The 3$\text{-}\text{?}$terminal dimers and trimers were synthesized by using 3$\text{-}\text{?}$(o- chlorophenyl)phosphoro-p-anisidates instead of 3?,5?-unprotected nucleosides. The 3?-phosphodiesters of oligonucleotides with a chain length of larger than 5 were obtained by removal of the 3?-phosphoro-p-anisidate with isoamyl nitrite. The 5$\text{-}\text{?}$dimethoxytrityl group was removed by treatment with zinc bromide under anhydrous conditions. Fragments were designed to use common dimer blocks and to reduce the step for 5$\text{-}\text{?}$deblocking of larger fragments. Finally a 3$\text{-}\text{?}$phosphodiester block with a chain length of 20 was condensed with a 5$\text{-}\text{?}$OH component (tridecanucleotide). The fully protected 33 mer was deblocked and purified by chromatography. The structural integrity of the product was confirmed by mobility shift analysis and complete digestion with RNase T2.     

Preparation of dibromopyridines having -(CH2)m-SO3Na groups as monomers for new polypyridines

Dibromopyridines or dibromopyridone with -(CH₂)_m-SO₃Na group(s) has been prepared via the reactions of the corresponding dibromopyridines with -OH and -NH₂ groups with sultone. These compounds were converted into polymers with the -(CH₂)_m-SO₃H groups via organometallic polycondensation. The polymer showed proton conducting properties and high stability toward oxidation.     

Synthesis of Star-Shaped Polymers via Coordination of Bipyridyl-Terminated Polyoxyethylene with Metal Ions

Abstract

This paper describes the synthesis of various star-shaped polymers by means of complexation of bipyridyl-terminated polyoxyethylene with Ru(II) ion. Three kinds of bipyridyl-terminated polyoxyethylenes of different molecular weights were prepared from the corresponding polyoxyethylene monomethyl ethers with narrow molecular weight distributions. Bipyridyl was found to be introduced quantitatively at the end of the polymers based on the results of UV spectra. The formation of a star-shaped polymer was carried out by the reaction of RuCl₃ with three equivalents of bipyridyl-terminated polyoxyethylene. The UV spectrum of the star-shaped polymer obtained supported the formation of a typical Ru(II) tris(bipyridyl) complex. From the results of GPC, the star-shaped polymer obtained had a higher molecular weight than the pre-polymer and showed a narrow molecular weight distribution. In the case of a Ni(II) or a Co(II) complex, however, the star-shaped polymer was found to be dissociated into three linear prepolymers under the conditions of GPC measurement.