环氧丙烯酸酯的紫外光固化

制备了适于配制紫外光固化涂料的环氧丙烯酸酯，研究了反应温度、阻聚剂、催化剂等因素对环氧树脂与丙烯酸反应的影响；讨论了反应机理和动力学；并利用红外光谱观察了产物的紫外光固化行为。季铵盐能有效地催化环氧树脂和丙烯酸的反应，当其用量为０．６％～１．２％时，在９０～１１０℃反应４．５～８小时后，环氧基转化率大于９７％。由此配制的光固化涂料经紫外光辐照能快速固化。     

中国不同类型土壤中稀土元素的形态分布特征

采用中子活化分析地中国不同地带土壤中的稀土元素含量分布模型及其赋存形态进行了系统的研究。结果表明，黄棕壤，褐土，淋溶黑钙土及白浆土中稀土元素的分布均为轻稀土富集，Ｅｕ亏损型，砖红壤，红壤为轻稀土富集，Ｃｅ亏损型。     

STUDY ON THE SYNTHESIS OF POLYPERFLUOROTRIAZINE——The Synthesis and Polymerization of a Novel α,ω-Diiodoperfluorooxaalkyl s-Triazine Monomer*

In order to investigate synthetic route of polyperfluorotriazine elastomer, 2-trifluoromethyl4,6-bis(4′-iodo-2′-oxahexafluorobutyl)-1,3,5-triazine (1), a novel triazine monomer, was synthesized from 5-iodo-3-oxa-octafluoropentanesulfonyl fluoride (2) in eight-steps. 2 was reduced by potassium sulfite to the sulfinate (3), which was treated with hydriodic acid to yield 5-iodo-3oxa-hexafluoropentanoic acid (4). Compound 4 was transformed to 5-iodo-3-oxa-hexafluoropentanenitrile (7) through the corresponding ester 5 and amide 6. The desired product 1 was prepared by acylation-cyclodehydration of the imidoylamidine 9, obtained by condensation of the nitrile 7 with the amidine 8.The various methods for the esterification of perfluorocarboxylic acid were studied and a possible mechanism for the transformation of perfluorosulfinate to the corresponding perfluorocarboxylic acid by hydriodic acid was proposed.Crude 1 contained compounds 6, 11, 13, as impurities which were removed by low temperature crystallization followed by filtration through a short alumina column. The monomer 1 was polymerized by UV-irradiation in the presence of Hg with or without solvent. Polyperfluorooxaalkyl triazine 17 thus obtained showed good thermal stability. In the main chain of the polymer there was no weak unit of the uncyclized ring. Polymer 17 had an average molecular weight of ca. 1.33—2.0×10~4 (D. P.=27—42) and the temperature of 10% weight loss in nitrogen was 340℃.     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.     

12种道地中药中无机元素的含量测定

报道了用Ｘ射线荧光分析法测定的１２种道地中药，９８个不同产地样品中的Ｆｅ、Ｃｕ、Ｚｎ、Ｍｎ、Ｓｒ、Ｃａ、Ｋ含量。结果表明，不同种属，不同产地，不同品种中药元素量存在差异，不同加工方法影响中药中元素含量，同种中药中元素分布模式也不同。     

双头基两亲分子研究进展

本文介绍了双头基两亲分子的结构特征与性质, 概述了由双头基两亲分子在气液界面形成的单分子膜以及在体相中形成的囊泡的特征, 并介绍了这类两亲分子在催化、生物矿化、药物缓释、膜破解以及纳米材料等方面的应用研究。对其研究前景进行了展望。     

Synthesis and Crystal Structure of [{Cd(hmbdc)(H_2O)_3}·2H_2O]_n

A novel coordination polymer [{Cd(hmbdc)(H2O)3}·2H2O]n (hmbdc = 5-hydroxy- isophthalic acid) has been synthesized and characterized by elemental analysis, IR spectra and single-crystal X-ray diffraction. The crystal belongs to monoclinic, space group P21/c, with a = 9.599(3), b = 18.699(5), c = 7.557(2) , β = 108.198(4)°, V = 1288.6(6) 3, Z = 4, Mr = 382.60, Dc = 1.972 g/cm3, F(000) = 760, μ = 1.740, the final R = 0.0555 and wR = 0.0995 for 1732 observed reflections with I > 2σ(I). The structural analysis shows that the intermolecular hydrogen bonds and π-π interactions result in a three-dimensional supramolecular framework.     

一种新型碳电极材料的制备及其电化学性质研究

进入21世纪，汽车也成为了主要的交通工具，随着带来的问题是废旧轮胎的增加，然而到目前为止还没有一种有效的方法回收利用这些废旧轮胎，目前的主要处理方法是将轮胎以垃圾形式进行填埋，然而轮胎是很难分解的，因此带来了严重的环境污染问题。目前我国在废旧轮胎回收上还存在技术比较落后，再生产品单一，同时每年全国仍有大量的废旧轮胎不能得以及时回收处理。到目前为止，还没有关于以轮胎粉制作电极材料的报导。合理利用废旧轮胎制备电极材料，既能有效解决黑色污染，又能制备出价值更大的电极材料，带来良好的经济效益。     

碱性体系在线氢化物发生—原子荧光光谱法测定痕量铋

提出了一种碱性体系在线氢化物发生－原子荧光光谱法测定痕量铋的分析方法。设计了在线氢化物发生系统流路及操作程序，研究了碱性体系氢化物发生的各项最佳条件。方法操作简便快速，能有效地消除过渡元素的严重化学干扰。应用于黄铜标样中痕量铋的直接测定，获得满意结果。     

电化学氟化的新进展

电化学氟化是利用电极反应将氟直接引入有机或无机物的一种重要方法。有机物的电化学氟化方法有两种: 一是Simons于1941年发明的, 用镍作阳极, 在无水氟化氢溶液中, 电解制备全氟化合物的方法。此方法在近年来有不少改进。另一是1970年Rozhkov提出的, 以有机溶剂(如含Et3N.3HF的MeCN)为介质, 在铂阳极上,氧化得到单氟化产物的方法。本文全面地综述了这两种方法, 并着重于最新民发展。