Au5Si2/Si Heterojunction Nanowires Formed by Combining SiO Evaporation with Vapour--Liquid--Solid Mechanism

Crystalline AusSi2/Si heterojunetion nanowires （AusSi2/SiNWs） are obtained by thermal evaporating SiO pow- ders on thick gold-coated silicon substrates in a low vacuum system. Structure analysis of the produced AusSh/Si heterojunetions is performed by employing a transmission electron microscope （TEM） and a selected area electric diffraetometer. The chemical compositions axe studied by a energy-dispersive x-ray spectroscope attached to the TEM. A two-step growth model is proposed to describe the formation of the AusSi2/SiNWs. During the first step, crystalline SiNWs are formed via a growth mechanism combining the oxide-assisted growth process with the vapour-liquid-solid model at relatively high temperature. In the second step, the temperature decreases and one segment of the preformed SiNWs reacts with the remnant Au to form single crystalline AusSi2 nanowires by a solid-liquid-solid process. The present work should be useful for the future synthesis and research of high-quality gold silicide nanowires and microelectronic devices based on the nanowires.     

温度弱敏感光纤高温压力传感器

针对高温压力测量需求,提出了一种温度弱敏感的光纤微机械电子(MEMS)压力传感技术.该技术采用非本征光纤法布里-珀罗干涉模型,利用MEMS压力敏感膜片对干涉光信号进行被动调制,进而实现压力信号测量.通过仿真计算热应力和材料自身热膨胀引入的温度寄生响应来分析温度信号对膜片位移的影响.在此基础上结合亚微米级白光干涉响应技术和低热应力封装工艺,研制了高温压力传感器样机.实验测试结果表明,在20—400℃范围内,可满足0—100 kPa压力测量,由温度变化引入测量误差低于4%.     

A close look at the competition of isovector and isoscalar pairing in A=18 and 20 even-even N≈Z nuclei

competition of isovector and isoscalar pairing in A=18 and 20 even-even N≈Z nuclei is analyzed in the framework of the mean-field plus the dynamic quadurpole-quadurpole, pairing and particle-hole interactions, whose Hamiltonian is diagonalized in the basis U(24) ?(U(6) ? S U(3) ? S O(3))■(U(4) ? S US(2)■ S UT(2)) in the L = 0 configuration subspace. Besides the pairing interaction, it is observed that the quadurpole-quadurpole and particlehole interactions also play a significant role in determining the relative positions of low-lying excited 0~+ and 1~+ levels and their energy gaps, which can result in the ground state first-order quantum phase transition from J = 0 to J = 1.The strengths of the isovector and isoscalar pairing interactions in these even-even nuclei are estimated with respect to the energy gap and the total contribution to the binding energy. Most importantly, it is shown that although the mechanism of the particle-hole contribution to the binding energy is different, it is indirectly related to the Wigner term in the binding energy.     

阴离子功能化大孔树脂用于二氧化硫的多位点高效捕集

提出了一种针对大孔树脂阴离子功能化的新策略并合成了一系列阴离子功能化大孔树脂[IRA-900][An],在20 ℃和101.3 kPa的吸附条件下实现了对SO₂的超高吸附容量(> 10 mmol·g^-1)。和常规唑基阴离子功能化大孔树脂相比,聚咪唑基硼酸阴离子功能化的大孔树脂[IRA-900][B(Im)₄]在低压条件下仍然展现了卓越的SO₂捕集能力。吸附实验发现,[IRA-900][B(Im)₄]在10.13 kPa和20 ℃的低压环境中能够保持10.62 mmol·g^-1的超高SO₂吸附量。通过红外谱学研究以及密度泛函理论(DFT)计算来进行吸附机理探究,发现聚唑基硼酸阴离子[B(Im)₄]具有独特的正四面体构型,从而打破了阴离子上N负位点之间的电子流动和共轭效应。在[IRA-900][B(Im)₄]捕集SO₂过程中,阴离子连续和SO₂分子发生化学相互作用时,吸附焓变无明显下降。因此,一个[B(Im)₄]阴离子能够提供四个有效的作用位点和SO₂发生化学吸附作用,从而在低压条件下,[IRA-900][B(Im)₄]仍然实现了超高的SO₂捕集能力。此外,我们对阴离子功能化大孔树脂[IRA-900][B(Im)₄]在低压条件下对SO₂吸附的循环稳定性做了探究。结果发现,在20 ℃和10.13 kPa的吸附环境中以及70 ℃的脱附条件下,[IRA-900][B(Im)₄]展现了良好的循环稳定性,具有极大的工业应用价值。最后,这种阴离子功能化的策略以及多位点捕集方法对实现烟气环境中SO₂的高效捕集开拓了新的思路。     

一种水溶性可聚合敏化剂N－甲基丙烯酰－N＇－嘧啶哌嗪敏化的丙烯酰胺光聚合

一种水溶性可聚合敏化剂Ｎ－甲基丙烯酰－Ｎ＇－嘧啶哌嗪敏化的丙烯酰胺光聚合高青雨，杨更须，张福莲，张举贤，李福绵（河南大学化学化工系开封４７５００１）（北京大学化学系北京１００８７１）关键词Ｎ－甲基丙烯酰－Ｎ＇－嘧啶哌嗪，丙烯酰胺，水溶性光敏剂，光聚合...     

中-日首次甚长基线干涉测量(VLBI)

1985年9月间,中国-日本两国在上海和鹿岛(Kashima)之间建立了VLBI干涉系统,成功地进行了首次VLBI联测。测定了两观测站之间的基线,基线长度的测量精度达到3cm,基线各分量的测定精度好于10cm,同时,在全球VLBI坐标系中以好于20cm的精度确定了上海站的位置。本文介绍了这次测量的结果,并作了讨论。     

8-丙烯酰氧喹啉及其聚合物与四溴化碳双组分体系敏化的丙烯腈光聚合

我们曾报道过8-丙烯酰氧喹啉本身在光照下可以聚合;8-丙烯酰氧喹啉(AQ)及其聚合物(PAQ)的喹啉环上的氮原子可以和双键缺电子单体如丙烯腈(AN)在紫外光下能形成激基复合物引发AN的光聚合,并且通过荧光分析证明AQ或PAQ还参与AN聚合物链中,含有氮杂环的烯类单体如N-乙烯基咔唑等不仅和缺电子化合物,和一些卤代烷如CCl_4、CBr_4等在激发下也可以形成激基复合物,进而可以引发烯类单体聚     

一种水溶性可聚合敏化剂N－甲基丙烯酰－N＇－嘧啶哌嗪敏化的丙烯酰胺光聚合

The photopolymerization of acrylamide (AAm) was studied by using N-methacrylyl-N'-pyrimidinopip (MPMP) as sensitizer under UV irradiation.The photopolymerition rate of AAm in water with MPMP as sensitizer is proportional to 0.36th power of MPMP comcentration and 0.88th power of AAm concentration. The overall activation energy for the polymerization is determined to be 5.02Kcal/mol. A super-high MW (10⁷) of PAAm are obtained. The MW is decreased with both the increasing of MPMP concentration and the raising of polymerizat-ion temperature,and inereased with the increase of AAm concentration. Fluoresce-nt analysis indicates that MPMP not only initiates the photopolymerization of vinyl monomers,but also enters into the polymer chains.     

不同功率密度1064 nm激光辐照下小鼠皮肤热损伤研究

通过实验和理论分析研究1064 nm激光不同输出功率对小鼠皮肤的热损伤规律。利用皮肤镜与光学相干断层成像(OCT)评估小鼠皮肤组织热损伤程度;参考Arrhenius热损伤方程进行理论分析,并与实验结果对比。结果显示,当激光连续辐照时间为400 ms时,激光输出功率密度小于958 W/cm²时,激光辐照处泛红;激光输出功率密度为958～1160 W/cm²时,损伤呈白色水疱状;激光输出功率密度为1160～1370 W/cm²时,损伤呈浅坑状焦黄斑,损伤斑周围伴一圈鼓起的白色皮肤水疱;激光的功率密度在1370～2190 W/cm²,损伤呈红色坑状斑,损伤斑周围伴黑黄色焦痂。     

统计方法在微量金分析中的应用

化探金样品前处理过程中消解、富集、解吸等环节控制不严格,往往会导致最后数据处理产生过高的校正系数。为了降低校正系数,用统计学的方法对实验过程进行了详细分析,确定了主要影响因素。将水浴时间延长并保温3 h以上,泡塑大小改为0.2 g,清洗时间不大于15 s,解吸到上机时间间隔小于5 h。方法改进后,检测结果校正系数有了明显改善,从改进前有40%批次的校正系数大于1.2,降到了全部小于1.2,甚至不用校正。方法改进后降低了实验过程的误差,提高了分析测试结果的稳定性。