Crystal structure of the new FeSe(1-x) superconductor

The newly discovered superconductor FeSe(1-x) (x approximately 0.08, T(c)(onset) approximately 13.5 K at ambient pressure rising to 27 K at 1.48 GPa) exhibits a structural phase transition from tetragonal to orthorhombic below 70 K at ambient pressure-the crystal structure in the superconducting state shows remarkable similarities to that of the REFeAsO(1-x)F(x) (RE = rare earth) superconductors.     

Excellent chiralselectivity in sulfur-bridged CoIIIMCoIII (M = NiII and PdII) trinuclear complexes containing 1,2-cyclohexanediamine

The reaction of [Ni(aet)2] with [CoCl2(R,R-chxn)2]+ (aet = 2-aminoethanethiolate, R,R-chxn = 1R,2R-cyclohexanediamine) in water gave a CoIIINiIICoIII trinuclear complex, DeltaRRDeltaRR-[Ni(Co(aet)(2-)(R,R-chxn))2]4+ ([1a]4+), in which two cis(S)-[Co(aet)2(R,R-chxn)]+ units are linked by a central NiII ion through sulfur bridges. The two CoIII units in [1a]4+ uniformly adopt the Delta configuration, which is induced by the chirality of the terminal R,R-chxn ligands. The central NiII ion in [1a]4+ was replaced by a PdII ion to produce an analogous CoIIIPdIICoIII trinuclear complex, DeltaRRDeltaRR-[Pd(Co(aet)2(R,R-chxn))2]4+ ([2a]4+), with retention of the Delta configuration. When racemic R,R/S,S-chxn was employed instead of R,R-chxn, not only the chirality about two CoIII centers but also the chirality about two chxn ligands was unified in the S-bridged trinuclear structure, leading to the selective formation of a pair of enantiomers, DeltaRRDeltaRR/LambdaSSLambdaSS-[M(Co(aet)2(chxn))2]4+ (M = NiII ([1b]4+) and PdII ([2b]4+)). The stereochemical and spectroscopic features of these complexes are discussed on the basis of the electronic absorption, CD, and NMR spectroscopies, along with the crystal structures of [1a]4+ and [2a]4+.     

Rapid development of hydrophilicity and protein adsorption resistance by polymer surfaces bearing phosphorylcholine and naphthalene groups

In order to provide a protein adsorption resistant surface even when the surface was in contact with a protein solution under completely dry conditions, a new phospholipid copolymer, poly (2-methacryloyloxyethyl phosphorylcholine (MPC)- co-2-vinylnaphthalene (vN)) (PMvN), was synthesized. Poly(ethylene terephthalate) (PET) could be readily coated with PMvN by a solvent evaporation method. Dynamic contact angle measurements with water revealed that the surface was wetted very rapidly and had strong hydrophilic characteristics; moreover, molecular mobility at the surface was extremely low. When the surface came in contact with a plasma protein solution containing bovine serum albumin (BSA), the amounts of the plasma protein adsorbed on the dry surface coated with PMvN and that adsorbed on a dry surface coated with poly(MPC-co-n-butyl methacrylate) (PMB) were compared. Substantially lower protein adsorption was observed with PMvN coating. This is due to the rapid hydration behavior of PMvN. We concluded that PMvN can be used as a functional coating material for medical devices without any wetting pretreatment.     

Development of Donor-π-Acceptor-Type Fluorinated Tolanes as Compact Condensed Phase Luminophores and Applications in Photoluminescent Liquid-Crystalline Molecules

Fluorinated tolanes, produced by introducing fluorine atoms into one of the aromatic rings of tolane, emitted almost no fluorescence in a solution state, but the fluorescence intensity increased dramatically in the crystalline state because of intermolecular H⋅⋅⋅F hydrogen bonds. The photoluminescent (PL) colors depend on the molecular orbitals, dipole moments, and molecular aggregated structures can be varied by controlling terminal substituents along the major molecular axis. The introduction of a long alkoxy or semifluoroalkoxy unit as a flexible chain into the terminal positions along the major molecular axis induced the formation of a liquid-crystalline (LC) phase; fluorinated tolanes act both as luminophores and as mesogens, leading to the molecular design of new photoluminescent LC molecules (PLLCs). The results also indicated that a fluorinated tolane dimer, which consists of two fluorinated tolanes linked by a flexible alkylene spacer, also becomes a novel PLLC.     

Metallosupramolecular Structures Derived from a Series of Diphosphine‐bridged Digold(I) Metalloligands with Terminal d‐Penicillamine

In this report, we describe our recent work on the development of a new family of chiral heteroleptic digold(I) metalloligands with mixed diphosphine and d ‐penicillaminate (d ‐pen), [Au₂(dppx)(d ‐pen‐S)₂]^2– (dppx = PPh₂(CH₂)_nPPh₂, n = 1–5) and their application for the construction of chiral multinuclear and metallosupramolecular structures. The reactions of the metalloligands with 3d metal ions produce a variety of chiral heterobimetallic structures retaining the digold(I) metalloligand structure, ranging from discrete trinuclear to infinite helix structures that depend on the type of dppx. In addition, monophosphine and triphosphine analogues of the metalloligands were designed, and their coordination behavior is discussed to show the essential properties and potential extensibility of this class of metalloligands.     

Microfluidic flow control on charged phospholipid polymer interface

A type of charged phospholipid polymer biointerface was constructed on a quartz microfluidic chip to control the electroosmotic flow (EOF) and to suppress non-specific protein adsorption through one-step modification. A negatively charged phospholipid copolymer containing 2-methacryloyloxyethyl phosphorylcholine (MPC), n-butyl methacrylate (BMA), potassium 3-methacryloyloxypropyl sulfonate (PMPS) and 3-methacryloxypropyl trimethoxysilane (MPTMSi) moieties (referred to as PMBSSi) was synthesized to introduce such phosphorylcholine segments as well as surface charges onto the silica-based microchannels via chemical bonding. At neutral pH, the homogenous microchannel surface modified with 0.3 wt% PMBSSi in alcoholic solution, retained a significant cathodic EOF ((1.0 +/- 0.1) x 10(-4) cm(2) V(-1) s(-1)) with approximately one-half of the EOF of the unmodified microchannel ((1.9 +/- 0.1) x 10(-4) cm(2) V(-1) s(-1)). Along with another non-charged copolymer (poly(MPC-co-MPTMSi), PMSi), the regulation of the surface charge density can be realized by adjusting the concentration of PMBSSi or PMSi initial solutions for modification. Coincidently, the zeta-potential and the EOF mobility at neutral pH showed a monotonically descending trend with the decrease in the charge densities on the surfaces. This provides a simple but feasible approach to controlling the EOF, especially with regard to satisfying the requisites of miniaturized systems for biological applications requiring neutral buffer conditions. In addition, the EOF in microchannels modified with PMBSSi and PMSi could maintain stability for a long time at neutral pH. In contrast to the EOF in the unmodified microchannel, the EOF in the modified microchannel was only slightly affected by the change in pH (from 1 to 10). Most importantly, although PMBSSi possesses negative charges, the non-specific adsorptions of both anionic and cationic proteins (considering albumin and cytochrome c, respectively, as examples) were effectively suppressed to a level of 0.15 microg cm(-2) and lesser in the case of the 0.3 wt% PMBSSi modification. Consequently, the variation in the EOF mobility resulting from the protein adsorption was also suppressed simultaneously. To facilitate easy EOF control with compatibility to biomolecules delivered in the microfluidic devices, the charged interface described could provide a promising option.     

Square-planar N2S2NiII complexes with an extended pi-conjugated system

The reaction of a mixture of 2-(1-naphthyl)benzothiazoline (HL1) and 2,6-diphenylbenzo[1,2-d:4,5-d']bisthiazoline (H3L2) with nickel(II) acetate tetrahydrate yielded three kinds of square-planar nickel(II) complexes: one nickel(II) complex with innocent ligands ([Ni(L1)2] (1c)) and two nickel(II) complexes with non-innocent ligands ([Ni(L1-L1)] (1a) and [Ni(L1-L2)] (1b)). The complex 1c has two bidentate-N,S ligands, which are formed via ring opening of HL1. On the other hand, the two complexes 1a and 1b contain a tetradentate-N2S2 ligand, which is created via ring opening of HL1 and H3L2, followed by bond formation between imino carbon atoms. Complexes 1a and 1b show very intense absorptions in the near-infrared (NIR) region, characteristic of square-planar complexes with non-innocent ligands. The third nickel(II) complex having a non-innocent tetradentate-N2S2 ligand ([Ni(L2-L2)] (2)) was prepared from H3L2 and nickel(II) acetate tetrahydrate. The electronic spectrum of 2 exhibits a very intense absorption at 981 nm (epsilon = 3.6 x 10(4) M-1 cm-1), which is significantly red-shifted compared with those of 1a (837 nm and 4.4 x 10(4) M-1 cm-1) and 1b (885 nm and 4.5 x 10(4) M-1 cm-1), indicating the presence of an extended pi delocalization. The reaction of 2,6-bis(3,5-dichlorophenyl)benzo[1,2-d:4,5-d']bisthiazoline (H3L3) with nickel(II) acetate tetrahydrate also led to the formation of a nickel(II) complex with a non-innocent ligand ([Ni(L3-L3)] (3)). While complex 3 is analogous to 2, its electrical conductivity is much higher than that of 2. The molecular structures of 1b, 1c, 2, and 3 were determined by X-ray crystallography.     

Minimization of the sum of three linear fractional functions

In this paper, we will propose an efficient and reliable heuristic algorithm for minimizing and maximizing the sum of three linear fractional functions over a polytope. These problems are typical nonconvex minimization problems of practical as well as theoretical importance. This algorithm uses a primal-dual parametric simplex algorithm to solve a subproblem in which the value of one linear function is fixed. A subdivision scheme is employed in the space of this linear function to obtain an approximate optimal solution of the original problem. It turns out that this algorithm is much more efficient and usually generates a better solution than existing algorithms. Also, we will develop a similar algorithm for minimizing the product of three linear fractional functions.     

Synthesis of hybrid resins via polysiloxane with methacryloyloxy groups

A polysiloxane derivative with methacryloyloxy groups (MPS) that was obtained from the reaction of polymeric tributylstannyl ester of silicic acid and (3‐methacryloyloxypropyl)dimethylchlorosilane was demonstrated to be a useful inorganic component for the preparation of organic–inorganic hybrid resins as nanocomposites. The copolymerizations of MPS with common monomers such as styrene, acrylonitrile, and methyl methacrylate proceeded readily at room temperature under UV irradiation to give the corresponding resins in good yields. The resins obtained from MPS and methyl methacrylate showed good transparency, hardness in a scratch test, and resistance to toluene but had poor flexibility. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1–7, 2001