Isolation,Structure Determination,and Synthesis of Allo‐RA‐V and Neo‐RA‐V,RA‐Series Bicyclic Peptides from Rubia cordifolia L.

Two bicyclic hexapeptides, allo‐RA‐V ( 4 ) and neo‐RA‐V ( 5 ), and one cyclic hexapeptide, O‐seco‐RA‐V ( 6 ), were isolated from the roots of Rubia cordifolia L. Their gross structures were elucidated on the basis of spectroscopic analysis and X‐ray crystallography of compound 5 . The absolute stereochemistry of compounds 4 and 5 were established by their total syntheses, and the absolute stereochemistry of compound 6 by chemical correlation with deoxybouvardin ( 3 ). Comparison of the 3D structures of highly active RA‐VII ( 1 ) with less‐active compounds 4 and 5 suggests that the orientation of the Tyr‐5 and/or Tyr‐6 phenyl rings plays a significant role in their biological activity. The isolation of peptides 4 – 6 , along with compound 3 , and the comparison of their structures seem to indicate that peptide 6 may be the common precursor to bicyclic peptides 3 – 5 in the plant.     

Toward Ultralow‐Bandgap Liquid Crystalline Semiconductors: Use of Triply Fused Metalloporphyrin Trimer–Pentamer as Extra‐large π‐Extended Mesogenic Motifs

In contrast with their dimeric homologue, triply fused zinc porphyrin trimer–pentamer, as extra‐large π‐extended mesogens, assemble into columnar liquid crystals (LCs) when combined with 3,4,5‐tri(dodecyloxy)phenyl side groups ( 3 P_Zn – 5 P_Zn , Figure 1 ). Their LC mesophases develop over a wide temperature range, namely, 41–280 °C (on heating) for 5 P_Zn , and all adopt an oblique columnar geometry, typically seen in columnar LC materials involving strong mesogenic interactions. These LC materials are characterized by their wide light‐absorption windows from the entire visible region up to a near infrared (NIR) region. Such ultralow‐bandgap LC materials are chemically stable and serve as hole transporters, in which 5 P_Zn gives the largest charge carrier mobility (2.4×10^?2 cm V^?1 s^?1) among the series. Despite a big dimensional difference, they coassemble without phase separation, in which the resultant LC materials display essentially no deterioration of the intrinsic conducting properties.     

Electron Transfer in Dye‐Sensitised Semiconductors Modified with Molecular Cobalt Catalysts: Photoreduction of Aqueous Protons

A visible‐light driven H₂ evolution system comprising of a Ru^II dye ( RuP ) and Co^III proton reduction catalysts ( CoP ) immobilised on TiO₂ nanoparticles and mesoporous films is presented. The heterogeneous system evolves H₂ efficiently during visible‐light irradiation in a pH‐neutral aqueous solution at 25 °C in the presence of a hole scavenger. Photodegradation of the self‐assembled system occurs at the ligand framework of CoP , which can be readily repaired by addition of fresh ligand, resulting in turnover numbers above 300 mol H₂ (mol CoP )^?1 and above 200,000 mol H₂ (mol TiO₂ nanoparticles)^?1 in water. Our studies support that a molecular Co species, rather than metallic Co or a Co‐oxide precipitate, is responsible for H₂ formation on TiO₂. Electron transfer in this system was studied by transient absorption spectroscopy and time‐correlated single photon counting techniques. Essentially quantitative electron injection takes place from RuP into TiO₂ in approximately 180 ps. Thereby, upon dye regeneration by the sacrificial electron donor, a long‐lived TiO₂ conduction band electron is formed with a half‐lifetime of approximately 0.8 s. Electron transfer from the TiO₂ conduction band to the CoP catalysts occurs quantitatively on a 10 μs timescale and is about a hundred times faster than charge‐recombination with the oxidised RuP . This study provides a benchmark for future investigations in photocatalytic fuel generation with molecular catalysts integrated in semiconductors.     

Influence of Sn on the hydration of tricalcium aluminate, Ca3Al2O6

Tricalcium aluminate (Ca₃Al₂O₆, C₃A) containing 0?C5% of Sn was synthesized by solid-state method, and the products were characterized by XRD technique. Differential thermo-analytical technique (DTA) along with X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) were applied to study the hydration behaviour of different C₃A samples with and without the presence of gypsum. Results indicate that C₃A can accommodate small amount of Sn in its structure and remaining amount forms SnO₂. Hydration studies of the synthesized C₃A shows that the additions of 0.5 and 1% Sn increase and 2% Sn decrease the reactivity of C₃A at the initial period (<3?h) of hydration. Increasing additions of Sn also increase the amounts of amorphous phases and hexagonal calcium aluminate hydrates in the cement pastes. The stabilities of these hydration products also increase with increasing content of Sn in C₃A at the experimental conditions. The presence of Sn significantly changes the hydration of C₃A and gypsum solid mixture at the initial period of hydration by enhancing the formation of more amounts of AFt and AFm phases. However, at the later stage of hydration (on or after 3?days), the hydration products in C₃A and gypsum pastes with and without the presence of Sn are almost similar.     

Synthesis, crystal structure, and structural conversion of Ni molybdate hydrate NiMoO4·nH2O

The synthesis and crystal structure of NiMoO₄·nH₂O were investigated. The hydrate crystallized in the triclinic system with space group P−1, Z=4 with unit cell parameters of a=6.7791(2) Å, b=6.8900(2) Å, c=9.2486(2) Å, α=76.681(2)°, β=83.960(2)°, γ=74.218(2)°. Its ideal chemical composition was NiMoO₄·3/4H₂O rather than NiMoO₄·1H₂O. Under hydrothermal conditions the hydrate turned directly into α-NiMoO₄ above 483 K, giving nanorods thinner than the crystallites of the mother hydrate. On the other hand, it turned into Anderson type of polyoxomolybdate via a solid-solution process in a molybdate solution at room temperature.     

Ruthenium‐Immobilized Periodic Mesoporous Organosilica: Synthesis,Characterization, and Catalytic Application for Selective Oxidation of Alkanes

Periodic mesoporous organosilica (PMO) is a unique material that has a crystal‐like wall structure with coordination sites for metal complexes. A Ru complex, [RuCl₂(CO)₃]₂, is successfully immobilized onto 2,2’‐bipyridine (BPy) units of PMO to form a single‐site catalyst, which has been confirmed by various physicochemical analyses. Using NaClO as an oxidant, the Ru‐immobilized PMO oxidizes the tertiary C?H bonds of adamantane to the corresponding alcohols at 57 times faster than the secondary C?H bonds, thereby exhibiting remarkably high regioselectivity. Moreover, the catalyst converts cis‐decalin to cis‐9‐decalol in a 63 % yield with complete retention of the substrate stereochemistry. The Ru catalyst can be separated by simple filtration and reused without loss of the original activity and selectivity for the oxidation reactions.     

High pressure vapor–liquid equilibria for carbon dioxide + tetrahydrofuran mixtures

Vapor–liquid equilibria and saturated density for carbon dioxide + tetrahydrofuran mixtures at high pressures were measured by the analytical method at the temperatures 298.15 and 313.15 K. The experimental apparatus equipped with three Anton Paar DMA 512S vibrating tube density meters was previously developed for measuring vapor–liquid–liquid equilibrium at high pressures. The equilibrium composition and saturated density of each phase were determined by gas chromatograph and vibrating tube density meters, respectively. The bubble point pressure at the temperature 313.15 K was further measured by the synthetic method. The experimental data were correlated with Soave–Redlich–Kwong (SRK) equation of state and the pseudocubic equation of state.     

A thermodynamic consistency test for the binary constant-temperature VLE data using numerically optimized binary parameters

A thermodynamic consistency (TC) test for the constant-temperature VLE data was investigated by numerically optimizing the binary parameters of the activity coefficient equations to satisfy the Gibbs–Duhem (GD) equation. It was shown that the one parameter Margules equation can best satisfy the GD equation, even if significant experimental errors are involved. A thermodynamic consistency (TC) criterion was defined using the one parameter Margules equation. The TC criterion showed that, of the 37 alkane–alkane, 18 methanol–water and 44 ethanol–water binaries, 36, 16 and 1 binaries are reliable, respectively. Simple liquid mixtures meet the TC criterion.