Traces of functions with a dominating mixed derivative in ℝ<Superscript>3</Superscript>

We investigate traces of functions, belonging to a class of functions with dominating mixed smoothness in ℝ³, with respect to planes in oblique position. In comparison with the classical theory for isotropic spaces a few new phenomenona occur. We shall present two different approaches. One is based on the use of the Fourier transform and restricted to p = 2. The other one is applicable in the general case of Besov-Lizorkin-Triebel spaces and based on atomic decompositions.     

Fractional extensions of some boundary value problems in oil strata

In the present paper, we solve three boundary value problems related to the temperature field in oil strata — the fractional extensions of the incomplete lumped formulation and lumped formulation in the linear case and the fractional generalization of the incomplete lumped formulation in the radial case. By using the Caputo differintegral operator and the Laplace transform, the solutions are obtained in integral forms where the integrand is expressed in terms of the convolution of some auxiliary functions of Wright function type. A generalization of the Laplace transform convolution theorem, known as Efros’ theorem is widely used.     

Allocation of jobs and identical resources with two pooling centers

We examine the resource allocation problem of partitioning identical servers into two parallel pooling centers, and simultaneously assigning job types to pooling centers. Each job type has a distinct Poisson arrival rate and a distinct holding cost per unit time. Each pooling center becomes a queueing system with an exponential service time distribution. The goal is to minimize the total holding cost. The problem is shown to be polynomial if a job type can be divided between the pooling centers, and NP-hard if dividing job types is not possible. When there are two servers and jobs cannot be divided, we demonstrate that the two pooling center configuration is rarely optimal. A heuristic which checks the single pooling center has an upper bound on the relative error of 4/3. The heuristic is extended for the multiple server problem, where relative error is bounded above by the number of servers.      

Impact of demand uncertainty on coordinating supply chain inventories through common replenishment epochs

Prior studies have shown that inventories in a one vendor, multi-buyer supply chain with deterministic demands can be coordinated effectively through the use of common replenishment epochs (CRE). In this paper, we study the impact of demand uncertainty on the effectiveness of coordinating such a supply chain. We develop a model to analyse the coordination mechanism using CRE in a one-vendor, multi-buyer supply chain, when the demand faced by the buyers is stochastic. Our numerical study based on the model found that coordination through CRE may not always be beneficial when the demand variance is high. We also investigate a strategy of advance order processing by the vendor to improve the effectiveness of coordination through CRE.     

‘Doing the right problem’ <Emphasis Type="Italic">versus</Emphasis> ‘doing the problem right’: problem structuring within a Land Force environment

The essential first step of any OR investigation is to ensure that the ‘right problem’ is studied. Our approach is to propose a set of six ‘rights’ or questions whereby achievement against particular aspects of a problem space is made and these provide the basis for scoping the context, understanding the system, and proposing sound options to the decision-maker. This style of problem structuring is an essential element of the Defence problem domain, and especially so for the Land Force, where there exist multiple degrees of freedom for poorly defined problems in an environment of uncertainty and ambiguity. Central to this is performing conceptual rather than analytical modelling, as perturbations then provide a basis for exploring a space, rather than solving a problem.     

A high-resolution MAS NMR study on the potential catalysts Mo/HBeta for olefin metathesis: The interaction of Mo species with HBeta zeolite

The interfacial interaction of Mo species with the HBeta zeolite was studied by multinuclear MAS NMR, XRD and N₂ adsorption. As proved by the quantitative ²⁷Al MAS NMR, this interaction is so strong as to dealuminate the framework of HBeta, and leads to a new peak appearing at −14 ppm, which indicates the formation of crystalline Al₂(MoO₄)₃. This can also be detected by XRD measurements when the Mo loading is as high as 9.0 wt.%. The corresponding quantitative ²⁹Si and ¹H MAS NMR spectra show that the amount of silanols and Brønsted acidic sites decrease obviously with increasing Mo loading. This also reveals an interaction between Mo species and HBeta support through an oxygen bridge resulting from condensation with the hydroxyls on the support. At higher Mo loadings, the interaction is so strong that it results in an extraction of aluminum from the zeolite framework, and subsequently appearance of Al₂(MoO₄)₃ and loss of Brønsted acidic sites. These can be correlated to the low catalytic activity of Mo/HBeta in metathesis of ethylene and 2-butylene to propylene.     

Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Preparation and characterization of optically active polystyrene via a chiral nitroxide‐mediated polymerization

2,2,6,6‐Tetramethyl‐4‐[d‐(+)‐10‐camphorsulfonyl]‐1‐piperidinyloxy was synthesized and used as a chiral nitroxide for the bulk polymerizations of styrene initiated with benzoyl peroxide (BPO), tetraethylthiuram disulfide (TETD), and thermal initiation. The results showed that the polymerizations proceeded in a controlled/living way; that is, the kinetics presented approximately first‐order plots, and the number‐average molecular weights of the polymers with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) increased with the monomer conversion linearly. The molecular weight distributions in the case of thermal initiation were narrower than those in the case of BPO and TETD, whereas the polymerization rate with BPO or TETD as an initiator was obviously faster than that with thermal initiation. In addition, successful chain‐extension reactions were carried out, and the structures of the obtained polymers were characterized by gel permeation chromatography and ¹H NMR. The specific rotations of the polymers were also measured by polarimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1522–1528, 2006