Correction: Direct synthesis of the organic and Ge free Al containing BOG zeolite (ITQ-47) and its application for transformation of biomass derived molecules

Aluminosilicate boggsite (Si/Al-BOG) has been hydrothermally synthesized without adding organic structure-directing agents (OSDAs) in the synthesis gel using the borosilicogermanium ITQ-47 (Si/B-ITQ-47) zeolite as seeds. The introduction of the costly and environmentally less benign phosphazene organic structure-directing agent is not required to grow the zeolite. Physicochemical characterization experiments show that Si/Al-BOG has good crystallinity, high surface area, tetrahedral Al³⁺ species, and acid sites. In order to test the catalytic performance of the zeolite, the synthesis of l,l-lactide from l-lactic acid was performed. Si/Al-BOG exhibits 88.2% conversion of l-lactic acid and 83.8% l,l-lactide selectivity, which are better than those of other zeolites studied up to now.

Aluminosilicate boggsite (Si/Al-BOG) has been hydrothermally synthesized without adding organic structure-directing agents (OSDAs) in the synthesis gel using the borosilicogermanium ITQ-47 (Si/B-ITQ-47) zeolite as seeds.     

Synthesis,crystal structure and magnetic properties of a series of polymeric lanthanoid–copper complexes [Ln2Cu3{O(CH2−CO2)2}6]·nH2O (Ln=La,Nd, n=9; Ln=Er,n=6)

The reaction of diglycolic acid, O(CH2CO2H)2, with Cu(NO3)2·2H2O and lanthanoid nitrate hydrate produces a series of novel Ln–Cu mixed metal complexes, [Ln2Cu3{O(CH2CO2)2}6]·nH2O (Ln=La, Nd, n=9; Ln=Er, n=6), which have been characterized by elemental analysis, i.r. spectroscopy, magnetic measurements and X-ray crystallography. The Ln3+ and Cu2+ ions are connected by the carboxylate groups of the ligands, resulting in the formation of a complicated network.     

Synthesis and Characterization of 1,8-bis(ferrocenylmethyl)-5,5,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane, a Macrocyclic Ligand and its Complexes

A new diferrocenyl-substituted macrocyclic ligand (H₂L) and its complexes ML(M = Cu^II, Ni^II, Zn^II, Cd^II) were prepared and characterized by IR, elemental analysis, absorption spectra and FAB mass spectra. The ferrocenyl-substituted macrocyclic ligand was characterized by single crystal X-ray diffraction analysis. The superconjugative effect of the cyclopentadienyl (CP) rings increase the activity of the hydrogen atoms in the tetra-azacyclotetradecane macrocyclic ligand. The imine nitrogen atoms lose two protons and coordinate to the metal. The electrochemical properties of these compounds are discussed.     

Two new tetranuclear complexes of the macrocyclic oxamide [MCu3] (M = Cd, Mn, macrocyclic oxamide = 1,4,8,11-tetraazacyclotradecanne-2,3-dione): syntheses, spectra and magnetic properties

Two new tetranuclear complexes of macrocyclic oxamide [Cd(CuL)₃](NO₃)₂·2.5H₂O 1, [Mn(CuL)₃(OH)₂](ClO₄)₂·Mn(H₂O)₆·4.5H₂O 2 (L = 1,4,8,11-tatraazacyclotradecanne-2,3-dione) have been synthesized, structurally characterized and preliminary investigated by magnetic studies. The structures of the title complexes consist of a tetranuclear units MCu₃ (M = Cd, Mn), the packing diagram shows two-dimensional and three-dimensional system through intermolecular weak interactions. The temperature-dependent magnetic susceptibilities of complex 2 were analyzed by an approximate treatment leading to J = −33 cm⁻¹, g_Cu = 2.10, g_Mn = 1.95 indicating antiferromagnetic exchange between Cu(II) and Mn(II) ions.     

Microchemical investigation of medicinal plants. XV

Summary A method is described for the determination of alkaloids in morning glory leaves by means of spectrophotofluorimetry. The total alkaloidal contents found in different batches of leaves ranged from 0.027 to 0.04%.

---

Zusammenfassung Ein Verfahren zur Bestimmung der Gesamtalkaloide in den Blättern vonIpomoea violacea wurde angegeben. Spektralfluoreszenzmessungen ergaben für verschiedene Chargen solcher Blätter Gehalte von 0,027 bis 0,04%.

---

---

For part XIV see Mikrochim. Acta [Wien]1976 I, 227.     

三苄基氯化锡及其衍生物的合成

三苄基氯化锡最初用格氏法制得。Keiti等曾报道由锡和苄基氯直接制备,这时溶剂对反应的影响很大:用水作溶剂时得到三苄基锡;用甲苯作溶剂时得到二苄基二氯化锡;用正丁醇作溶剂时三苄基氯化锡的产率只有61％。在反应体系中加入KI、KBr或H_3PO_4等催化剂,三苄基氯化锡的产率也只有60％。本文用DMF作溶剂,AlCl_3-I_2作催化剂,并首次在反应体系中加入镁、锌、铝和钠等使副产物氯化亚锡还原成活性很高的金属锡,后者再与等基氯反应,可使三苄基氯化锡的产率提高到91.3％。文中还报导三种尚     

Aqueous p-nitrotoluene oxidation induced with direct glow discharge plasma

A plasma induced degradation process has been studied to treat 4-nitrotoluene (4-NT) present as an aqueous pollutant. The plasma was locally generated from a glow discharge around a tip of a platinum anode in an electrolytic solution. The influence of initial pH and Fe²⁺ on the degradation was examined. Major intermediates resulting from the degradation process were identified. Amongst the aromatic intermediates, p-hydroxybenzoic acid was the predominant degradation product. The formation of oxalic acid, malic acid was also observed. The final products of degradation were NH ₄ ⁺ , NO ₃ ⁻ and CO₂. Based on the analysis of intermediates and the kinetic considerations, the degradation was shown to follow a pseudo-first order reaction hence, a possible reaction pathway was proposed.     

Preparation of a set of selectively protected disaccharides for modular synthesis of heparan sulfate fragments: toward the synthesis of several <Emphasis Type="Italic">O</Emphasis>-sulfonated [β-D-GlcUA-(1→4)-β-D-GlcNAc]OPr types

A concise method for a stereocontrolled synthesis of a set of selectively protected disaccharides is reported. Coupling of the donor 11 onto acceptors 23 and 24, promoted by trimethylsilyl triflate-N-iodosuccinimide (TMSOTf-NIS), generated the disaccharides 25 and 26. Under typical conditions, condensation of the fully protected donor 12 onto acceptors 23 and 24 produced the disaccharides 27 and 28. The building blocks 25–28 were prepared in moderate yields having exclusive β-stereoselectivity. A unique pattern of protecting groups distinguished clearly between positions to be sulfated and functional groups remaining as free hydroxyl groups. Acetyl and/or levulinoyl esters temporarily protected the positions to be sulfated, while benzyl ethers were used for permanent protection. The anomeric positions were protected as allyl ethers, whereas the 4′-positions were masked as p-methoxybenzyl (PMB) ethers. The orthogonality of the PMB and allyl groups can then be used for further elongation of the chain by recurrent deprotection and activation steps. The hydroxyl group, OH-6, of glucosamine moieties was protected as a TBDPS ether to avoid oxidation. A five-step deprotection/sulfonation sequence was applied to the disaccharide 27 to generate the corresponding sulfated [β-D-GlcUA-2-OSO₃Na-(1→4)-β-D-Glc pNAc]-(1→O-Pro) 34.     

Optimization of the design and operation of FAIMS analyzers

Field asymmetric waveform ion mobility spectrometry (FAIMS) holds significant promise for post-ionization separations in conjunction with mass-spectrometric analyses. However, a limited understanding of fundamentals of FAIMS analyzers has made their design and operation largely an empirical exercise. Recently, we developed an a priori simulation of FAIMS that accounts for both ion diffusion (including anisotropic components) and Coulomb repulsion, and validated it by extensive comparisons with FAIMS/MS data. Here it is corroborated further by FAIMS-only measurements, and applied to explore how key instrumental parameters (analytical gap width and length, waveform frequency and profile, the identity and flow speed of buffer gas) affect FAIMS response. We find that the trade-off between resolution and sensitivity can be managed by varying gap width, RF frequency, and (in certain cases) buffer gas, with equivalent outcome. In particular, the resolving power can be approximately doubled compared to "typical" conditions. Throughput may be increased by either accelerating the gas flow (preferable) or shortening the device, but below certain minimum residence times performance deteriorates. Bisinusoidal and clipped-sinusoidal waveforms have comparable merit, but switching to rectangular waveforms would improve resolution and/or sensitivity. For any waveform profile, the ratio of two between voltages in high and low portions of the cycle produces the best performance.     

Characterization and electrochemical investigation of boron-doped mesocarbon microbead anode materials for lithium ion batteries

The structure and anodic performance of boron-doped and undoped mesocarbon microbeads (MCMBs) have been comparatively studied and the results obtained by XPS, XRD, SEM, Raman spectroscopy and electrochemical measurements are discussed. It is found that boron doping introduces a depressed d ₀₀₂ spacing and the larger amount of "unorganized carbon", which induces vacancy formation in the graphite planes and leads to a quite different morphology from that of the undoped material. Electrochemical charge/discharge cycle tests indicated that after boron doping the lithium intercalation was carried through at a somewhat higher potential, being attended by greater irreversible capacity loss. Electronic Publication