Zn(Oxin)2·2H2O纳米晶的固相化学反应合成及表征

随着纳米微粒研究的深入,对纳米超细微粒提出了不同的物理、化学特性需求,制备高纯、超细、均匀的纳米微粒,发展新型的纳米材料,就显得非常重要,而解决问题的关键在于研究、发展新的合成技术.通常,纳米微粒制备的要求是:表面洁净;粒子形状及粒径、粒度分布可控,防止粒子团聚;易于收集;有较好的稳定性;产率高.     

On-line Separation and Detection of Peptides by Capillary Electrophoresis / Electrospray FT-ICR-MS

Recently, capillary electrophoresis/electrospray ionization mass spectrometry (CE/ESI- MS) has been rapidly developed as a powerful analytical tool for charged species ranged from small molecules such as carboxylic acids1, phenolic compounds2, metal species3, tetramines4, herbicides5, drugs and drug metabolites6 to peptides and proteins7, 8. The ESI mode has proven to be sensitive, versatile and relatively easy to use in combination with CE. CE confers rapid analysis and efficient separ…     

The solid state reactions of o-aminobenzoic acid with Zn(Ⅱ), Cu(Ⅱ), Ni(Ⅱ), Mn(Ⅱ) acetate hydrate at room temperature

The solid-solid state reactions of o-aminobenzoic acid with Zn(OAc)2.2H2O, Cu(OAc)2 .H2O, Ni(OAc)2.4H2O and Mn(OAc)2.4H2O result in the formation of corresponding complexes M(OAB)2 (M = Zn(Ⅱ), Cu(Ⅱ), Ni(Ⅱ), Mn(IⅡ)). XRD, IR and elemental analysis methods have been used to characterize the solid products. The activation energies of these reactions, which are calculated from the kinetic data obtained by means of the isothermal electrical conductivity measurement method, have been found to increase in the order: Cu(OAc)2.H2O(37.7 kJ.mol-1)~Mn(OAc)2.4H2O (39.7kJ.mol-1) < Zn(OAc)2.2H2O (56.3 kJ.mol-1) < Ni(OAc)2.4H2O (85.2 kJ.mol-1). The trend is related to their crystal structures.     

Physico-chemical Characterization of Mo-Hβ Zeolite Catalysts

A series of Mo-impregnated Hβ samples, with MoO3 loading in Hβ zeolite in the mass fraction range of 0. 5%-6.0%, were studied by means of XRD and IR in order to characterize their structures. Mo/Hβ sampies‘ crystallinity almost linearly decreases with increasing the amount of MoO3 loaded, The IR spectra and XRD patterns suggest that the progressive destabilization of the Hβ zeolite structure is caused by increasing Mo loading in (MoO3 Hβ zeolite). During the calcination, Al2(MoO4)3 formed from the dealumination of Hβ zeolite, causes the substantially partial breakdown of the zeolite framework when the Mo loading in MoO3 Hβ is relatively high.     

狭缝光栅自由立体显示器立体可视区域的研究

提出了反映观察区域某一点是否是合适的立体观察点立体图像质量因子的概念.根据狭缝光栅自由立体显示器的结构和工作原理并应用几何光学知识,分析得出了立体图像质量因子的计算公式,并给出了立体显示器的立体图像质量因子的计算结果.通过定义立体图像质量因子的阈值,得到狭缝光栅自由立体显示器的立体可视区域.     

Electrospun Nanofibrous Adsorption Membranes for Wastewater Treatment: Mechanical Strength Enhancement

Functional nanofibrous membranes fabricated by electrospinning technology have attracted much attention in the removal of heavy metal ions from contaminated wastewater. The high specific surface area, high porosity and ease of functionality create an enhanced throughput and high adsorption capacity of the nanofibrous membrane. However, the relatively poor mechanical properties of the membrane with a non-woven nanofibrous structure are one of the major concerns, which can limit the applications in wastewater treatment. Different strategies and methodologies were explored to address the problems and were reviewed in this work, highlighting the possibilities of overcoming the poor mechanical properties of the nanofibrous membrane and to ensure the recyclability and reusability of the membrane during the adsorption process.     

中空石墨碳材料作为电催化剂载体在直接乙醇燃料电池中的应用

以间苯二酚、苯酚与甲醛为前体,合成了一种中空石墨碳材料(hollow graphitic carbon,HGC).透射电镜(TEM)、N2吸附-脱附和Raman光谱测试结果表明,所制备的HGC为中孔结构,平均孔径为36nm.与商品Vulcan XC-72R相比,HGC中孔结构丰富,石墨化程度高.分别以HGC和XC-72R为载体制备了总金属载量为45%的PtSn/C电催化剂,X射线衍射和TEM结果表明这两个样品的平均粒径和晶格常数相近.单池性能测试表明,以45%PtSn/HGC为阳极催化剂的直接乙醇燃料电池的最大功率密度达到了62mW/cm2,与PtSn/XC-72R的54mW/cm2相比提高了近15%.     

大功率固态调制器的仿真研究

 设计了大功率固态调制器的新型固态脉冲开关模块。通过分析电力电子仿真软件Saber中绝缘栅双极晶体管(IGBT)物理模型的概念和等效电路,结合实验数据建立了IXDH20N120型IGBT的模型,研究了Saber环境下,不同参数条件和拓扑结构对调制器电路输出特性的影响。仿真结果表明：动态均压网络在有效地保护开关的同时,可以减少IGBT的开关损耗;电路中器件离散性与系统分布参数会造成调制器输出波形质量下降,效率降低。并对调制器在负载打火情况下,因严重不均流而损坏器件故障的机理作了分析,实验证明仿真结果和分析与实际相符。     

低浓度部分水解聚丙烯酰胺/柠檬酸铝交联体系剪切稳定性研究

采用粘度法、核孔膜过滤和动态光散射(DLS)法,研究了高分子量低浓度的部分水解聚丙烯酰胺(HPAM)与柠檬酸铝(AlCit)反应所形成的交联体系的剪切稳定性和HPAM剪切降解后与AlCit反应所形成的体系的封堵性能及降解机理.研究结果表明,低浓度的HPAM与AlCit反应所形成的交联聚合物体系随剪切速率增加,其对1.2μm的核孔膜的封堵能力降低.HPAM稀溶液剪切降解后再与AlCit反应,低剪切速率对其封堵性能影响较小,而高剪切速率会使得其封堵性能大大降低.HPAM/AlCit交联体系和HPAM剪切降解后形成的交联体系的封堵性能下降的原因是HPAM/AlCit交联体系中交联聚合物线团(LPC)尺寸和HPAM中高分子线团的尺寸变小.     

紫外光谱估测贵州天麻中的天麻素

采用高效液相色谱法和紫外光谱法测定名贵中药材贵州天麻样品中天麻素的含量,选择在最大吸收波长223nm处,分析天麻素含量与紫外光谱的吸光度数值之间的相关性.采用先聚类后回归的分析法进一步估测天麻中天麻素的含量.结果表明:在223nm处,天麻素含量与紫外光谱的吸光度数值呈显著相关,其相关系数均达到0.98以上.对回归模型进行检验,预测值与实测值吻合.这表明紫外光谱法可为系统评价贵州天麻等级提供理论依据和相关技术手段.