A comparison of T2*-weighted magnitude and phase imaging for measuring the arterial input function in the rat aorta following intravenous injection of gadolinium contrast agent

The arterial input function (AIF) is important for quantitative MR imaging perfusion experiments employing Gd contrast agents. This study compared the accuracy of T(2)*-weighted magnitude and phase imaging for noninvasive measurement of the AIF in the rat aorta. Twenty-eight in vivo experiments were performed involving simultaneous arterial blood sampling and MR imaging following Gd injection. In vitro experiments were also performed to confirm the in vivo results. At 1.89 T and TE=3 ms, the relationship between changes in 1/T(2)* in blood (estimated from MR signal magnitude) and Gd concentration ([Gd]) was measured to be approximately 19 s(-1) mM(-1), while that between phase and [Gd] was approximately 0.19 rad mM(-1). Both of these values are consistent with previously published results. The in vivo phase data had approximately half as much scatter with respect to [Gd] than the in vivo magnitude data (r(2)=.34 vs. r(2)=.17, respectively). This is likely due to the fact that the estimated change in 1/T(2)* is more sensitive than the phase to a variety of factors such as partial volume effects and T(1) weighting. Therefore, this study indicates that phase imaging may be a preferred method for measuring the AIF in the rat aorta compared to T(2)*-weighted magnitude imaging.     

An artificial siderophore for the detection of iron(III)

An artificial siderophore in the form of a squaraine dye (1) has been synthesized. The bidentate ligand chelates to Fe(III) between the deprotonated hydroxyl group on the ortho position of the ring adjacent to the carbonyl group of the cyclobutadiene ring. The optical response is due to a subtle geometry change of 1 on chelation to Fe(III). This artificial siderophore forms a 2 ratio 1 ligand ratio metal complex, as indicated by a sigmoidal isotherm (K(a)= 10(7) M(-1)). The optical response on the addition of Fe(III) is observed at low concentrations in comparison to other metal salts. The X-ray crystal structure and calculated structures of dye (1) are also included, and will be discussed.     

Radiation-driven hydrodynamics of high- hohlraums on the national ignition facility

The first hohlraum experiments on the National Ignition Facility (NIF) using the initial four laser beams tested radiation temperature limits imposed by plasma filling. For a variety of hohlraum sizes and pulse lengths, the measured x-ray flux shows signatures of filling that coincide with hard x-ray emission from plasma streaming out of the hohlraum. These observations agree with hydrodynamic simulations and with an analytical model that includes hydrodynamic and coronal radiative losses. The modeling predicts radiation temperature limits with full NIF (1.8 MJ), greater, and of longer duration than required for ignition hohlraums.     

Wavepacket propagation using time-sliced semiclassical initial value methods

A new semiclassical initial value representation (SC-IVR) propagator and a SC-IVR propagator originally introduced by Kay [J. Chem. Phys. 100, 4432 (1994)], are investigated for use in the split-operator method for solving the time-dependent Schrodinger equation. It is shown that the SC-IVR propagators can be derived from a procedure involving modified Filinov filtering of the Van Vleck expression for the semiclassical propagator. The two SC-IVR propagators have been selected for investigation because they avoid the need to perform a coherent state basis set expansion that is necessary in other time-slicing propagation schemes. An efficient scheme for solving the propagators is introduced and can be considered to be a semiclassical form of the effective propagators of Makri [Chem. Phys. Lett. 159, 489 (1989)]. Results from applications to a one-dimensional, two-dimensional, and three-dimensional Hamiltonian for a double-well potential are presented.     

Dynamic surface tension measurements with submillisecond resolution using a capillary-jet instability technique

An oscillating capillary jet method is implemented to measure surface tension of aqueous nonionic surfactant solutions as a function of surface age from the jet orifice. The experimental technique captures the evolution of jet swells and necks continuously along the jet propagation axis and is used in conjunction with an existing linear, axisymmetric, constant-property model to determine surface tension of liquids. The method is first validated using deionized water and isopropyl alcohol (constant surface tension test fluids) and a procedure is described to identify the optimum wavelength from the breakup point, which produces the smallest error in surface tension measurements. Dynamic surface tension data of concentrated aqueous Tergitol NP-8 surfactant solutions is then presented. The measurements are performed over a spatial length of approximately 1.5 wavelengths, a span corresponding to 0.6-4.2 ms time window from the jet orifice. Submillisecond surface age measurements are made possible by decreasing the jet diameter. Increased surfactant concentrations make the liquid jet more stable and allow measurements at higher surface ages. The correlation of Hua and Rosen fits well the dynamic surface tension data, which includes submillisecond surface ages. Finally, the time required for surface tension to reach equilibrium levels is estimated using a simple adsorption kinetics theory of surfactant molecules on the liquid/air interface.     

NMR spectra of 1,3,5-triazines with fluorinated substituents

The NMR spectra of a series of 1,3,5-triazines (1) in which one or more of the substituent groups are fluorinated are described, and the results are discussed in terms of bonding and geometry of the molecules. Remote effects of unsymmetrical substitution are observed in the fluorine-19 and carbon-13 spectra, in some molecules indicating restricted rotation about the bond joining an amino group to a ring carbon.     

Metal-directed self-assembly of bimetallic dithiocarbamate transition metal cryptands and their binding capabilities

A novel family of redox-active dinuclear transition metal based cryptands self-assembled from dithiocarbamate ligands has been synthesised; depending upon the nature of the spacer groups these new cryptand systems have been shown to electrochemically recognise the binding of cations or anions.