N-labelling studies of the reaction of 2,6-di-t-butyl-4-methyl-4-nitrocyclohexa-2,5-dienone with nitrogen dioxide; A revised mechanism

Reaction of the ¹⁵N-4-nitrodienone (1) with excess nitrogen dioxide in benzene for 16 h gives the 4,5,6-trinitro ketone (2), labelled (¹⁵NO₂) at C6 but not at C4, and recovered 4-nitrodienone (1) in which extensive loss of ¹⁵NO₂ has occurred. The mechanistic implications of these and related results are discussed.     

Inclusive ϕ production inK − p interactions at 110 GeV/c and search for structure in φ π−

Results on inclusive ? production inK ^? p interactions at 110 GeV/c are presented. The production cross section is found to be larger than in πp andpp interactions at similar energies, suggesting OZI allowed \(s\bar s\) fusion to be the dominant mechanism in ? production. Thex distributions of ? and \(\bar K^{*0} \) are found to be similar to each other over the entirex range suggesting an overall strangeness suppression factor of 0.20±0.04 in the sea to be the dominant source of the difference in the cross section for ? and \(\bar K^{*0} \) . There is no evidence of a narrowφπ ^? state around 2.1 GeV/c² as suggested byK ⁺ experiments, but there is some excess of events in the region 1.94?1.98 GeV/c² consistent with theF-meson mass as observed ine ⁺ e ^? experiments.     

A sensitive solid-phase fluoroimmunoassay for detection of opiates in urine

An automated flow fluorometer designed for kinetic binding analysis was adapted to develop a solid-phase competitive fluoroimmunoassay for urinalysis of opiates. The solid phase consisted of polymer beads coated with commercial monoclonal antibodies (MAbs) raised against morphine. Fluorescein-conjugated morphine (FL-MOR) was used as the fluorescein-labeled hapten. The dissociation equilibrium constant (K _D ) for the binding of FL-MOR to the anti-MOR MAb was 0.23 nM. The binding of FL-MOR to the anti-MOR MAb reached steady state within minutes and was displaced effectively by morphine and other opiates. Morphine-3-glucuronide (M3G), the major urinary metabolite of heroin and morphine, competed effectively with FL-MOR in a concentration-dependent manner for binding to the antimorphine MAb and was therefore used to construct the calibration curve. The sensitivity of the assay was 0.2 ng/mL for M3G. The assay was effective at concentrations of M3G from 0.2 to 50 ng/mL, with an IC₅₀ of 2 ng/mL. Other opiates and heroin metabolites that showed >50% crossreactivity when present at 1 μg/mL included codeine, morphine-6-glucuronide, and oxycodone. Methadone showed very low crossreactivity (<5%), which is a benefit for testing in patients being treated for opiate addictions. The high sensitivity of the assay and the relatively high cutoff value for positive opiate tests allows very small sample volumes (e.g., in saliva or sweat) to be analyzed. A double-blind comparison using 205 clinical urine samples showed good agreement between this single-step competitive assay and a commercially performed enzyme multiplied immunoassay technique for the detection of opiates and benzoylecgonine (a metabolite of cocaine).     

The [2 + 4] Diels-Alder cycloadditon product of a probable dialuminene,Ar'AlAlAr' (Ar' = C(6)H(3)- 2,6-dipp(2); dipp = C(6)H(3)-2,6-Pr(i)(2)), with toluene

Reduction of Ar'AlI2 (Ar' = Ar'= C6H3-2,6-Dipp2; Dipp = C6H3-2,6-Pri2) with KC8 in diethyl ether most probably affords the first "dialuminene", Ar'AlAlAr'; it was characterized by its reaction with toluene which yielded a [2 + 4] cycloaddition product incorporating the Ar'AlAlAr' unit.     

P and H NMR studies of the transesterification polymerization of polyphosphonate oligomers

Polymeric phosphonate esters are an interesting class of organophosphorus polymers because both the polymer backbone and phosphorus substituents can be modified. These polymers have been prepared by ring-opening polymerizations of cyclic phosphites, stoichiometric polycondensations of dimethyl phosphonate with diols in conjunction with diazomethane treatment and by transesterification of polyphosphonate oligomers. Our initial attempts to prepare high molecular weight polymeric phosphonate esters by the transesterification methods were unsuccessful. Results indicate that the reactions of dimethyl phosphonate with diols to form polyphosphonate oligomers with only methyl phosphonate end groups are plagued by a serious side reaction that forms phosphonic acid end groups. These end groups do not participate in the transesterification reaction and limit the molecular weights of the polymers that can be obtained. The phosphonic acid end groups can be converted into reactive methyl phosphonate end groups by treatment with diazomethane, however diazomethane is explosive and the polymerization is slow. An alternative route for the production of high molecular weight polymers is the transesterification of the 1,12-bis(methyl phosphonato)dodecane, formed by the reaction of excess dimethyl phosphonate and 1,12-dodecanediol, with a Na₂CO₃ promoter. This allows polymers with molecular weights of up to 4.5×10⁴ to be prepared, and no phosphonic acid end groups are observed in these polymers. Thermal analyses of the poly(1,12-dodecamethylene phosphonate) have shown that this polymer has reasonable thermal stability (onset of thermal decomposition at 273 °C). This polymer also undergoes a cold crystallization process at 15 °C similar to that which has been observed in some polyesters, polyamides and elastomers.     

DEMONSTRATION THAT PHOSPHORESCENT 6-BROMO-2-NAPHTHYL SULFATE CAN BE USED TO PROBE HEME ACCESSIBILITY IN HEME PROTEINS

The phosphorescence properties of 6-bromo-2-naphthyl sulfate (BNS) in aqueous solution were studied. The phosphorescence lifetime is several hundred microseconds and is self-quenched. Although a fluorescent photoproduct is formed from BNS, it does not interfere with the decay properties of triplet-state BNS and its utility as a probe of the accessibility of the heme group in heme proteins. Quenching of BNS phosphorescence does not occur for the non-heme protein lysozyme and apomyoglobin but occurs by a dynamic mechanism with a quenching constant of 1-2 x 10(9) M-1 s-1 for cytochrome c and myoglobin and with a quenching constant of 6.2 x 10(9) M-1 s-1 for protoporphyrin IX. The phosphorescence of an inclusion complex of 1-bromonaphthalene and beta-cyclodextrin is not quenched by heme-containing proteins. The temperature and viscosity dependencies of the rate with which BNS phosphorescence is quenched by microperoxidase-11 are consistent with unit quenching efficiency. These results indicate that quenching of BNS phosphorescence occurs only upon contact with the quencher, and the quenching constant can be used to assess the degree of accessibility of the heme group.     

Development of novel antioxidants: design,synthesis, and reactivity

We are attempting to develop novel synthetic antioxidants aimed at retarding the effects of free-radical induced cell damage. In this paper we discuss the design strategy and report the synthesis of seven novel antioxidants, including six catechols and a benzylic phenol. The bond dissociation enthalpy (BDE) for the most active (weakest) OH bond in each molecule was calculated by theoretical methods, as well as the BDE for the semiquinone radical. Reaction rates with the nitrogen-centered free radical DPPH(*) were measured in ethyl acetate. The log of k(DPPH) for bimolecular reaction correlated well with the primary BDE. The correlation between rate constants and calculated BDEs shows that the BDE is a good predictor of antioxidant activity with DPPH(*), suggesting that our design criteria are useful and that these compounds should undergo further testing in cell cultures and in animal models.     

(η5-C5R5)2Fe2(CO)2(μ-CO)(μ-CH2) (R = H,CH3): A convenient one-pot synthesis using chloromethyl pivalate

The compounds (η⁵-C₅R₅)₂Fe₂(CO)₂(μ-CO)(μ-CH₂) (R = H, CH₃) have been prepared through the reaction of chloromethyl pivalate with the appropriate metal anions, η⁵-C₅H₅Fe(CO)₂K and η⁵-C₅Me₅Fe(CO)₂K.     

Synthesis of a deca-lithium cage containing an [(RN)2As(mu-NR)As(NR)2]4- tetraanion; a homologue of group 15 trianions of the type [E(NR)3]3-

The novel, deca-lithium cage [(mtaNHLi)(As2(Nmta)5)-Li(4).2thf]2 (1) (mtaN = 5-methylthiazolyl, C4H4N2S) contains an imido-bridged tetraanion [(mtaN)2As(mu-Nmta)-As(Nmta)2]4-, which represents a new type of multi-functional imido group 15 ligand framework (homologous with group 15 anions of the type [As(NR)3]3-).     

Salting-out chromatography : Aliphatic and polyglycol ethers,carboxylic acids by roger sargent and wm. rieman

Distribution ratios of 15 ethers were determined with various ammonium sulfate eluents and were used to determine the conditions necessary for the separation of five-and seven-component mixtures by salting-out chromatography. The application of this technique was found to be less successful than ion-exchange chromatography for the separation of carboxylic acids.