Cross-metathesis reaction of vinyl sulfones and sulfoxides

Cross-metathesis reactions of α,β-unsaturated sulfones and sulfoxides in the presence of molybdenum and ruthenium pre-catalysts were tested. A selective metahesis reaction was achieved between functionalized terminal olefins and vinyl sulfones by using the ‘second generation’ ruthenium catalysts 1c-h while the highly active Schrock catalyst 1b was found to be functional group incompatible with vinyl sulfones. The cross-metathesis products were isolated in good yields with an excellent (E)-selectivity. Both the molybdenum and ruthenium-based complexes were, however, incompatible with α,β- and β,γ-unsaturated sulfoxides.     

Experimental and computational studies of trialkylaluminum and alkylaluminum chloride reactions with silica

Reactions of trimethylaluminum, triethylaluminum, and diethylaluminum chloride and ethylaluminum dichloride with silica gel have been studied experimentally by infrared spectroscopy and elemental analysis. The silica gel was subjected to different pretreatments to alter surface functionalities prior to reaction. In all cases the extent of surface modification reaction follows the trend unmodified > 600 degrees C pretreated > hexamethyldisilazane (HMDZ) pretreated > 600 degrees C/HMDZ pretreated. All of the aluminum compounds studied completely react non-hydrogen-bonded silanols, while also reacting with hydrogen-bonded silanols and siloxanes. Primarily monomeric surface species result from the surface modification reaction. Ethylaluminum chlorides preferentially react with silanols through cleavage of the Al-C bond rather than the Al-Cl bond. Singly bonded Si(s)-O-AlCl(2) surface species are readily synthesized by reaction of ethylaluminum dichloride with HMDZ-pretreated silica gel. Bridged bonded (Si(s)-O)(2)-AlCl surface species are readily synthesized by reaction of diethylaluminum chloride with HMDZ-pretreated silica gel. Computational ab initio studies of the cluster Si(4)O(6)(OH)(4) as a model to study the reaction of monomeric and dimeric methylaluminum dichloride with a silica silanol are also described. Comparison of the potential energy surface (PES) of monomer and dimer indicates that the energetics favor monomer reaction, consistent with experimental results. The energy cost in the dimer reaction is primarily from cleavage of a bridged Al-Cl bond upon adsorption. This does not occur when the monomer adsorbs. A comparison of the PES for the two reaction pathways resulting from cleavage of either an Al-Cl or Al-C bond indicates that while the former reaction is slightly kinetically favored (E(a) = 23.1 kJ/mol for Al-Cl bond cleavage versus E(a) = 31.1 kJ/mol for Al-C bond cleavage), the latter is strongly thermodynamically favored with an overall free energy difference between the two reaction pathways of 135 kJ/mol favorable to Al-C bond cleavage. These reactions are thermodynamically controlled.     

Separation of silver from waste waters by ion-exchange resins and concentration by microbial cells

Summary Waste waters of film processing plants are rich with silver. Part of the silver is regenerated electrochemically, but the rest (0.5 g) remains in waste waters and is sent to sewers. This is a bad politic from both the environmental (toxic waste waters) and the economical point of view (a waste of silver). In this work, the silver was isolated by ion-exchange resins and then concentrated by microorganisms. For exchange of silver, Ionenaustauscher I, II and IV were used. The batch method was used to obtain a static equilibrium. Silver elution from exchangers is based on silver transformation to a stable cation or anion complex. By varying the ligands, pH and eluent concentrations, optimum elution is found at 1 mol/l Na₂S₂O₃, 1 mol/l NH₃, 2 mol/l HNO₃ and 1 mol/l (NH₂)₂CO. The concentration of silver in the eluent is about 50 mg/l. The silver ion uptake from solutions after ion exchange by mixed bacterial culture isolated from photographic waste water drain and pure bacterial cultures Escherichia coli 3009 and Bacillus subtilis 3053. was studied. Experiments were carried out in submerse culture at pH 7 with different Ag⁺ concentrations (4, 8 and 40 mg/l) on a rotary shaker (100 rpm) at 37°C. At the lower Ag⁺ concentrations a good growth and simultaneous removal of Ag⁺ from the solutions was achieved. At Ag⁺ concentration of 40 mg/l growth and removal of Ag⁺ by mixed and pure culture differed significantly. Thus mixed bacterial culture grew well and at the same time removed efficiently Ag⁺ (approximately 90%) from medium. Pure bacterial cultures on the contrary were unable to grow at 40 mg/l Ag⁺, though their biomass showed to be an effective biosorbent for Ag⁺ (approximately 80% of Ag⁺ removal).     

Synthesis and physico-chemical characterization of coordination compounds of 3d metals with potassium bicyclo[2.2.1]-hept-5-en-endo-2-oyl-hydroxylamine-3-carboxylate

Summary The ligand, potassium bicyclo[2.2.1]-hept-5-en-endo-2-oyl-hydroxylamine-3-carboxylate-monohydrate, KHL·H₂O₂ and its M(HL)₂ complexes, [{Fe(HL)₂}₂SO₄], K[FeL₂] and K₂[ML₂] (M=Mn^II, Fe^II, Co^II, Ni^II, Cu^II and Zn^II) were prepared and characterized. For all, except the sulphate complex of iron(III), a monomeric octahedral configuration was postulated and this is realized through the coordination of oxygen atoms of the carboxylic, carbonyl and oxime group of two mono-or di-anion ligands. The dianionic form of the ligand is the result of deprotonation of the carboxylic group and mide-alcohol form of the hydroxamic group. For the sulphate-containing iron(III) complex a dimeric coordination is proposed with two monoanions of the organic ligand (the carbonyl oxygens are not coordinated) and the bridging SO₄ group. The relative degree of covalency of the metal-carboxylic oxygen bond is 10.6–45.2% and increases in the order: Mn^IIIIIIIIIIIII. The complexes have been characterized by elemental and t.g. analysis and i.r. spectra.     

Versatile high-performance liquid chromatographic computer system for solvent delivery, gradient control and data acquisition using the Commodore 64 personal computer

An interface for a high-performance liquid chromatographic system based on the Commodore 64 personal computer has been designed as an alternative to the expensive and somewhat inflexible solvent programmers and data acquisition systems offered by commercial manufacturers. The system consists of the Commodore 64 with a single disk drive and monitor, and an interface that directly controls the flow-rates of two Waters pumps for solvent delivery in either isocratic or gradient mode, as well as analog-to-digital conversion of chromatographic data and either graphic data output to a dot-matrix printer or digital-to-analog conversion for output to a chart recorder. The interface permits computer-controlled flow-rates of up to 10.0 ml/min, with an accuracy of 0.0047 ml/min at flow-rates of 4.1 ml/min and an accuracy of 0.03 ml/min at flow-rates of 10 ml/min. The software for data analysis permits tabulation of elution times and areas for the peaks in a chromatogram with an option for baseline correction. The data are stored on floppy disks together with information pertinent to the chromatogram (flow-rate, solvent composition, etc.).     

Manganese(III) acetate mediated synthesis of 3-trifluoroacetyl-4,5-dihydrofurans and 3-(dihydrofuran-2(3H)-ylidene)-1,1,1-trifluoroacetones by free radical cyclization. Part 1

2-Trifluoroacetyl-4,5-dihydrofurans were obtained by manganese(III) acetate mediated radical cyclization of trifluoromethyl-1,3-dicarbonyl compounds (1a-c) with conjugated alkenes (2a-h). The reaction of 1,1,1-trifluoropentane-2,4-dione (1a) with propenylbenzene and 1,1-diphenyl-1-butene surprisingly yielded 3-(dihydrofuran-2(3H)-ylidene)-1,1,1-trifluoroacetones besides 3-trifluoroacetyl-4,5-dihydrofurans.     

Effects of temperature and sodium carboxylate additives on mineralization of calcium oxalate in silica gel systems

Urolithiasis remains a major medical problem in China, especially in Guangdong Province in the southest of China[1]. A survey in Shenzhen city, the most southern city in China, showed the incidence of renal calculus was 4.87%, being 6.12% in the males and 4.07% in the females[2]. The prevalence of renal calculus has been more as the age advances and in the male population and so was in the less-educated population. The recurrence rate is more than 80%, with a moderate improvement by conventi…     

Critical Points in a Crystal and Procrystal

The critical points in the model electron density distributions of LiF, NaF, NaCl, and MgO crystals, constructed from accurate X-ray diffraction data, are determined. For LiF and MgO they are compared with those obtained from a Hartree–Fock electron density calculation. Both experiment and theory show the same type of critical points on the bond lines. The topological features in areas between structural units, where the electron density is low and near-uniform, turn out to be model dependent and cannot be established well with the data available. Topological analysis of procrystals (hypothetical systems consisting of spherical atoms or ions placed on the same sites as atoms in real crystal) show that (3, –1) critical points, usually connected with bonding interaction, are observed on interatomic lines in these nonbonded systems as well.     

Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>