Lithiation and electrophilic substitution of 8-chlorodibenz[b,f][1,4]-oxazepine-10-tert-butylcarbamate: The preparation of novel fused heterocyclic derivatives of 8-chlorodibenzoxazepine

Lithiation of 8-chlorodibenz[b,f][1,4]oxazepine-10-tert-butylcarbamate ( 1 ) is described. Electrophilic substitution of the resulting N-Boc dibenzoxazepine α- lithioamine 2 with ketones, aldehydes, nitriles, iso-cyanates and imines, followed by an in-situ cyclization, gave fused carbamates 5–26 , fused 2H-imidazol-2-ones 27–29 , fused hydantoins 30–32 , and fused ureas 33–35 , respectively, in 11–66% yield.     

Voltammetric sizing of a sphere.

The size of a glass sphere positioned in the center of a microdisk electrode is determined by using a simple electrochemical procedure and is confirmed, additionally, by a microscopical measurement of the sphere at the time of the electrochemical measurement. The cyclic voltammetric response of the naked electrode and of the electrode with the sphere positioned in its center is recorded over a wide range of scan rates (0.002-1.5 V s(-1)). The size of the sphere is then determined by comparison of the experimental voltammogram with simulations for each individual scan rate.     

Inverted and suppressed direct response HMQC-TOCSY spectra - a convenient method of spectral editing

HMQC-TOCSY spectra provide a convenient means of establishing proton-proton connectivities in congested spectra of complex aromatic heterocycles. Advantage is taken of the greater dispersion of the ¹³C nmr spectrum to circumvent overlap which would preclude spectral interpretation through the usual COSY spectrum. A recently reported method for inverting direct responses (IDR) in HMQC-TOCSY spectra is demonstrated for [1]benzothieno[2,3-c]naphtho[2,1-g]quinoline. A modification of the IDR-HMQC-TOCSY method is also demonstrated which is capable of fully suppressing direct responses (SDR) without resorting to the timing of the onset of decoupling as in the original report of the HMQC-TOCSY experiment. SDR-HMQC-TOCSY has the further advantage of allowing the use of higher levels of digitization in F₂ than can be attained when broadband heteronuclear decoupling is employed.     

High ionization potential conjugated polymers

We report the synthesis of a series of poly(p-phenylene ethynylene)s (PPEs) with high ionization potentials and associated high excited-state electron affinities. Their photophysical properties were investigated using steady-state and time-resolved fluorescence techniques. The ionization potentials of the polymer thin films were determined using ultraviolet photoelectron spectroscopy (UPS), and those with the highest ionization potentials displayed high sensitivity for the detection of electron-donating aromatic compounds. The effects of sterics, chemical structure, and electronic properties on the polymers' sensory responses were investigated by fluorescence quenching experiments in both solution and solid thin films. In addition, we report that in some cases the excited-state charge-transfer complexes (exciplexes) of the PPEs with analytes were observed. These latter effects provide promising opportunities for the formation of sensitive and selective chemical sensors.     

Analysis of Colubroidea snake venoms by liquid chromatography with mass spectrometry: evolutionary and toxinological implications

The evolution of the venomous function of snakes and the diversification of the toxins has been of tremendous research interest and considerable debate. It has become recently evident that the evolution of the toxins in the advanced snakes (Colubroidea) predated the evolution of the advanced, front-fanged delivery mechanisms. Historically, the venoms of snakes lacking front-fanged venom-delivery systems (conventionally grouped into the paraphyletic family Colubridae) have been largely neglected. In this study we used liquid chromatography with mass spectrometry (LC/MS) to analyze a large number of venoms from a wide array of species representing the major advanced snake clades Atractaspididae, Colubrinae, Elapidae, Homalopsinae, Natricinae, Psammophiinae, Pseudoxyrhophiinae, Xenodontinae, and Viperidae. We also present the first sequences of toxins from Azemiops feae as well as additional toxin sequences from the Colubrinae. The large body of data on molecular masses and retention times thus assembled demonstrates a hitherto unsuspected diversity of toxins in all lineages, having implications ranging from clinical management of envenomings to venom evolution to the use of isolated toxins as leads for drug design and development. Although definitive assignment of a toxin to a protein family can only be done through demonstrated structural studies such as N-terminal sequencing, the molecular mass data complemented by LC retention information, presented here, do permit formulation of reasonable hypotheses concerning snake venom evolution and potential clinical effects to a degree not possible till now, and some hypotheses of this kind are proposed here. The data will also be useful in biodiscovery.     

Conformational preferences of 34 valence electron A2X4 molecules: An ab initio Study of B2F4, B2Cl4, N2O4, and C2O

Ab initio molecular orbital structures and energies of B₂F₄, B₂Cl₄, N₂O₄, and C₂O have been calculated for both perpendicular D_2d and planar D_2h rotamers. The experimental trend toward greater preference for the D_2d forms in going from B₂F₄ to B₂Cl₄ is reproduced. N₂O₄ favors the planar conformation, although the rotation barrier is overestimated at the theoretical levels used. The oxalate dianion is calculated to be more stable in the D_2d conformation; the experimental planar arrangement in the solid may be due to crystal packing forces. The preferences for one conformation over another are small; analysis indicates that different effects may predominate in each case: π stabilization for B₂F₄, hyperconjugation for B₂Cl₄, lone-pair interactions for N₂O₄, and electrostatic repulsions for C₂O.     

Bipolar pulse conductometric monitoring of ion-selective electrodes: Part 1. Method development with a calcium-selective electrode and elucidation of the basic principles involved

The potential generated by a plastic-membrane calcium ion-selective electrode (i.s.e.) is shown to be indirectly measurable by a non-zero current method based on bipolar pulse conductance. Linear current—voltage curves are obtained using 0–5-V pulses; the current axis intercept is related to the i.s.e. potential. A simple electrical contact (e.g., platinum or stainless steel) can be used instead of a poised reference electrode as the counter electrode in this two-electrode system. Long-term exposure of the i.s.e. to calcium solutions causes an upward drift in the measured current. This drift is minimized by avoiding long exposure times to solution, rinsing the electrode between measurements, and constructing current—voltage curves for determination of the current axis intercepts. Voltage pulses lasting 100 μs are optimum for this method. Shorter pulses are subject to error from capacitive charging currents, and longer pulses yield poorer precision, and degrade the electrode through faradaic reactions. The measured signal is dependent upon Ca²⁺ concentration (rather than activity), making ionic strength adjustment unnecessary. The concentration dependence is induced by application of voltage pulses greater than ~ 15 mV in amplitude. Selectivities of the potentiometric and conductometric methods are shown to be comparable for a variety of interfering monovalent and divalent cations. The conductometric method yields a fast i.s.e. response because of induced migration of Ca²⁺ into the membrane. Response time decreases as the pulse height increases. Pulses greater than 2 V in magnitude yield response times limited by the solution mixing time rather than by the electrode.     

Functional polymers and sequential copolymers by phase transfer catalysis. XXVI. Synthesis and characterization of thermotropic liquid crystalline polypodants

Thermotropic liquid crystalline (LC) polyethers and copolyethers have been synthesized from 4,4′-dihydroxy-α-methylstilbene (HMS) and α,ω-dichlorooligo(oxyethylene)s having between 2 and 5 as well as 8.7 oxyethylene units. Copolyethers were prepared from a 1:1 mol/mol ratio of two dissimilar spacers. These polymers have been prepared by a phase transfer catalyzed (PTC) polyetherification of bisphenols with these electrophiles by utilizing 50 mol% tetrabutylammonium hydrogen sulfate per phenol group. Kinetic experiments with either 5 or 50 mol% catalyst vs phenol groups in the polyetherification of 4,4%-isopropylidenediphenol with 2-chloroethyl ether have shown that a change in catalyst primarily affects the rate of reaction, with 50 mol % being faster. The prepared polyethers and copolyethers are soluble in common organic solvents. Both polyethers and copolyethers are crystalline. Polymers prepared to contain tetraoxyethylene spacers exhibit monotropic LC behavior. Copolymers prepared to contain tri- and tetraoxyethylene spacers (1 : 1 mol/mol) [PE34] were the only polymers exhibiting enantiotropic LC behavior. Longer spacers tend to destabilize the phase transitions, as suggested by the dependence of thermal transition temperatures upon the differential scanning calorimeter rate. All prepared polymers act as podants in solution, measured by picrate extraction experiments. Solid state complexes have been prepared from the polymer with a pentaoxyethylene spacer [PE5] and PE34 with LiCF₃SO₃. PE5 can dissolve LiCF₃SO₃ in the range of 0.21–2.2 mol salt/mol polymer (m.r.u.) [S/P] without the observation of free salt. PE5 complexes of/or below S/P of 0.43, upon annealing at room temperature, exhibited the two melting transitons observed in the polymer alone. PE5 complexes of/or above S/P of 0.77 only exhibited a T_g. The T_g of PE5 complexes were found to change nonlinearly with S/P, while T_m1 changed linearly. T_m2 was independent of S/P. Only one complex with PE34 gave two transitions (T_m2,Tⁱ) in dynamic DSC experiments. Other PE34 complexes followed a behavior similar to PE5 complexes.     

S)-(+)-2-(p-tolylsulfinyl)-2-buten-4-olide: an enantiomerically pure Michael acceptor for asymmetric synthesis of 3-substituted 4-butanolides. (—)-podorhizon.

A short, reliable, and practical synthesis of ($\text{S}$)-(+)-2-($\text{p}$-tolylsulfinyl)-2-buten-4-olide has been developed, and the utility of this Michael acceptor for highly enantiocontrolled synthesis of 3-substituted 4-butanolides has been demonstrated.