Determination of “solvent” concentration in “chromatographic solutions” on the cellulose sorbents

An attempt was undertaken to furnish an entirely quantitative characteristics to the thermodynamic model of the chromatographic system presented in (2). The attempt proved to be successful and one managed to establish simultaneously a new method enabling direct determination of the hydrogen-bond enthalpy from the PC experimental results.     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.     

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.     

Texture changes inside smectic-C droplets in azobenzene Langmuir monolayers

Preparation of Langmuir monolayers of a mixture of trans- and cis-isomers of an azobenzene derivative, 4-[4-[(4-octylphenyl)azo]phenoxy]butanoic acid, results in the segregation of birefringent trans-isomer domains embedded in an isotropic medium of cis-isomers. Brewster angle microscopy observations allow us to identify different textures inside the domains depending on surface pressure, temperature, and domain size. The evolution of the monolayer in the dark, from initial droplets formed after spreading to a stable stripe texture, is described. The dynamics of domain coalescence and some morphological transitions induced by temperature and surface pressure changes are also discussed. A simple theoretical model is included to supplement some of these experimental observations.     

Bestimmung der Aktivitätskoeffizienten im chromatographischen Modell „binärer Lösungen“

An explanation is given for the two possible ways of determination of the activity coefficients of solutes, when applying a new thermodynamic model of adsorption and partition chromatography, i. e. the binary solutions model.

     

Structural Study of C-undecylcalix[4]resorcinarene Solvate with Dioxane

The crystal structure of the molecular complex of C-undecylcalix[4]resorcinarene with dioxane has been determined by X-ray analysis. The asymmetric unit contains one host and four guest molecules. The calix[4]resorcinarene moiety adopts a bowl conformation with C_4v symmetry. Four undecyl chains are axially oriented. Calix molecules are packed in a bowl-to-bowl fashion with alternating hydrophilic and hydrophobic layers. One of the hydrophilic dioxane molecules is located at the rim of the calix moiety and is hydrogen bonded to the other one. There is no interaction to attract, or direct the dioxane molecule into the interior of the cavity. There is an exo complex formed. The dioxane molecules – located in the hydrophobic part – are highly disordered.     

Spectroscopic properties of the photoproducts of pyridoxal-5′-P irradiation: Catalytic site recognition of ribonuclease A

Photoproducts of pyridoxal-5-P, i.e., 4-pyridoxic-5-P and bis-pyridoxal-5-P, have been studied by spectroscopic methods. The spectroscopic properties of bis-pyridoxal-5-P (bis-PLP) resemble those of pyridoxal-5-P (PLP) under similar experimental conditions. The coupling of methylen hydrogens to the phosphorus atom has been shown by NMR spectroscopy. The singlet in the³¹P-NMR spectra and the triplet in¹H-undecoupled experiments confirm the presence of the phosphate group in the 5 position of the structure of the vitamin. The effect of pH and solvent composition on the relative distribution of species of bis-pyridoxine-5-P (bis-PNP) has been investigated by absorption and fluorescence spectroscopy. The acid-base dissociation of the phosphate group is easily detected by emission spectroscopy. Bis-PNP and bis-PLP bind to the enzyme RNase A and they behave as competitive inhibitors with respect to the substrate cytidine-2-3-cyclic phosphate. The natural forms of vitamin B₆, pyridoxine, and pyridoxine-5-P have no effect on the catalytic activity of the protein. Experimental evidence derived from fluorescence and inhibition experiments is consistent with the hypothesis that bis-PNP recognizes the catalytic site of RNase A.     

Magnetic resonance of the weak organic magnet TDAE-C60

The charge transfer compound TDAE-C₆₀ (TDAE — tetrakis-dimethylamino-ethylene) is so far the only known C₆₀ based molecular ferromagnet. The ESR spectra of TDAE-C₆₀ single crystals demonstrate that freshly grown regularly shaped single crystals show at first an AFM (antiferromagnetic)-like behavior which changes upon annealing at room temperature in vacuum to a FM (ferromagnetic) one. It thus seems that annealing induces a change in the relative orientation of the distorted C ₆₀ ^? ions resulting in a change in the sign of the effective magnetic interactions between neighboring C ₆₀ ^? ions. A structural transition in the TDAE methyl protons at 250 K seems to be connected with this process. Here we review the structure, the ESR spectra, the proton NMR spectra and the¹³C NMR spectra of TDAE-C₆₀.