Temperature dependence of the Raman spectra of Bi2Te3 and Bi0.5Sb1.5Te3 thermoelectric films

The temperature dependence of the Raman spectra of Bi₂Te₃ and Bi_0.5Sb_1.5Te₃ thermoelectric films was investigated. The temperature coefficients of the E_g(2) peak positions were determined as –0.0137 cm^–1/°C and –0.0156 cm^–1/°C, respectively. The thermal expansion of the crystal caused a linear shift of the Raman peak induced by the temperature change. Based on the linear relation, a reliable and noninvasive micro‐Raman scattering method was shown to measure the thermal conductivity of the thermoelectric films. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electronic transport properties of zigzag carbon- and boron-nitride-nanotube heterostructures

Using first-principles density functional theory and non-equilibrium Green's function formalism for quantum transport calculation, we have investigated the electronic transport properties of heteronanotubes by joining a zigzag (6,0) carbon nanotube and a zigzag (6,0) boron nitride nanotube with different atomic compositions and joint configurations. Our results show that the atomic composition and joint configuration affect strongly the electronic transport properties. Obvious negative differential resistance behavior and large rectifying behavior are obtained in the heterostructure with certain composition and joint configuration. Moreover, tube length and tube radius can affect strongly the observed NDR and rectifying behaviors. The observed negative differential resistance and rectifying behaviors are explained in terms of the evolution of the transmission spectrum with applied bias combined with molecular projected self-consistent Hamiltonian states analysis.     

Domain,dielectric and optical studies in antiferroelectric (Pb,La) (Zr,Sn, Ti)O3 single crystals

Antiferroelectric (Pb, La) (Zr, Sn, Ti)O₃ (PLZST) single crystals have been successfully grown by flux method using PbO–PbF₂–B₂O₃ as the flux. The obtained crystals are pale yellow in color and translucent. Domain structures, dielectric constants and optical transmission measurements have been performed on the 〈001〉-oriented PLZST single crystals. Two types of domains, namely, 90° and 180° domains, are observed. The extinction of 90° domains at P/A: 0° reveals a tetragonal structure in the crystal. The sequence of phase transitions from antiferroelectric to ferroelectric and then paraelectric has been established with increasing temperature. According to the modified Curie–Weiss relationship, the PLZST crystal is in an intermediate state between normal and relaxor antiferroelectrics. The broad optical transparent region (from 0.4 to 7.0 μm) and high optical transmittance (up to 65%) indicate that PLZST crystals are promising for optical uses.     

A facile strategy to synthesize bimetallic Au/Ag nanocomposite film by layer-by-layer assembly technique

A facile strategy has been developed for the preparation of bimetallic gold–silver (Au–Ag) nanocomposite films by alternating absorption of poly-(ethyleneimine)–silver ions and Au onto substrates and subsequent reduction of the silver ions. The composition, micro-structure and properties of the {PEI–Ag/Au}_n nanocomposite films were characterized by ultraviolet visible spectroscopy (UV–vis), transmisson electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), surface enhanced Raman scattering (SERS) and cyclic voltammetry (CV). The UV–vis characteristic absorbances of {PEI–Ag/Au}_n nanocomposite thin film increase almost linear with the number of bilayers, which indicates a process of uniform assembling. Appearance of a double plasmon bands in the visible region and the lack of apparent core–shell structures in the TEM images confirm the formation of bimetallic Au–Ag nanoparticles. The result of XPS also demonstrates the existence of Ag and Au nanoparticles in the nanocomposite films. TEM and FESEM images show that these Ag and Au nanoparticles in the films possess sphere structure with the size of 20–25 nm. The resulting {PEI–Ag/Au}_n films inherit the properties from both the metal Ag and Au, which exhibits a unique performance in SERS and electrocatalytic activities to the oxidation of dopamine. As a result, the {PEI–Ag/Au}_n films are more attractive compared to {PEI–Ag/PSS}_n and {PEI/Au}_n films.     

Simultaneous near field imaging of electric and magnetic field in photonic crystal nanocavities

The insertion of a metal-coated tip on the surface of a photonic crystal microcavity is used for simultaneous near field imaging of electric and magnetic fields in photonic crystal nanocavities, via the radiative emission of embedded semiconductor quantum dots (QD). The photoluminescence intensity map directly gives the electric field distribution, to which the electric dipole of the QD is coupled. The magnetic field generates, via Faraday's law, a circular current in the apex of the metallized probe that can be schematized as a ring. The resulting magnetic perturbation of the photonic modes induces a blue shift, which can be used to map the magnetic field, within a single near-field scan.     

Super-thin cloaks mediated by spoof surface plasmons

We demonstrated the possibility of designing super-thin electromagnetic cloaks based on spoof surface plasmon (SSP). Using a metamaterial layer, incident waves can be coupled into SSP efficiently at the air/metamaterial interface. Due to the strong surface confinement of SSP, EM waves are squeezed into and propagate in deep sub-wavelength scales. Implementation of an 8.2 GHz cloak less than 1/50 the cloaking diameter was presented using split ring resonator (SRR). Excellent cloaking effect was verified by simulations. Rather than isolating objects from the background, such cloaks can drastically enhance the field intensity around the cloaked object. This is of particular importance in applications such as weak wave detection and near-field sensing.     

Self-limited growth of the CaF nanowire on the Si(5 5 12)-2 × 1 template

The atomic structure and interfacial bonding of the ordered-and-isolated CaF nanowires on Si(5 5 12)-2 × 1 have been disclosed by scanning tunneling microscopy and synchrotron photoemission spectroscopy. Initially, CaF molecules dissociated from thermally deposited CaF₂ molecules are adsorbed preferentially on the chain structures of Si(5 5 12)-2 × 1 held at 500 °C. With increasing CaF₂ deposition amount, one-dimensional (1D) CaF nanowires composed of (113) and (111) facets are formed. The line density of these CaF nanowires increases as a function of deposition amount. Finally, at a submonolayer coverage, the surface is saturated with these 1D nanowires except for the (225) subunit, while the original period of Si(5 5 12)-2 × 1, 5.35 nm, is preserved. It has been deduced by the present studies that, owing to these preferential adsorption of CaF and facet-dependent growth of a CaF layer within a unit periodic length of Si(5 5 12)-2 × 1, such a self-limited growth of the CaF nanowire with a high aspect ratio becomes possible.     

Growth and vibrational properties of MnOx thin films on Rh(111)

The growth, structures, and vibrational properties of ultrathin manganese oxide films on Rh(111) had been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED), low energy ion scattering spectroscopy (LEIS) and Auger electron spectroscopy (AES). MnO_x grew in a layer-by-layer fashion on the Rh(111) surface. HREELS phonon features and XPS binding energies showed that an OMnO like tri-layer formed initially. Which was stable on the Rh(111) surface with MnO_x coverage less than one monolayer. At above one monolayer, Mn₃O₄ was preferred as indicated from a four-phonon feature peaked at 13.3, 39, 68 and 83 meV in HREELS. Higher temperature oxidation and annealing were found to improve the long-range order of the MnO_x films.     

Low-temperature electrolytic coloration and spectral property of ammonium alum crystals

Ammonium alum crystals are colored electrolytically using a pointed cathode and a flat anode at low temperatures and under various voltages. SO₃^?, SO₂^? and O₃^? hole-trapped centers are produced in colored ammonium alum crystals. Characteristic absorption bands of SO₃^?, SO₂^? and O₃^? hole-trapped centers are observed in absorption spectra of colored ammonium alum crystals. Production and conversion of hole-trapped centers are explained. Current–time curves for electrolytic coloration of ammonium alum crystal and their relationship with electrolytic coloration process are given.