Radiation-induced emulsion polymerization of ethylene. I. Effect of reaction conditions on the polymerization

The effect of reaction conditions on the rate of radiation-induced emulsion polymerization of ethylene was studied by use of a 500-ml autoclave. Among various kinds of emulsifiers, a series of potassium salts of fatty acids gave high rates of the polymerization. The polymerization was inhibited by the presence of oxygen, but the rate of polymerization followed by the induction period was not influenced by the initial presence of oxygen. Stirring rate and the monomer: water ratio did not affect the rate of polymerization. The rate of polymerization was maximum at about 80°C, and number-average molecular weight was influenced by the temperature in a similar manner as the rate of polymerization. This suggests that the change of mobility of propagating radical in the polymer particle changes the rate of termination reaction. The rate of polymerization was proportional to the 1.7 power of the reaction pressure.     

Electronic states of pyrene single crystal and of its single molecule inserted in a molecular vessel of cyclodextrin

Highly purified single crystals of pyrene were made by a gas phase crystal growth method from 180 times of zone-refined pyrene. The absorption spectra of the single crystal have been transformed from the reflection spectra between 2.5 and at 2, and room temperature. The dry powder of β-cyclodextrin including pyrene single molecule were prepared in vacuum to investigate the electronic states of the isolated molecule. The absorption spectra of the single molecule show similar spectra to those of the single crystal. The pyrene molecule keeps its electronic character even in the single crystal.     

Synthesis of ordered copolyamides by the interfacial polycondensation of the hydrolyzate of bisimidazoline with diacid chloride

Ordered copolyamides were prepared by the interfacial polycondensation of the hydrolyzate of bisimidazoline in the aqueous solution with diacid chloride in chloroform solution; bisimidazolines used were 1,4-bis(imidazoline-2-yl)butane and 1,4-bis(imidazoline-2-yl)-octane; diacid chlorides used were adipoyl chloride, sebacoyl chloride, and terephthaloyl chloride. The aqueous solutions of the hydrolyzates of bisimidazolines were prepared by heating the aqueous solutions of imidazolines at 70°C. It was shown by infrared spectra and paper electrophoresis of the hydrolyzates that bisimidazolines were hydrolyzed to give quantitatively diamines containing amides linkages of the type H₂N(CH₂)₂NH-CORCONH(CH₂)₂NH₂. The regularity in the sequence of the copolyamide of nylon 26 and nylon 2T prepared from the hydrolyzate of 1,4-bis(imidazoline-2-yl)butane and terephthaloyl chloride was studied by NMR spectrometry: it was concluded that the copolyamide was highly ordered.     

Highly efficient asymmetric transfer hydrogenation of ketones catalyzed by chiral ‘roofed’ cis-diamine-Ru(II) complex

A new type of chiral Ru(II) complex, prepared from a conformationally rigid, sterically bulky ‘roofed’ cis-diamine and [RuCl₂(benzene)]₂, functions as an efficient catalyst for the asymmetric transfer hydrogenation of a wide variety of aryl ketones, including sterically bulky ketones, when the reaction is conducted in the presence of 5HCO₂H·2NEt₃.     

3-acyl-2-oxazolone-zirconium complexes as excellent reagents for highly regioselective acylation of polyalcohols

In combination with 3-acyl-2-oxazolones, zirconium complexes such as zirconium acetylacetonate and zirconocene chloride hydride-Mg serve well as effective catalysts for regioselective acylation of polyalcohols including 1,2-diols to permit highly preferential protection of primary hydroxyl groups.     

Radiation-induced heterogeneous polymerization of methyl methacrylate in precipitants

The radiation-induced heterogeneous polymerization of methyl methacrylate in various precipitants, mainly methyl alcohol, was carried out, and the effects of reaction conditions on the polymerization behavior and the molecular weight distribution of polymer were studied. Bimodal molecular weight distributions were found for the polymer produced by the heterogeneous polymerizations in methyl alcohol and in tert-butyl alcohol. The apparent activation energy is 1.0 and 4.5 kcal/mole, respectively, for the polymerization at a monomer concentration of 10 vol-% in methyl alcohol above and below 35°C. The polymerization at a monomer concentration lower than 40 vol-% in methyl alcohol proceeded with the precipitation of polymer. The dose rate exponent of the mean rate of heterogeneous polymerization decreased from 0.5 to a smaller value as the polymerization progressed. The ratio of the two peaks in the bimodal molecular weight distributions of polymer produced in methyl alcohol was affected by the reaction conditions. These results show the coexistence in the polymerizations of two different physical states of propagating chain, a loose state and a rigid one. The reaction scheme is discussed in connection with the physical factors which affect the solubility or the mobility of propagating chains, and the rate of elementary reactions, which influences the degree of propagating chains.     

Synthesis of polyamides by the polyaddition of bissuccinimides with diamines

Polyamides which contain succinamide units, ? NHCO? (CH₂)₂? CONH? were prepared by the ring-opening polyaddition of bissuccinimides with diamines at 200°C. in bulk. Nylon 24 and nylon 64 were prepared by the reaction of N,N′-ethylenedisuccinimide with ethylenediamine and of N,N′-hexamethylenedisuccinimide with hexamethylenediamine, respectively. It was suggested that the transamidation reaction by aminolysis influenced the detailed structures of the polymers prepared from N,N′-ethylenedisuccinimide and hexamethylenediamine and from N,N′-hexamethylenedisuccinimide and ethylenediamine. The detailed structures of the polymers are discussed on the basis of their melting points and x-ray diagrams. It is concluded that the polymers contain a crystalline portion of \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--}[{\rm NH \hbox{--} (CH}_2 {\rm)}_{\rm 2} {\rm \hbox{--} NHCO \hbox{--}}({\rm CH}_2)_2 {\rm \hbox{--} CONH \hbox{--}}({\rm CH}_2)_6 {\rm \hbox{--} NHCO \hbox{--}}({\rm CH}_2)_2 {\rm \hbox{--} CO\rlap{---}]} $\end{document} sequences.     

Effect of amount of medium on the radiation-induced polymerization of ethylene in tert-butyl alcohol

The kinetics of the radiation-induced polymerization of ethylene in the presence of various amounts of medium (tert-butyl alcohol containing 5 vol-% of water) was studied, and the effect of the amount of medium on the polymerization was investigated. The polymerization was carried out by use of a reactor of 100 ml capacity under the following conditions: temperature, 24 ± 3°C; pressure, 200 kg/cm²; dose rate, 2.0 × 10⁴?1.6 × 10⁵ rad/hr. The amount of polymerized monomer and the rate of polymerization were maximum when about 50 ml of the medium was used. Data obtained with the use of 30, 50, and 90 ml of the medium were analyzed kinetically and the rate constants of each elementary reaction were determined by the method based on a reaction mechanism which contains both first- and second-order terminations for the concentration of propagating radical. These results were compared with those obtained with the use of 70 ml of the medium already reported in the previous paper. The dose rate exponents of the rate of polymerization were about 0.7–0.8. It was found that G values for the initiation of ethylene and the medium were 1.5 and 3.8, respectively, and the rate of propagation was proportional to the fugacity of ethylene. It is supposed that the medium plays an important role in the first-order termination, because the apparent rate constant of the reaction was larger when a larger amount of medium was used.