Miscibility of calcium chloride and sodium dodecyl sulfate in the adsorbed film and aggregates

The adsorption, micelle formation, and coagel-particle formation of sodium dodecyl sulfate in the presence of calcium chloride were studied from the viewpoint of mixed adsorption and aggregate formation of inorganic salt and surfactant. Judging from the phase diagrams of adsorption and aggregate formation, negative azeotropy takes place in the mixed adsorption and aggregate formation of calcium chloride and sodium dodecyl sulfate due to electrostatic attraction between calcium and dodecyl sulfate ions. The miscibility of calcium chloride and sodium dodecyl sulfate in the oriented states increases in the order, particle > adsorbed film > micelle. The difference in the miscibility was ascribed to the difference in geometry between the adsorbed film and micelle and to the interaction between bilayer surfaces in the particle. The particle-micelle equilibrium was thermodynamically considered by using the equilibrium composition of aggregates.     

Molecular weight dependence of LB morphology of poly(n-hexyl isocyanate) (PHIC)

The morphologies of Langmuir-Blodgett (LB) films of two fractionated poly(n-hexyl isocyanate) (PHIC) and those of their binary mixtures were observed by AFM, together with those of an unfractionated PHIC. The low molecular weight PHIC formed random packing of bundles consisting of rigid rods, while the high molecular weight PHIC formed random packing of bundles consisting of hairy rods. Bundle interpenetration was observed only for the latter in the semidilute regime. In the bilayer region, the area occupied by the PHIC bundles in the upper layer was obviously smaller for the high molecular weight PHIC than for the low molecular weight PHIC, suggesting that the bundles of high molecular weight PHIC more easily interpenetrate than those of low molecular weight PHIC. For the blended films composed of both low and high molecular weight PHICs, the characteristic morphologies of the respective PHIC samples were no longer present. Moreover, the morphologies of the blended films appeared to resemble each other at any molar fraction owing to the ideal miscibility of the low molecular weight and high molecular weight PHICs. The morphologies of the blended films were also similar to that of the unfractionated PHIC film in the dilute regime. In the semidilute regime, the blended films became rounded owing to an increase in bundles interpenetration between PHICs as compared to that in the dilute regime, whereas the morphology of unfractionated PHIC films remained unchanged as compared to that in the dilute regime.     

Spectrophotometric determination of cobalt(II) and cyanocobalamin with vanillilfluorone and its applications

Spectrophotometric determination of cobalt(II) was accomplished with vanillilfluorone (VF) in the presence of dimethylbenzyltetradecylammonium chloride (Zephiramine, Zep). In the determination of cobalt(II), Beer's law was obeyed in the range of 24-470 ng/ml, with an effective molar absorption coefficient (at 575 nm) and relative standard deviation of 1.35×10(5) l mol(-1) cm(-1) and 0.66% (n=5), respectively. The composition ratio of the colored complex was determined by the mole ratio and continuous variation methods, and it was found to be Co(II) : VF : Zep=1 : 2 : 4. Analysis of cyanocobalamin by the same procedure showed that cyanocobalamin could be determined in the concentration range of 0.5-0.11 μg/ml using the proposed method.     

Reactive N-protonated isocyanate species stabilized by bis(μ-hydroxo)divanadium(IV)-substituted polyoxometalate

O- or N-protonated? The bis(μ-hydroxo)divanadium(IV)-substituted γ-Keggin-type polyoxometalate (see picture, left) (TBA)(4)[γ-SiV(IV)(2)W(10)O(36)(μ-OH)(4)] (TBA = tetra(n-butyl)ammonium) was synthesized and characterized by X-ray crystallography. Its reaction with phenyl isocyanate gave (TBA)(4)[γ-SiV(IV)(2)W(10)O(38)(μ-OH)(2)(PhNHCO)(2)], which contains two N-protonated phenyl isocyanate species and catalyzes the cyclotrimerization of phenyl isocyanate.     

Synthesis of monodispersed molecularly imprinted polymer particles for high-performance liquid chromatographic separation of cholesterol using templating polymerization in porous silica gel bound with cholesterol molecules on its surface

Monodispersed molecularly imprinted polymer particles selective for cholesterol were prepared by the copolymerization of styrene and divinylbenzene in the presence of template silica gel particles (particle size: 5 μm; pore size: 10 nm) functionalized with cholesterol on the surface, followed by dissolution of the cholesterol-bonded silica gel with a NaOH aqueous solution. Transmission and scanning electron micrographs of the molecularly imprinted polymer (MIP) particles revealed good monodispersity and porous structure. The MIP particles were packed into a high performance liquid chromatographic column, and its recognition ability of cholesterol was evaluated using cholesterol, cholesterol esters and fatty acid methyl esters by comparison with the non-imprinted polymer (NIP) particles prepared from styrene and divinylbenzene without cholesterol. The MIP particles showed a high affinity for cholesterol and cholesterol esters (K(MIP)'/K(NIP)' > 5.7).     

Structural and optical properties of Zn(Mg,Cd)O alloy films grown by remote-plasma-enhanced MOCVD

We report the structural and optical properties of wurtzite-structure Zn(Mg,Cd)O ternary alloys. Wurtzite (0 0 0 1) Zn_1−xCd_xO and Mg_yZn_1−yO films were grown on (11–20) sapphire substrates using remote-plasma-enhanced metalorganic chemical vapor deposition. The large bowing parameters of Zn_1−xCd_xO and Mg_yZn_1−yO ternary alloys are 3.0 and 3.5, respectively, which reflects the large difference of each binary’s electronegativity. We have analyzed the broadening of photoluminescence (PL) in Zn(Mg,Cd)O alloys on alloy content by taking into account the statistical alloy fluctuation and the localization of the exciton, and have clarified that the localization of the exciton strongly affects to PL full-width at half-maximum (FWHM) in Zn(Mg,Cd)O alloys. The alloy broadenings in steady-state PL of Zn(Mg,Cd)O alloys are in good agreement with the calculated tendency by the theoretical model based on the statistical alloy fluctuation, while PL FWHM of Zn_1−xCd_xO is three times larger than the calculated results. Moreover, as another way to confirm alloy broadening, we also have done time-resolved PL measurements and derived the localized depth of the exciton in ZnO-based system, indicating a good agreement with the tendency of PL FWHM broadening.     

Biosensing using lipid bilayers suspended on porous silicon

We demonstrate for the first time the formation of a fluid lipid bilayer membrane on mesoporous silicon substrates for bioapplications. Using fluorescence recovery after photobleaching, the diffusion coefficients for the bilayers supported on oxidized, amino-, and biotin-functionalized mesoporous silicon were determined. The biodetection of a single human umbilical vein endothelial cell was accomplished using confocal microscopy and exploiting Foerster resonance energy transfer effects after the incorporation of RGD covalently linked lipid soluble dyes, with fluorescence donor and acceptor components, within the fluid membrane. A signal response of greater than 100% was achieved via the clustering of RGD peptides binding with areas of high integrin density on the surface of a single cell. These results are a testament to the usefulness of such functional molecular assemblies, based on mobile receptors, mimicking the cell membrane in the development of a new generation of biosensors.     

Spontaneous resolution of aromatic sulfonamides: effective screening method and discrimination of absolute structure

An effective screening method combining parallel synthesis and solid-state CD measurements was established to identify achiral aromatic sulfonamides that show spontaneous resolution with rapidity. We found that 4 of the 12 achiral sulfonamides crystallized as chiral crystals through this method. The chirality of each sulfonamide was discriminated by solid-state CD spectra and Flack parameter in an X-ray analysis. Correspondence between the observed Cotton effect and the absolute configuration could be confirmed by time-dependent DFT calculations. [structure: see text]     

Evaluation of diffusional anisotropy and microscopic structure in skeletal muscles using magnetic resonance

The pulsed-gradient spin-echo (PGSE) nuclear magnetic resonance (NMR) method is used for detecting the diffusion of water molecules in biological tissues. Because tissues generally have diffusional anisotropy, their diffusion properties are denoted by a tensor. In this study, we evaluated the diffusional anisotropy and microscopic structure in atrophied skeletal muscles using the PGSE NMR method. The left sciatic nerve was severed in twelve 9-week-old rats. Neurotomy caused neurogenic muscular atrophy at the left gastrocnemius. At 2, 4 and 8 weeks after neurotomy, magnetic resonance signals were selectively acquired from a 2 x 2 x 2 mm(3) voxel, which was located on the left gastrocnemius. The diffusion tensor, the mean diffusivity (MD) and the fractional anisotropy (FA) were calculated from the signals. A theoretical model of the diffusion in muscles was derived from Tanner's equation. The muscle fiber diameter was estimated by fitting the model to the measured signals. The measurements were also performed for normal rats as controls. No significant difference was found in the MD and the estimated intracellular diffusion coefficient between the control group and the denervated group. The denervated group had significantly higher FA compared with the control group (P<.05). The estimated muscle fiber diameter of the denervated group was significantly smaller than the estimated value of the control group (P<.05). These differences were found at 8 weeks after neurotomy. The proposed method is effective for evaluating changes in the microscopic structure of skeletal muscles.     

Four different types of hydrogen bonds observed in 1,2-bis(N-benzenesulfonylamino)benzenes due to conformational properties of the sulfonamide moiety

The crystal structures of 1,2-bis(N-benzenesulfonylamino)benzenes with secondary and/or tertiary sulfonamide groups were determined by X-ray crystallographic analysis. Every Ar-sulfonamide group existed in synclinal conformation in the crystals even though it was secondary or tertiary. Each compound showed different types of hydrogen bonds in the crystal structure. 1,2-Bis(N-benzenesulfonylamino)benzene (1) formed two double hydrogen bonds connected to the next molecules, 1-(N-benzenesulfonylamino)-2-(N-benzenesulfonyl-N-methylamino)benzene (2) contained double hydrogen bond involved by both the sulfonamide moieties, 1,2-bis(N-4-toluenesulfonylamino)benzene (3) had both intra- and intermolecular hydrogen bonds, and 1-(N-methyl-N-4-toluenesulfonylamino)-2-(N-4-toluenesulfonylamino)benzene (4) had one double hydrogen bond involved by only one sulfonamide moiety. Sulfonamides 1 and 3 formed infinite arrays of the molecules, and sulfonamides 2 and 4 formed racemic dimer of their conformational enantiomers via the hydrogen bonds.